Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

A Novel Class of Multipulse Converters Based on High-Frequency-operated Transformers

Transmission Line Transformers for Up to 100 Kw Pulsed Power Generation

Modeling and Analysis of Multi-Pulse Converters Based on High-Frequency-Operated Transformer

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A Novel Circuit Topology for Pulsed Power Generation

Novel Multiple-switch Pulsed Power Technologies

A multiplicator ZCS turn on boost converter with high-efficiency and high-voltage-gain

A High Frequency Multiphase Modular Hybrid Transformerless DC/DC Converter for High-Voltage-Gain High-Current Applications

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

A Novel Load Converter with a Controllable Transformer for High Frequency AC Distributed Power System

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

Modular Multilevel Power Electronic Transformer

Topology and Control Method of a Novel Multi-level Converter with Multi-winding High-Frequency Transformer

1 MHz 48–12 V Regulated DCX with Single Transformer

Three Phase PFC Converter with Multilevel Inductive Switching Network

A Novel Shunt Zigzag Double-Tap Low-Harmonic Multi-Pulse Rectifier Based on a Three-Stage Power Electronic Phase-Shifting Transformer

Power Electronic Transformer Using Multi-Pulse Rectification Technique

A comprehensive circuit and modulation design of mixed frequency conversion cascaded power electronic transformer