Mode and Propagation Effects of Optical Orbital Angular Momentum (OAM) Modes in a Ring Fiber

Yang Yue,Yan,Ahmed, N.,Jeng-Yuan Yang

DOI: https://doi.org/10.1364/ofc.2012.om2d.2

2012-01-01

Abstract:Single-ring fiber can support 10 OAM modes while maintaining radially sing-mode condition. The crosstalk between the modes is less than -20 dB even in a 1%-ellipticity fiber. OAM0,4 can propagate 500-km with <;10-ps mode walk-off.

What problem does this paper attempt to address?

Mode Properties and Propagation Effects of Optical Orbital Angular Momentum (OAM) Modes in a Ring Fiber

Yang Yue,Yan,Nisar Ahmed,Jeng-Yuan Yang,Lin Zhang,Yongxiong Ren,Hao Huang,Kevin M. Birnbaum,Baris I. Erkmen,Sam Dolinar,Moshe Tur,Alan E. Willner

DOI: https://doi.org/10.1109/jphot.2012.2192474

IF: 2.4

2012-01-01

IEEE Photonics Journal

Abstract:We simulate and analyze the mode properties and propagation effects of orbital angular momentum (OAM) modes in a ring fiber. A ring fiber with 0.05 up-doping is designed in simulation to support up to 10 OAM modes while maintaining single-mode condition radially. With a multiple-ring fiber, tens of OAM modes can be potentially multiplexed to greatly enhance the system capacity and spectral efficiency. The mode index difference can be maintained above 10-4 over hundreds of nanometers optical bandwidth. Higher order OAM modes' azimuthal intensity and odd-order OAM modes' azimuthal phase show better tolerance to the fiber ellipticity. Moreover, higher order OAM modes also have longer 2π and 10-ps walk-off length. After 600-km propagation, OAM0,4 mode shows <; 10-ps mode walk- off, even in a ring fiber with 1% ellipticity. Also, in such an elliptical fiber, the well-aligned OAM modes with different charges have <;-20 dB intermode crosstalk. The improvement of the circularity for the ring fiber is expected to reduce the crosstalk and increase the demultiplexing efficiency.
Improving orbital angular momentum mode transmission with imperfect ring-core fiber

Xiaohui Wang,Yongze Yu,Dongdong Deng,Shuai Mao,Yang Wang,Haoyu Gu,Yingxiong Song,Fufei Pang,Liyun Zhuang,Song Yang,Xiaofeng He,Chao Wang,Tiezhu Zhu,Yudong Yang

DOI: https://doi.org/10.1088/2040-8986/ad2a26

IF: 2.1

2024-02-18

Journal of Optics

Abstract:Orbital Angular Momentum (OAM), inherent to light beams characterized by helical phase fronts, represents an alternative spatial degree of freedom for photons. In recent years, OAM-based communication has gained significant attention as a potential solution to increase the capacity and spectral efficiency of optical fiber communication systems. In optical fibers, OAM modes can be generated and manipulated by utilizing specialized optical components and techniques. One approach involves using specially designed optical fibers, such as ring-core fibers, which have the capability to support multiple OAM modes. In the manufacturing process, the ring fiber is hardly made perfectly, especially the doped-cores. The introduced defect breaks the symmetry of the ring-core, which has a serious impact on OAM mode transmission. Using a material with a slightly higher refractive index than the cladding to wrap the ring-core is effective in reducing impairment of defects. After numerical simulation, the proposed method improves the walk-off length by a factor of 2-40.

optics
Efficient Generation And Multiplexing Of Optical Orbital Angular Momentum Modes In A Ring Fiber By Using Multiple Coherent Inputs

Yan Yan,Yang Yue,Hao Huang,Jeng-Yuan Yang,Mohammad R. Chitgarha,Nisar Ahmed,Moshe Tur,Samuel. J. Dolinar,Alan E. Willner

