Abstract:The presented paper introduces a design for a phase-locked loop (PLL) that is utilized in frequency synthesis and modulation-demodulation within communication systems and in VLSI applications. The CMOS PLL is designed using 180 nm Fabrication Technology on Cadence Virtuoso Tool with a supply voltage of 1.8 V. The performance is evaluated through simulations and measurements, which demonstrate its ability to track and lock onto the input frequency. The PLL is a frequency synthesizer implemented to generate 2.4 GHz frequency. The input reference clock from a crystal oscillator is 150 MHz square wave. Negative feedback is given by divide-by-16 frequency divider, ensuring the phase and frequency synchronization between the divided signal and the reference signal. The design has essential components such as a phase frequency detector, charge pump, loop filter, current-starved voltage-controlled oscillator (CSVCO), and frequency divider. Through their collaborative operation, the system generates an output frequency that is 16 times the input frequency. The centre frequency of the 3-stage CSVCO is 3.208 GHz at 900 mV input voltage. With an input voltage ranging from 0.4 V to 1.8 V, the VCO offers a tuning range that spans from 1.066 GHz to 3.731 GHz.PLL demonstrates a lock-in range spanning from 70.4 MHz to 173 MHz, with an output frequency range of 1.12 GHz to 2.78 GHz. It achieves a lock time of 260.03 ns and consumes a maximum power of 5.15 mW at 2.4 GHz.

Design of the Fast Acquisition PLL with Wide Tuning Range

A Fast Acquisition PLL with Wide Tuning Range

Design of the fast aequisition PLL with wide tuning range

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Fast Acquisition PLL with Tunable Loop Bandwidth

An Adaptive-Bandwidth CMOS PLL with Low Jitter and a Wide Tuning Range

A 21.8-41.6Ghz Fast-Locking Sub-Sampling PLL with Dead Zone Automatic Controller Achieving 62.7-Fs Jitter and −250.3db FoM

A fast locking charge-pump PLL with adaptive bandwidth

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

An Adaptive PLL Architecture to Achieve Fast Settling Time

A 6-12Ghz Wideband Programmable Phase-Locked Loop in 65 Nm CMOS

A 2.4-Ghz Sub-Sampling PLL with an Adaptive and No Power Contribution FLL Achieving 103.58 Fs Rms Jitter and −257.8 Db FOM

A 3.2-to-4.6 GHz Fast-Settling All-Digital PLL with Feed Forward Frequency Presetting.

A 2-GHz CMOS phase-locked loop clock generator research and design

A 21.8–41.6-Ghz Low Jitter and High FoM $_{\bm{j}}$ Fast-Locking Subsampling PLL with Dead Zone Automatic Controller

A 0.4-Ps-jitter −52-Dbc-spur Synthesizable Injection-Locked PLL with Self-Clocked Nonoverlap Update and Slope-Balanced Subsampling BBPD

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

A 0.022mm2 970µw Dual-Loop Injection-Locked PLL with −243db FOM Using Synthesizable All-Digital PVT Calibration Circuits

Design of Phase Locked Loop in 180 nm Technology

A Low Spur, Low Jitter 10-Ghz Phase-Locked Loop in 0.13-Μm CMOS Technology

A Compact, Low-Power and Low-Jitter Dual-Loop Injection Locked PLL Using All-Digital PVT Calibration