Abstract:Improving battery longevity in portable devices usually requires the use of different voltage levels with a wide range of load capability for various functional blocks. Since a single-inductor-multiple-output (SIMO) converter can support multiple output voltages while using only one inductor, it is an excellent candidate to minimize the component count and thus the production cost. However, the cross-regulation and power consumption are two main issues of the previously reported SIMO converters [1-5]. Although pseudo-continuous conduction-mode (PCCM) control with a freewheel period [1] tries to augment power density and eliminate cross-regulation, associated power dissipation of freewheel switch exacerbates its overall efficiency. The charge-control technique with energy recovery presented [2] decouples the output channels between each switching cycle, at the expense of additional switching loss and slow response. The comparator-based controlled SIMO converters are investigated in [3, 4] and the cross-regulation in most channels is improved due to the fast response of the comparator. However, since the channel that is last connected to inductor is inevitably regulated by the accumulative error of all channels to balance the overall inductor current, every load transition at other outputs will introduce serious cross-regulation [3] and load-regulation problem [4] in the channel. In addition, cross-regulation and slow response also limit the application of dynamic voltage scaling (DVS) technique, which is widely used in single-output converters to improve the system power efficiency by providing variable voltage with fast reference tracking.

High-Efficient Hybrid Buck Converter with Switch-on-Demand Modulation and Switch Size Control for Wide-Load Low-Ripple Applications

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

PWM/PSM Dual-Mode Controller for High Efficiency DC-DC Buck Converter

High voltage PWM/PSM dual-mode asynchronous BUCK converter

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

A 1500ma, 10mhz On-Time Controlled Buck Converter with Ripple Compensation and Efficiency Optimization

A 1500 Ma, 10 Mhz On-Time Controlled Buck Converter with Ripple Compensation and Efficiency Optimization

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

A Monolithic High-Performance Buck Converter with Enhanced Current-Mode Control and Advanced Protection Circuits

A Design of High-power Buck Converter Based on Synchronous Rectification

A 88.3%-91.2% Efficient Buck DC-DC Converter in 0.5um CMOS

A High-Efficiency Double Step Down Converter with Dual-Mode Control and Seamless Mode Transition in A Wide Load Current Range

A Hysteretic Buck DC-DC Converter Achieving 90% Peak Efficiency with Light-Load Current of 0.1–10 Ma

A High Efficiency Hybrid Step-Up/Step-Down Dc-Dc Converter Using Digital Dither For Smooth Transition

4.3 an 87%-Peak-efficiency DVS-capable Single-Inductor 4-Output DC-DC Buck Converter with Ripple-Based Adaptive Off-Time Control.

A high efficiency current mode step-up/step-down DC-DC converter with smooth transition

A Simplified Implementation With Improved Dynamic Performance of PWM Plus Phase-Shift Control for Four-Switch Buck-Boost Converter

A Digital Dither Controlled Step-Up/step-down DC-DC Converter with Smooth Transition

A Low Noise High Efficiency Buck DC-DC Converter with Sigma—delta Modulation

A 2.5 MHz, 6 A Ripple-Based Adaptive On-Time Controlled Buck Converter with Pseudo Triangular Ramp Compensation

Buck Converter with Load Adaptive Losses and 256x sub-mW Load Transient Response Time of 0.8 ms using Synchronous Control