DOI: https://doi.org/10.1364/OL.37.003645

IF: 3.6

2012-01-01

Optics Letters

Abstract:We propose an approach to efficiently generate and multiplex optical orbital angular momentum (OAM) modes in a fiber with a ring refractive index profile by using multiple coherent inputs from a Gaussian mode. By controlling the phase relationship of the multiple inputs, one can selectively generate OAM modes of different states l. By controlling both the amplitude and phase of the multiple inputs, multiple OAM modes can be generated simultaneously without additional loss coming from multiplexing. We show, by simulation, the generation of OAM modes (OAM state [l] < 3) with mode purity greater than 99%. The power loss of generating and multiplexing seven modes is about 35%. A transmitter for an OAM-based mode-division multiplexing system is proposed based on the discrete Fourier transform between the data carried by the multiple inputs and the data carried by the OAM modes. The experimental implementation of the proposed approach could be achieved by integrating ring fiber, multicore fiber, and photonic integrated circuit technology. (c) 2012 Optical Society of America
19-Ring-air-core Fiber Supporting Thousands of OAM Modes for Spatial Division Multiplexing

Yingning Wang,Wenqian Zhao,Jiahe Hu,Zhi Wang,Yan-Ge Liu,Changjing Bao,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1364/ol.453079

IF: 3.6

2022-01-01

Optics Letters

Abstract:We propose and design a 19-ring-air-core fiber that can support about 3000 orbital angular momentum (OAM) modes (156 modes in each ring) with <-80 dB inter-ring cross talk across the entire C and L bands after 100-km fiber propagation. Moreover, the eigenmodes are all separated from their adjacent modes by effective index differences >2.67 × 10-4 and mode groups by > 1.90 × 10-2, which can guarantee the stable transmission of OAM modes. This designed fiber is a potential candidate for applications in spatial division multiplexing (SDM) of optical channels to improve the capacity of next-generation high-speed optical communication systems, especially in short-distance applications. In this Letter, we also show the relationship between supported OAM mode numbers, total cross talk, and effective refractive index of intra-ring modes during the optimization of fiber through numerical simulations. It can provide a related reference for the future design of multi-ring-core fibers.
Highly Dispersive Optical Fiber for Orbital Angular Momentum Modes

Wenpu Geng,Changjing Bao,Lin Zhang,Yuxi Fang,Yingning Wang,Zhi Wang,Weiwei Liu,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/jlt.2022.3219833

2022-01-01

Advanced Photonics Research

Abstract:Orbital angular momentum (OAM) modes, featured by the unique properties of the helical phase front and annular intensity profile, have shown enormous potential for a wide range of applications. Optical fibers with ring-shape profile have been experimentally proven for supporting stable OAM beam propagation. In most instances, managing the chromatic dispersion is of vital importance in a variety of optical fiber systems. In this paper, we summarize optical fibers with concentric ring cores for extremely dispersive OAM modes. The properties of the OAM mode in double ring-core fiber are presented, including the effective refractive index, effective mode area, power integral ratio, chromatic dispersion, and loss. Photonic crystal fiber and triple ring-core fiber, which share the same operation principle for dispersive OAM modes as the one in the dual-ring fiber, are also briefly introduced.
7-Ring-air-core Trench-Assisted Fibre Supporting >300 Radially Fundamental OAM Modes Across S+C+L Bands

Yingning Wang,Kunbi Zhu,Yuxi Fang,Wenpu Geng,Wenqian Zhao,Changjing Bao,Yan-ge Liu,Weigang Zhang,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/cleo/europe-eqec52157.2021.9542003

2021-01-01

Abstract:Recently, high-speed optical communication systems have achieved fundamental capacity limitation by using time-, wavelength-, and polarization-division multiplexing technologies. As a recently explored property of light, mode division multiplexing (MDM) and space division multiplexing (SDM) have great potential to break the capacity limitation for the next-generation communication systems. Orbital angular momentum (OAM) beam is one kind of structured light with a "doughnut" intensity distribution and theorectically infinite topological charge [1] – [3] . Advanced multiplexing technique of combining MDM technology based on OAM modes with SDM in the multicore fibres (MCF) can be utilized to further improve the data-transmission rate and spectral efficiency. In this work, we propose and design a multi-ring-air-core trench-assisted fibre with 7 rings each supporting 58 OAM modes (i.e. 406 ones in total) at 1550 nm. Moreover, the improvement of the introduced low-index trench region on the communication system’s performance is numerically analyzed for the OAM 1,1 mode, and the results show that -77.37 dB low-level crosstalk can be achieved after 100-km fibre propagation.
Trench-assisted multi-ring-core fiber for orbital angular momentum modes

