Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A Dual-Mode Dual-Band Ring Resonator Bandpass Filter with Controllable In-Between Isolation

A Dual-Band Bandpass Filter Using a Single Dual-Mode Ring Resonator

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual-Band Bandpass Filter With Good Selectivity And Stopband Rejection

A Dual-Band Ring-Resonator Bandpass Filter Based on Two Pairs of Degenerate Modes

Novel Design of Microstrip Bandpass Filters with a Controllable Dual-Passband Response: Description and Implementation.

New studies on microstrip ring resonators for compact dual-mode dual- and triple-band bandpass filters

Dual Mode Bandpass Filter with Switchable Response

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

Dual-mode dual-band bandpass filter design using open-loop resonators

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

The Design of Dual-Band Bandpass Filter Based-on Dual-Mode Open-Loop Resonator

Dual-band Dual-Ring Bandpass Filter with Large Bandwidth Ratio

Wideband Microstrip Ring Resonator Bandpass Filters under Multiple Resonances

Microstrip Multi-Band Bandpass Filters Using a Single Improved Ring Resonator

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Dual‐mode Dual‐band Bandpass Filter with Inside–outside–reversed Dual‐ring Topology

Dual-Band Bandpass Filter with Multiple Controllable Transmission Zeroes and Wide Stopband

Planar dual- and tri-band bandpass filters using single improved ring resonator and simple feed scheme