Abstract:For modern SoC systems, stringent requirements on on-chip clock generators include low area, low power consumption, environmental insensitivity, and the lowest possible jitter performance. Multiplying Delay-Locked Loop (MDLL) [1-2], subharmonically injection-locked techniques [3], and sub-sampling techniques [4-5] can significantly improve the random jitter characteristics of a clock generator. However, in order to guarantee their correct operation and optimal performance over process-voltage-temperature (PVT) variations, each method requires additional calibration circuits, which impose difficult-to-meet timing constraints. In the case of an injection-locked PLL (IL-PLL), a free-running frequency calibration is required. However, the output of an injection-locked oscillator is always fixed at the desired frequency, so a shift in the free-running frequency (e.g. caused by temperature and voltage variations) cannot be simply compensated for by using a frequency-locked loop (FLL). Therefore, we propose the use of a dual-loop topology with one free-running voltage-controlled oscillator (VCO) as a replica VCO placed inside a FLL for tracking temperature and voltage drift. The other VCO (the main VCO) is injection locked for producing a low-jitter clock, while the free-running frequency shift can be compensated for by the replica loop. The method provides robust output over temperature and voltage variations.

Design of the fast aequisition PLL with wide tuning range

Design of the Fast Acquisition PLL with Wide Tuning Range

A Fast Acquisition PLL with Wide Tuning Range

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 0.8 V Low Power Low Phase-Noise Pll

A Fast Acquisition PLL with Tunable Loop Bandwidth

A fast locking charge-pump PLL with adaptive bandwidth

An Adaptive-Bandwidth CMOS PLL with Low Jitter and a Wide Tuning Range

A 21.8-41.6Ghz Fast-Locking Sub-Sampling PLL with Dead Zone Automatic Controller Achieving 62.7-Fs Jitter and −250.3db FoM

An Adaptive PLL Architecture to Achieve Fast Settling Time

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A 3.2-to-4.6 GHz Fast-Settling All-Digital PLL with Feed Forward Frequency Presetting.

A 6-12Ghz Wideband Programmable Phase-Locked Loop in 65 Nm CMOS

A 2-GHz CMOS phase-locked loop clock generator research and design

A Compact, Low-Power and Low-Jitter Dual-Loop Injection Locked PLL Using All-Digital PVT Calibration

A 2.4-Ghz Sub-Sampling PLL with an Adaptive and No Power Contribution FLL Achieving 103.58 Fs Rms Jitter and −257.8 Db FOM

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

A 0.022mm2 970µw Dual-Loop Injection-Locked PLL with −243db FOM Using Synthesizable All-Digital PVT Calibration Circuits

Design of a Fast- Lock PLL with Adaptive Control

Hybrid Phase-Locked Loop with Fast Locking Time and Low Spur in a 0.18-Μm CMOS Process

A 21.8–41.6-Ghz Low Jitter and High FoM $_{\bm{j}}$ Fast-Locking Subsampling PLL with Dead Zone Automatic Controller