Haoyang Ren,Yingning Wang,Wenpu Geng,Wenqian Zhao,Runzhou Zhang,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1016/j.rinp.2023.106800

IF: 4.565

2023-01-01

Results in Physics

Abstract:Orbital angular momentum (OAM) multiplexing technology has attracted significant interest due to its ability to increase the data transmission capacity in optical communications. By combining OAM-based mode division multiplexing (MDM) and wavelength division multiplexing (WDM) techniques in multi-core fiber (MCF), the transmission rate and spectral efficiency of the optical communication systems can be greatly enhanced. In this paper, we present a design of a multi-ring air-core trench-assisted fiber that supports transmission over the entire C + L (1530–1625 nm) band with low inter-ring crosstalk. The high-contrast ring and trench design can effectively suppress the inter-modal crosstalk. The effects of the ring spacing, wavelength range and doping concentration on the crosstalk suppression are also systematically investigated. Furthermore, the complexity of the MIMO processing system is greatly reduced with a fewer-optical-core structure while keeping low inter-ring crosstalk. The results demonstrate that our designed fiber can support 140 OAM modes at 1550 nm with < −79.4 dB inter-ring crosstalk at low Ge-doped concentration (12.5 mol%), and it can keep the inter-ring crosstalk below −66.56 dB across the C + L band, which features lower inter-ring crosstalk than the other reports while supporting more OAM modes. Furthermore, to support more OAM modes with lower inter-ring crosstalk and intra-modal crosstalk, we further provide a second low-doping-concentration (12.5 mol%) fiber design, which can support 196 OAM modes with < −35.74 dB inter-ring crosstalk and Δneff > 5.39 × 10−4. Additionally, our designed fiber can support 224 OAM modes (37.5 mol% Ge-doped) and < −63 dB inter-ring crosstalk with low intra-modal crosstalk (Δneff > 5.45 × 10−4) and flat dispersion distribution (chromatic dispersion slope lower than 0.171 ps/nm2/km) across the C + L band.
Propagation Characteristics of Orbital Angular Momentum Modes at 810 Nm in Step-Index Few-Mode Fibers

Zhouxiang Wang,Yuchen Xie,Shuangyin Huang,Han Zhou,Rui Liu,Zhifeng Liu,Min Wang,Wenrong Qi,Qianqian Tian,Lingjun Kong,Chenghou Tu,Yongnan Li,Huitian Wang

DOI: https://doi.org/10.3788/col201917.120601

IF: 2.56

2019-01-01

Chinese Optics Letters

Abstract:In free-space or in optical fibers,orbital angular momentum (OAM) multiplexing for information transmission has been greatly developed.The light sources used were well coherent communication bands,and the fibers used were customized.Here,we use an 810 nm femtosecond laser to generate optical vortices carrying OAM and then feed them into two kinds of commercial step-index few-mode fibers to explore the transmission characteristics of OAM modes.We also propose a method without multiple-input multiple-output digital signal processing to identify the input OAMs.It is of great guiding significance for high-dimensional quantum information experiments via the OAMs as a degree of freedom,using the light generated by the spontaneous parametric down-conversion as the source and the commercial fibers for information transmission.
Ring-core Fiber Supporting OAM-based Optical Communications

Yang Yue,Yuanpeng Liu,Wenqian Zhao,Jian Yang,Wenpu Geng,Yingning Wang

DOI: https://doi.org/10.1109/OECC56963.2023.10209937

2023-01-01

Abstract:Several types of ring-core optical fibers are presented for OAM modes, including multi ring-core fiber supporting thousands of modes, coupled ring-core fiber with large dispersion, and non-zero dispersion-shifted ring-core fiber to balance dispersion and nonlinearity.
Orbital Angular Momentum Mode Groups Multiplexing Transmission over 2.6-Km Conventional Multi-Mode Fiber.

