Abstract:This work involves the synthesis of hybrid oligomers based on the epoxy methacrylate resin. The EA resin was obtained by the modification of industrial-grade bisphenol A-based epoxy resin and methacrylic acid has been synthesized in order to develop multifunctional resins comprising both epoxide group and reactive, terminal unsaturation. Owing to the presence of both epoxy and double carbon–carbon pendant groups, the reaction product exhibits photocrosslinking via two distinct mechanisms: (i) cationic ring-opening polymerization and (ii) free radical polymerization. Monitoring of EA synthesis reactions over time using PAVs, MAAC and NV parameters, and the FT-IR method reveals that esterification reactions proceed faster at the start, exhibiting over 40% of conversion within the initial 60 min, which can be associated with a relatively high concentration of reactive sites and low viscosity of the reaction mixture at the initial reaction stage. With the further increase in the reaction time, the reaction rate tends to decrease. The control of the EA synthesis process can guide how to adjust reactions to obtain EAs with desired characteristics. Based on obtained values, one can state that the optimum synthesis time of about 4–5 h should be adopted to prepare EAs having both epoxy groups and unsaturated double bonds. The structure of the obtained EA was confirmed by FT-IR and NMR methods, as well as the determination of partial acid value and epoxy equivalent. Samples at various stages of synthesis were cured with UV radiation in order to study the kinetics of the process according to cationic and radical polymerization determined via photo-differential scanning calorimetry (photo-DSC) and real-time infrared spectroscopy (RT-IR) and then the properties of the cured coatings were tested. It turned out that the cationic polymerization was slower with a lower conversion of the photoreactive groups, as compared to the radical polymerization. All the obtained EA coatings were characterized by good properties of cured coatings and can be successfully used in the coating-forming sector.

Synthesis and Crosslinking Mechanism of a Polyacrylate/polyurethane Composite Coating

Synthesis, Crosslinking Mechanism And Properties Of A Polyacrylate/Polyurethane Composite Coating

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Synthesis and Study of Novel UV-Curable Powder Coatings

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

High Performances Polyurethane-Urea Polyacrylate Hybrid Emulsion Coatings with Multiple Crosslinking Structures

Synthesis and Kinetics of Polyurethane-Acrylate Oligomer

Synthesis of Polyacrylate Emulsion and the Properties of Ambient Curable Coatings

Synthesis and Characterization of Urethane/acrylate Composite Latex

Structure and composition of the surface of urethane/acrylic composite latex films

Synthesis and Characterization of Self-cross Linking Hybrid Silicone-acrylate Emulsion at Ambient Temperature

Synthesis of Hybrid Epoxy Methacrylate Resin Based on Diglycidyl Ethers and Coatings Preparation via Cationic and Free-Radical Photopolymerization

Synthesis and properties of poly(acrylates-co-urethane) adhesives for low surface energy materials

Synthesis of Epoxy Methacrylate Resin and Coatings Preparation by Cationic and Radical Photocrosslinking

Effect of prepolyurethane on the performances of poly(acrylates-co-urethane) copolymer

Photocurable Epoxy Acrylate Coatings Preparation by Dual Cationic and Radical Photocrosslinking

THE SYNTHESIS AND CHARACTERIZATION OF POLYURETHANE-ACRYLIC GRAFT EMULSION

Synthesis of Polyurethane/acrylate Hybrid Emulsions with Crosslinked Core-Shell Structure

Ambient Curable Polyacrylate Coating

Preparation and Characterization of Composites: Epdm-G-Aa/Caco3

Interaction of Polyurethane and Terbium Acetylacetonate Composite