Abstract:Image 1 Microchips are intensively used in almost all nowadays electronic devices. With the continuous advancement of our technologies, they get smaller in size than ever before. They generate high-intensity heat loads that need to be transported effectively such that they may function properly. Heat pipes have proven to be very effective in transporting relatively large heat loads from miniature components. They are of seamless structure that involves a working fluid capable of evaporation and condensation at the working temperature of the electronic chips. The working fluid is derived to move from the condenser to the evaporator via multiple microgrooves using capillary forces. It is important that the condensate reaches the evaporator at a proper rate such that no dry-out or flooding occur. In this work, we are particularly interested in the case of capillary-driven flows in rectangular microchannels. A generalized model is developed that works for axe-symmetric rectangular channels of arbitrary, moderately varying width profiles. It also accounts for any contrast of viscosity between the liquid and the vapor under isothermal conditions. The model shows to reduce to the special case of imbibition in straight and uniform microchannels, for which comparisons with experimental and modeling works show an excellent match. Cases representing linearly and quadratically varying converging/diverging width profiles have been explored. It is found that the viscosity ratio has a significant influence on the rate at which the meniscus advances. The model also negates the common practice found in the literature of using the formula developed for imbibition rates in capillary tubes for rectangular microchannels by replacing the diameter of the tube with the hydraulic diameter. It is also found that the channel profile has an influential effect on the imbibition rates. For tapered microchannels, the capillary force increases along the channel length while it decreases for diverging ones. It is interestingly demonstrated that, for quadratically tapered microchannel, the speed of the meniscus increases towards the end of the microchannel compared with linearly varying microchannels. On the other hand, for diverging microchannels, the speed of the meniscus decreases due to the increase in the cross-sectional area. Computational fluid dynamics (CFD) analysis has been conducted to provide a framework for confirmation and verification for which very good match has been established, which builds confidence in the modeling approach.

A Study to the Blood Flow Model in the Micro-Channels Based on the Video and Image Processing Technology

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

3d Reconstruction Of Slug Flow In Mini-Channels With A Simple And Low-Cost Optical Sensor

Characteristics Of Blood Flow In Microchannels And Relevant Impact On Modelling Blood Behaviour In Biochip Separators

Flow Characteristics of Blood Cells in Silicon Microchannel

The Transport And Deformation Of Blood Cells In Micro-Channel

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Whole flow field digital particle image velocimetry technology for microfluidic device

Study On Characteristics Of Interface Between Multiple Laminar Streams And Application For Secondary Etching Inside Microchannels

Experimental Study on the Viscoelastic Flow Mixing in Microfluidics

A microfluidic system for precisely reproducing physiological blood pressure and wall shear stress to endothelial cells

Manual and Automatic Image Analysis Segmentation Methods for Blood Flow Studies in Microchannels

A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile: Application to heat pipes

Integrated 3d Multi-Physical Simulation of A Microfluidic System Using Finite Element Analysis

Flow Modeling and Experimental Verification of Flow Resistors Used in Microfluidic Chips Driven by Capillary Force

Modeling of three-dimensional blood flow in microchannels using a two-fluid method

Design and Testing of Micro Fluidic Chemical Analysis Chip Integrated with Micro Valveless Pump

Visual Experiment and Analysis of Erythrocyte High-Speed Collision in Microchannel

SIMULATION AND MEASUREMENT OF FLOW FIELD IN MICROCHIP

Structural Design of Microfluidic Channels for Blood Plasma Separation

Numerical Analysis of Blood Flow Through Stenosed Microvessels Using a Multi-Phase Model