Long Zhu,Andong Wang,Shi Chen,Jun Liu,Qi Mo,Cheng Du,Jian Wang

DOI: https://doi.org/10.1364/oe.25.025637

IF: 3.8

2017-01-01

Optics Express

Abstract:Twisted light carrying orbital angular momentum (OAM) is a special kind of structured light that has a helical phase front, a phase singularity, and a doughnut intensity profile. Beyond widespread developments in manipulation, microscopy, metrology, astronomy, nonlinear and quantum optics, OAM-carrying twisted light has seen emerging application of optical communications in free space and specially designed fibers. Instead of specialty fibers, here we show the direct use of a conventional graded-index multi-mode fiber (MMF) for OAM communications. By exploiting fiber-compatible mode exciting and filtering elements, we excite the first four OAM mode groups in an MMF. We demonstrate 2.6-km MMF transmission using four data-carrying OAM mode groups (OAM0,1, OAM+1,1/OAM-1,1, OAM+2,1, OAM+3,1). Moreover, we demonstrate two data-carrying OAM mode groups multiplexing transmission over the 2.6-km MMF with low-level crosstalk free of multiple-input multiple-output digital signal processing (MIMO-DSP). The demonstrations may open up new perspectives to fiber-based OAM communication/non-communication applications using already existing conventional fibers.
Multi-Orbital-Angular-Momentum Multi-Ring Fiber for High-Density Space-Division Multiplexing

Shuhui Li,Jian Wang

DOI: https://doi.org/10.1109/JPHOT.2013.2272778

2013-01-01

Abstract:A compact low-crosstalk multi-ring fiber transmitting multiple orbital angular momentum (OAM) modes is presented. The multi-OAM-mode multi-ring fiber (MOMRF) consists of 7 rings, each supporting 22 modes with 18 OAM ones (i.e., 154 channels in total), which can be used for high-density space-division multiplexing. The employed high-contrast-index ring structure benefits tight light confinement and large effective refractive index difference of different OAM modes , featuring both low-level inter-ring crosstalk ( 30 dB for a 100-km-long fiber) and intermode crosstalk over a wide wavelength range (1520-1580 nm). The designed MOMRF is also compatible with wavelength-division multiplexing technique (e.g., 75 ITU-grid wavelengths from 1520.25 to 1579.52 nm with 100-GHz spacing) and advanced multilevel amplitude/phase modulation formats (e.g., 16-ary quadrature amplitude modulation), which might be used to achieve petabit-per-second total transmission capacity and hundred bits-per-second-per-hertz aggregate spectral efficiency.
Multi-Ring-Air-Core Fiber Supporting Numerous Radially Fundamental OAM Modes

Yingning Wang,Yuanpeng Liu,Wenqian Zhao,Jian Yang,Wenpu Geng,Yuxi Fang,Changjing Bao,Yongxiong Ren,Zhi Wang,Yan-ge Liu,Zhongqi Pan,Yang Yue,Yange Liu

DOI: https://doi.org/10.1109/jlt.2022.3162852

IF: 4.7

2022-01-01

Journal of Lightwave Technology

Abstract:Orbital angular momentum (OAM) multiplexing technology is expected as one of the prospective candidates for sustaining the further increment of data-transmission capacity in the optical communication systems. Advanced multiplexing technology of combining OAM-based mode division multiplexing (MDM) in the multicore fiber (MCF) with wavelength division multiplexing (WDM) can further improve the transmission rate and spectrum efficiency in the communication systems. In this paper, a multi-ring-air-core fiber (MRACF) supporting thousands of OAM modes is designed and analyzed. The tradeoffs between ring numberdensity and their corresponding system performance parameters in this fiber are systematically investigated. Based on the analytical results, MRACF with 37 rings can support a record high 4440 radially fundamental OAM modes at 1550 nm, featuring <53 dB inter-ring crosstalk and >5.67 104 intra-ring modal effective refractive index difference. Furthermore, a record-high 4144 radially fundamental OAM modes with <40 dB inter-ring crosstalk can be supported across C and L bands from 1530 nm to 1625 nm, which is one order of magnitude larger than the number of linearly polarized (LP) modes or supermodes ever reported within one single fiber.

