Abstract:p-nitrophenol (pNP) is a highly toxic organic compound and is considered carcinogenic and mutagenic. It is a very stable compound with high resistance to chemical or biological degradation. As a result, the elimination of this pollutant has been very challenging for many researchers. Catalytic reduction is one of the most promising techniques, if a suitable catalyst is developed. Thus, this work aims to prepare an eco-friendly catalyst via a simple and low-cost route and apply it for the conversion of the toxic p-nitrophenol (pNP) into a non-toxic p-aminophenol (pAP) that is widely used in industry. Manganese oxide was prepared in an environmentally friendly manner with the aid of Lawsonia inermis (henna) extract as a stabilizing and capping agent and loaded on the surface of 13X molecular sieve zeolite. The UV-Vis spectrum, EDS, and XRD patterns confirmed the formation of the pure MnO2 loaded on the zeolite crystalline network. The TGA analysis showed that the samples prepared by loading MnO2 on zeolite (Mn2Z, Mn3Z, and Mn4Z) lost more mass than pure MnO2 (Mn) or zeolite (Z), which is mainly moisture adsorbed on the surface. This indicates a better dispersion of MnO2 on the surface of zeolite compared to pure MnO2, and thus a higher number of active adsorption sites. SEM images and EDS confirmed the dispersion of the MnO2 on the surface of the zeolite. Results showed a very fast reduction rate, following the order Mn2Z > Mn3Z > Mn4Z > Mn > Z. With sample Mn2Z, 96% reduction of pNP was achieved in 9 min and 100% in 30 min. For Mn3Z, Mn4Z, and Mn, 98% reduction was achieved in 20 min and 100% in 30 min. Zeolite was the slowest, with only a 40% reduction in 30 min. Increasing the amount of zeolite in the synthesis mixture resulted in lower reduction efficiency. The kinetic study indicated that the reduction of p-nitrophenol on the surface of the prepared nanocomposite follows the pseudo-first-order model. The results show that the proposed nanocomposite is very effective and very promising to be commercially applied in water treatment, due to its low cost, simple synthesis procedure, and reusability.

Chitosan Stabilised Nanozero-Valent Iron for the Catalytic Reduction of P-Nitrophenol

Enhanced reduction of p-nitrophenol by zerovalent iron modified with carbon quantum dots

Synthesis and Characterization of Chitosan-Copper Nanocomposites and Their Catalytic Properties for 4-Nitrophenol Reduction.

High-efficient Catalytic Reduction of 4-Nitrophenol Based on Reusable Ag Nanoparticles/graphene-Loading Loofah Sponge Hybrid.

Nano-Ni/Cu decorated iron oxide for catalytic reduction of 4-nitrophenol

Facile Improvement of Nanoscale Zero-Valent Iron Activity with Exceptional Stability for Reduction of Cr(VI)

Preparation of Cu/montmorillonite-chitosan and its catalytic activity for p-nitrophenol reduction

Removal of P-Nitrophenol by Nano Zero Valent Iron-Cobalt and Activated Persulfate Supported onto Activated Carbon

Preparation and Characterization of Chitosan-Humic Acid-Zerovalent Iron Nanocomposite for Nitrate Reduction in Water

Catalytic Reduction of p-Nitrophenol on MnO2/Zeolite -13X Prepared with Lawsonia inermis Extract as a Stabilizing and Capping Agent

Zero-Valent Iron Nanoparticles With Sustained High Reductive Activity For Carbon Tetrachloride Dechlorination

Pt Nanoparticles Supported on Ultrathin Ni(OH)2 Nanosheets for Highly Efficient Reduction of 4-Nitrophenol

CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol

Graphitic carbon nitride modified by 5-sulfonic-8-hydroxyquinoline and Fe (III) ions as visible-light photocatalyst to efficiently reduce nitroaromatic compounds

PLA/CS-ZnO bionanocomposite for rapid catalytic reduction of nitrophenol compounds as a heterogeneous nanocatalyst

Enhanced Nitrobenzene Reduction by Zero Valent Iron Pretreated with H2O2/HCl

Ultrafine Silver Nanoparticles Supported On A Covalent Carbazole Framework As High-Efficiency Nanocatalysts For Nitrophenol Reduction

Improving Reductive Performance of Zero Valent Iron by H2O2/HCl Pretreatment: A Case Study on Nitrate Reduction

Cu-anchored CNTs for Effectively Catalytic Reduction of 4-Nitrophenol

Chitosan Modifying Nanoscale Zero Valent Iron for Tetracycline Removal from Aqueous Solutions: Proposed Pathway

Reduction of Nitrobenzene in Aqueous and Soil Phases Using Carboxymethyl Cellulose Stabilized Zero-Valent Iron Nanoparticles