Abstract:The failure issue of electromagnetic railgun rails is a widely researched problem, but effective research methods are lacking in studying the microstructure of rail materials. The high current and high strain rate tensile (HCHST) testing platform was designed to simulate the high current density and high strain rate deformation service conditions of pure copper rails used in electromagnetic guns. The microstructural and mechanical properties of commercially pure copper were analyzed using TEM and EBSD under high current density (2680 A/mm 2 ) and various high strain rates ( ε̇=3404s−1 , ε̇=6808s−1 )using the HCHST test platform. The obtained results were then compared with those obtained from the as-received state and the quasi-static current-assisted tensile (QCAT) test. The findings indicate that the deformation mechanism of pure copper specimen under HCHST is similar to that of QCAT, where dislocation and slip are the main mechanisms. However, distinct differences in microstructure were observed. Specifically, a significant number of dislocation walls were present in the grains under QCAT, whereas numerous dislocation cells were formed in the grains under HCHST. In the high-current density environment of 2680 A/mm 2 , as the strain rate increased, the number of dislocation cells increased while their size decreased. The grains became extremely refined, and the KAM value also increased. Furthermore, the Vickers hardness of pure copper significantly improved after undergoing the HCHST. Based on the experimental findings, it was observed that during the service process of the pure copper rail in electromagnetic railguns (under the influence of high current density and high strain rate deformation), the surface of the rail material experienced significant dislocation entanglement. This resulted in a significant increase in the strength and hardness of the surface of the rail with high strain rate deformation. However, the uneven distribution of strength and hardness throughout the surface layer of the rail eventually made it more susceptible to deformation and failure.

Influence of rail resistivity and rail height on armature edge erosion at current ramp-up

Electromechanical Performance of Rails With Different Cross-Sectional Shapes in Railgun

Investigation on the microstructure evolution and mechanical properties of electromagnetic rail material in a launch environment

Research progress on advanced rail materials for electromagnetic railgun technology

Characteristics of Current Distribution in Rails and Armature with Different Section Shape Rails

Factors Influencing the Expansion of Arch-Shaped Electromagnetic Railguns with Pre-Stressed Composite Barrels

Analysis of sliding electric contact characteristics in augmented railgun based on the combination of contact resistance and sliding friction coefficient

3D numerical research of railgun gouging mechanism based on material point method

Finite Element-Boundary Element Method Based Simulations of Electromagnetic Railgun in Augmented Configurations

Dynamic response of electromagnetic railgun under time-dependent electromagnetic moving loads

Investigation of Current-Carrying Oblique Impacts on the Copper–Aluminum Interface for Damage Characteristics

Analysis of parameter sensitivity of electromagnetic railgun system

Tradeoff between Efficiency and Melting for a High-Performance Electromagnetic Rail Gun

Research Progress on Surface Damage and Protection Strategies of Armature–Rail Friction Pair Materials for Electromagnetic Rail Launch

Researches on the System Launch Efficiency and the Armature Muzzle Kinetic Energy of a Constructed Electromagnetic Railgun

Effect of driving current profile on acceleration efficiency of electromagnetic railgun

Dynamic Analysis of Integrated Launch Package in the Barrel of Railgun

Increasing Launch Efficiency with the PEGASUS Launcher

Effect of Nickel–Phosphorus and Nickel–Molybdenum Coatings on Electrical Ablation of Small Electromagnetic Rails

Finite Element Analysis of Current Density Distribution in the Sliding Contact Interface of Electromagnetic Railguns: A Literature Review

Research on the Damage Diagnosis for Rails with a New 3D Scanning Method