engineering, electrical & electronic,optics,telecommunications
A Multi-Ring Multi-Oam-Mode Fiber For High-Density Space-Division Multiplexing (7 Rings X 22 Oam Modes)

Shuhui Li,Jian Wang

DOI: https://doi.org/10.1109/IPCon.2013.6656556

2013-01-01

Abstract:We present a compact multi-ring fiber transmitting multiple orbital angular momentum (OAM) modes. The designed multi-ring multi-OAM-mode fiber (MRMOF) consists of 7 rings each supporting 22 OAM modes, i.e. 154 channels in total.
Dispersion Compensating Ring Fibre in the C-Band for OAM Mode

Wenqian Zhao,Xu Han,Wenpu Geng,Yingning Wang,Yuxi Fang,Changjing Bao,Zhi Wang,Yan-Ge Liu,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/cleo/europe-eqec52157.2021.9542709

2021-01-01

Abstract:Orbital angular momentum (OAM) modes have gained a lot of interest as being a potential technology to further improve the speed of data transmission in the fibre-based optical communication systems. As a complete set of orthogonal basis functions for spatial distribution of electromagnetic field, the number of OAM modes can be theoretically limitless. Consequently, OAM beams can be implemented for building optical communication channels to feature better spectral efficiency and higher data-carrying capacity [1] , [2] . In our previous work, we have proposed and designed a non-zero dispersion-shifted ring fibres (NZDSRF) for the transmission of OAM mode [3] . A positive dispersion of 3.3 ps/(nm·km) has been obtained at wavelength of 1550 nm for OAM 1,1 mode, with a dispersion slope of 0.0829 ps/(nm 2 ·km) from 1530 to 1565 nm. In order to build an effective optical fibre transmission link using the wavelength division multiplexing (WDM) technology, a laudable goal would be to have the corresponding dispersion compensating fibre for OAM mode in the C-band.
Air-Core Ring Fiber with >1000 Radially Fundamental OAM Modes Across O, E, S, C, and L Bands.

Yingning Wang,Changjing Bao,Wenpu Geng,Yao Lu,Yuxi Fang,Baiwei Mao,Yan-Ge Liu,Bo Liu,Hao Huang,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/access.2020.2985776

IF: 3.9

2020-01-01

IEEE Access

Abstract:In this work, an air-core ring fiber is designed with a record high 1322 orbital angular momentum (OAM) modes at 1550 nm while maintaining radially single-mode condition. Moreover, it can support over 1004 OAM modes across all O, E, S, C, and L bands, exploiting to our knowledge the highest number of OAM modes ever supported in the optical fiber within a wide wavelength range. Simulations show that, across the C and L bands, the fiber with 55- $\mu \text{m}$ air-core radius and 0.45- $\mu \text{m}$ ring width can preserve $3.3\times 10 ^{-3}$ effective refraction index difference between the two highest-order OAM modes $HE_{340,1}$ and $EH_{271,1}$ . This enables efficient mode separation, and thus achieving stable OAM modes transmission. The effective refractive index differences between the even and odd fiber eigenmodes are also analyzed in the elliptical and bent fibers. We note that higher-order OAM modes are more tolerant to the fiber ellipticity and bending. This ring fiber design has the potential to increase the spectral efficiency and the overall capacity in fiber-based communications system.
A Compact Trench-Assisted Multi-Orbital-Angular-Momentum Multi-Ring Fiber for Ultrahigh-Density Space-Division Multiplexing (19 Rings × 22 Modes)

