Abstract:This paper proposes an architecture of the wireless monitoring system for the real-time monitoring of the orthopedic implants, which monitors the implant duty cycle, detects abnormal asymmetry, high amounts of force, and other conditions of the orthopedic implants. Data for diagnosis are communicated wirelessly by the radio-frequency (RF) signal between the embedded chip and the remote circuit. In different working modes, the system can be powered by the RF signal or stiff lead zirconate-titanate (PZT) ceramics which are able to convert mechanical energy inside the orthopedic implant into electrical energy. The power circuits with a variable ratio switched-capacitor (SC) dc-dc converter have been taped out with 0.35-mum complementary metal-oxide semiconductor (CMOS) technology. The test results show that the SC converter can transfer the input voltage that ranges from 5 V to 14 V from the PZT ceramics into the voltage ranging from 2 V to 2.5 V which will be dealt with by a low drop-out circuit in the future work. The total efficiency of the SC converter is from 28% to 42% at full-time working mode. The analog-to-digital converter (ADC) circuits have been fabricated in a 0.18-mum 1P6M CMOS process. The test results show that the ADC chip consumes only 12.5 muW in working mode and 150 nW in the sleep mode. The circuits, including RF circuits, ADC, and the microcontrol unit, have been implemented in a 0.18-mu m CMOS process. Future work includes some clinical experiments test in the application where PZT elements are used for power generation in total knee-replacement implants.

A 21.6μW inductively powered implantable IC for blood flow measurement

An Inductively Powered Implantable Blood Flow Sensor Microsystem for Vascular Grafts

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

A Novel Implantable Saw Sensor for Blood Pressure Monitoring

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

The RF Front-end of a Blood Flow Sensor for Vascular Graft Applications

A battery-less wireless implant for the continuous monitoring of vascular pressure, flow rate and temperature

A Batteryless Sensor ASIC for Implantable Bio-impedance Applications

A Resistive Sensor Interface IC with Inductively Coupled Wireless Energy Harvesting and Data Telemetry for Implantable Pressure Sensing.

Biodegradable and flexible arterial-pulse sensor for the wireless monitoring of blood flow

Low Voltage Low Power SAR ADC for Implantable Medical Chips

Wireless powered implantable bio-sensor tag system-on-chip for continuous glucose monitoring

A Current-Switching Communication Technique for Miniaturized Medical Implants

An Implantable Readout Circuit with On-Chip Reference Buffer for the Detection of Biological Electrical Signals Employing Artificial Intelligence Algorithms to Compensate and Calibrate

A generic miniature multi-feature programmable wireless powering headstage ASIC for implantable biomedical systems

A 27-Mbps, 0.08-mm3 CMOS Transceiver with Simultaneous Near-field Power Transmission and Data Telemetry for Implantable Systems

A 13.56-MHz −25-dBm-Sensitivity Inductive Power Receiver System-on-a-Chip With a Self-Adaptive Successive Approximation Resonance Compensation Front-End for Ultra-Low-Power Medical Implants

Low-power circuits for the bidirectional wireless monitoring system of the orthopedic implants

Implantable and Self-Powered Blood Pressure Monitoring Based on A Piezoelectric Thinfilm: Simulated, in Vitro and in Vivo Studies

A 4.5 μW Miniaturized 3-Channel Wireless Intra-Cardiac Acquisition System