Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Ammonia Sensing Characteristics of Quartz Resonator Coated with ZnO Nanowires Sensitive Layer

Synthesis of ZnO nanorod arrays on Zn substrates by a gas–solution–solid method and their application as an ammonia sensor

Carbon Nanotube-ZnO Nanosphere Heterostructures: Low-Temperature Chemical Reaction Synthesis, Photoluminescence, and Their Application for Room Temperature NH 3 Gas Sensor

QCM-based Humidity Sensor and Sensing Properties Employing Colloidal SnO2 Nanowires

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Highly Selective Triethylamine Gas Sensor Based on ZnO/Ti3C2Tx MXene Self-Assembly Heterostructure

Gas sensing behavior of polyvinylpyrrolidone-modified ZnO nanoparticles for trimethylamine

Enhanced Sensitivity of SAW Based Ammonia Sensor Employing GO-SnO2 Nanocomposites

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Fabrication and properties of room temperature ammonia gas sensor based on SnO2 modified WSe2 nanosheets heterojunctions

High sensitivity ammonia QCM sensor based on ZnO nanoflower assisted cellulose acetate-polyaniline composite nanofibers

Au nanoparticle-modified ZnO/SnO2 heterojunction nanocomposites for highly sensitive detection of NH3

Ammonia sensing by closely packed WO 3 microspheres with oxygen vacancies.

Precise Preparation of WO3@SnO2 Core Shell Nanosheets for Efficient NH3 Gas Sensing.

Hollow ZnWO 4 /In 2 O 3 Nanotubes for Ultrasensitive and Rapid Trace Detection of Triethylamine

Ammonia sensing by closely packed WO3 microspheres with oxygen vacancies

Nanoporous Graphene Oxide-Based Quartz Crystal Microbalance Gas Sensor with Dual-Signal Responses for Trimethylamine Detection

High-performance gas sensor based on ZnO nanowires functionalized by Au nanoparticles

Fabrication of Al-doped ZnO nanoparticles and their application as a semiconductor-based gas sensor for the detection of ammonia