Shuhui Li,Jian Wang

DOI: https://doi.org/10.1038/srep03853

IF: 4.6

2014-01-01

Scientific Reports

Abstract:We present a compact (130 μm cladding diameter) trench-assisted multi-orbital-angular-momentum (OAM) multi-ring fiber with 19 rings each supporting 22 modes with 18 OAM ones. Using the high-contrast-index ring and trench designs, the trench-assisted multi-OAM multi-ring fiber (TA-MOMRF) features both low-level inter-mode crosstalk and inter-ring crosstalk within a wide wavelength range (1520 to 1630 nm), which can potentially enable Pbit/s total transmission capacity and hundreds bit/s/Hz spectral efficiency in a single TA-MOMRF. Moreover, the effective refractive index difference of even and odd fiber eigenmodes induced by the ellipticity of ring and fiber bending and their impacts on the purity of OAM mode and mode coupling/crosstalk are analyzed. It is found that high-order OAM modes show preferable tolerance to the ring ellipticity and fiber bending. The designed fiber offers favorable tolerance to both small ellipticity of ring (<−22 dB crosstalk under an ellipticity of 0.5%) and small bend radius (<−20 dB crosstalk under a bend radius of 2 cm).
Non-zero Dispersion-Shifted Ring Fiber for the Orbital Angular Momentum Mode.

Wenqian Zhao,Yingning Wang,Si-ao Li,Wenpu Geng,Changjing Bao,Yuxi Fang,Zhi Wang,Yan-ge Liu,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1364/oe.424886

IF: 3.8

2021-01-01

Optics Express

Abstract:As the dimension of orbital angular momentum (OAM) is orthogonal to the other degrees of freedom for photon, such as wavelength, it can be utilized to further increase data capacity in the wavelength division multiplexing (WDM) systems. However, the non-zero dispersion-shifted fiber (NZDSF) for the OAM mode has not yet been investigated or even proposed. In this work, we propose and design a ring fiber with low chromatic dispersion for the HE2,1 mode, which can serve as NZDSF for its corresponding OAM1,1 mode. A low dispersion of 3.3 ps/(nm·km) at 1550 nm and <2.9 ps/(nm·km) dispersion variation from 1530 to 1565 nm for the OAM1,1 mode is achieved in simulation, which satisfies the standard of the ITU-T G.655.C. The designed fiber with ring width from 1.5 µm to 3.5 µm can support the OAM1,1 mode within the C-band, and a large effective area of about 646 µm2 is obtained. We also note that the fiber with larger inner radius and ring width are more tolerant to the perturbations, such as fiber ellipticity and bending. In the fiber-based optical communication systems, the designed ring fiber could be used as a candidate for supporting OAM modes with low dispersion and reduced nonlinear effects.
Non-Zero Dispersion-Shifted Ring-Core Fiber Supporting 60 OAM Modes

Wenqian Zhao,Yuanpeng Liu,Yingning Wang,Wenpu Geng,Yuxi Fang,Runzhou Zhang,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/jlt.2023.3236766

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:Orbital angular momentum (OAM) modes have becoming more promising to further achieve higher spectral efficiency and data capacity in space-division-multiplexing (SDM) fiber communication systems. In this work, we design and optimize a graded-index non-zero dispersion-shifted ring-core fiber (GI-NZDSRF) to support OAM modes in fiber-based transmission system. A record high number of 60 OAM modes in the C band with <10 ps/nm/km chromatic dispersion (CD) is obtained. A low differential mode delay (DMD) (<5.11 ps/m) and a large effective mode area (>1418 μm2) of OAM modes are achieved by the designed fiber. Furthermore, the effects of fiber parameters on OAM modes are also investigated, including the index shape, doping concentration, central location, and half width of the high index region.
Broadband Dispersion Compensating Ring-Core Fiber for Orbital Angular Momentum Modes.

Wenqian Zhao,Xu Han,Wenpu Geng,Yingning Wang,Yuxi Fang,Changjing Bao,Zhi Wang,Yan-Ge Liu,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1364/oe.470553

IF: 3.8

2022-01-01

Optics Express

Abstract:A well designed ring-core fiber can theoretically support numerous orbital angular momentum (OAM) modes with low crosstalk for space-division-multiplexing (SDM) data transmission, which is considered as a promising solution for overcoming the capacity crunch in optical communication network. However, the accumulated chromatic dispersion in OAM-fiber could limit the data speed and transmission distance of communication systems. A potential solution is to insert a dispersion compensation ring-core fiber with opposite-sign of dispersion in the transmission fiber along the fiber link. In this work, we propose a triple ring-core fiber with broadband negative dispersion. A highest negative dispersion of -24.47 ps/(nm·km) at 1550 nm and an average dispersion slope in the C band from -0.182 ps/(nm2·km) to 0.065 ps/(nm2·km) can be achieved to compensate multi-order dispersion. The effects of Ge-doping concentration fluctuation in the high-index ring core and fabrication errors on fiber geometric structures are also investigated. Furthermore, the effective mode area decreases as the widths of high-index rings increase due to the enhanced confinement ability. The designed triple ring-core fiber could offer potential for compensating OAM fiber links with positive dispersions.
Orbital angular momentum communications based on standard multi-mode fiber (invited paper)

Jian Wang,Shi Chen,Jun Liu

DOI: https://doi.org/10.1063/5.0049022

IF: 5.6

2021-06-01

APL Photonics

Abstract:Orbital angular momentum (OAM) modes, having unique properties of a helical phase structure and doughnut intensity profile, have been widely studied in fiber-optic communications, in terms of OAM modulation and OAM multiplexing. In general, different types of specialty fibers with a ring-shape structure are preferred for more stable OAM transmission, which, however, may face greater manufacturing challenge and larger fiber loss compared to standard multi-mode fibers (MMFs). Therefore, the widely deployed and commercially available standard MMFs that can support hundreds of OAM modes have recently attracted great attention. In this paper, we review recent research progress in OAM communications based on standard MMFs. First, the basic concept of OAM and different types of specially designed OAM fibers are briefly introduced. Then, the OAM mode properties in MMFs and recent works, including OAM mode modulation, multiple-input multiple-output (MIMO)-free OAM mode group multiplexing, small-scale partial MIMO assisted OAM mode multiplexing, and OAM-based heterogeneous fiber-optic networks, are presented. The OAM communications using other widely deployed standard single-mode fibers are also briefly introduced as supplementary. Finally, key challenges and perspectives of OAM communications based on standard MMF are discussed and summarized.

optics,physics, applied

Mode and Propagation Effects of Optical Orbital Angular Momentum (OAM) Modes in a Ring Fiber

Mode Properties and Propagation Effects of Optical Orbital Angular Momentum (OAM) Modes in a Ring Fiber

Improving orbital angular momentum mode transmission with imperfect ring-core fiber

Efficient Generation And Multiplexing Of Optical Orbital Angular Momentum Modes In A Ring Fiber By Using Multiple Coherent Inputs

19-Ring-air-core Fiber Supporting Thousands of OAM Modes for Spatial Division Multiplexing

Highly Dispersive Optical Fiber for Orbital Angular Momentum Modes

7-Ring-air-core Trench-Assisted Fibre Supporting >300 Radially Fundamental OAM Modes Across S+C+L Bands

Trench-assisted multi-ring-core fiber for orbital angular momentum modes

Propagation Characteristics of Orbital Angular Momentum Modes at 810 Nm in Step-Index Few-Mode Fibers

Ring-core Fiber Supporting OAM-based Optical Communications

Orbital Angular Momentum Mode Groups Multiplexing Transmission over 2.6-Km Conventional Multi-Mode Fiber.

Multi-Orbital-Angular-Momentum Multi-Ring Fiber for High-Density Space-Division Multiplexing

Multi-Ring-Air-Core Fiber Supporting Numerous Radially Fundamental OAM Modes

A Multi-Ring Multi-Oam-Mode Fiber For High-Density Space-Division Multiplexing (7 Rings X 22 Oam Modes)

Dispersion Compensating Ring Fibre in the C-Band for OAM Mode

Air-Core Ring Fiber with >1000 Radially Fundamental OAM Modes Across O, E, S, C, and L Bands.

A Compact Trench-Assisted Multi-Orbital-Angular-Momentum Multi-Ring Fiber for Ultrahigh-Density Space-Division Multiplexing (19 Rings × 22 Modes)

Non-zero Dispersion-Shifted Ring Fiber for the Orbital Angular Momentum Mode.

Non-Zero Dispersion-Shifted Ring-Core Fiber Supporting 60 OAM Modes

Broadband Dispersion Compensating Ring-Core Fiber for Orbital Angular Momentum Modes.

Orbital angular momentum communications based on standard multi-mode fiber (invited paper)