An integrated wavelength locker for waveguide DEMUXes

emil s koteles,j j he,b lamontagne,l e erickson,a delage

DOI: https://doi.org/10.1109/OFC.1999.766403

1999-01-01

Abstract:A simple technique for precisely monitoring a reference wavelength in order to lock the wavelength channels of a waveguide demultiplexer is proposed and experimentally verified. It incorporates a differential wavelength monolithically integrated on the DEMUX.

What problem does this paper attempt to address?

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Jinbiao Xiao,Xu Liu,Xiaohan Sun

DOI: https://doi.org/10.1364/oe.15.008300

IF: 3.8

2007-01-01

Optics Express

Abstract:Based on a multimode interference (MMI) coupler in slot waveguide structures, an ultracompact wavelength demultiplexer operating at 1.30 and 1.55mum wavelengths is proposed and designed by using a full-vector mapped Galerkin mode solver and a modified three-dimensional full-vector beam propagation method. The tapered waveguide structures are applied to connect the input/output channels and the MMI section for reducing excess loss. The modal characteristics of the slot waveguides are analyzed and the evolution of the injected field in whole device are demonstrated. The results show that a MMI section of 119.8mum in length, which is only 27.5% length of that of the MMI coupler by using conventional rib waveguides, is achieved with the contrasts of 26.03 and 28.14dB at wavelengths 1.30 and 1.55mum, respectively, and the insertion losses are below 0.2dB at both wavelengths.
Integrated Waveguide WDM Demultiplexers

He, J.-J.,Lamontagne, B.,Erickson, L.,Delige, A.

DOI: https://doi.org/10.1109/cleopr.1999.814734

1999-01-01

Abstract:Addresses some key issues in integrated waveguide demultiplexer technology including insertion loss, inter-channel crosstalk, and polarization sensitivity and compares and contrasts the two different contenders, etched diffraction grating and arrayed waveguide demultiplexers. Theoretical and experimental results of the effects of grating patterning defects on crosstalk are presented, as well as a novel, easy-to-make, integrated polarization compensator.
Monolithic Integrated Wavelength Demultiplexer Based on a Waveguide Rowland Circle Grating in InGaAsP/lnP

JJ He,B Lamontagne,A Delage,L Erickson,M Davies,ES Koteles

DOI: https://doi.org/10.1109/50.664075

IF: 4.7

1998-01-01

Journal of Lightwave Technology

Abstract:We present detailed modeling and experimental results for an improved design of an InGaAsP/lnP wavelength demultiplexer based on a monolithically integrated Rowland circle grating. The design incorporated ten wavelength channels at 1.55 mu m with a uniform spacing of 2 nm. The total on-chip loss was about 10 dB and the crosstalk between adjacent channels was as low as -25 dB. It was shown that low-loss etched turning mirrors can reduce the total on-chip loss by about 4 dB compared to traditional 90 degrees curved multimode waveguides. By replacing standard hat grating facets with retro-reflecting V-shaped facets in the echelle grating, the loss was further reduced by 4 dB, Polarization independent operation within a passband of 0.5 nm was achieved by using multimode output waveguide, The potential sources producing the crosstalk have been analyzed and fabrication modifications for further improvement are suggested.
Integrated Polarization Compensator for WDM Waveguide Demultiplexers

JJ He,ES Koteles,B Lamontagne,L Erickson,A Delage,M Davies

DOI: https://doi.org/10.1109/68.740711

IF: 2.6

1999-01-01

IEEE Photonics Technology Letters

Abstract:An integrated polarization compensator for wavelength-division-multiplexed waveguide demultiplexers is proposed and experimentally demonstrated. It is simple to fabricate, has many advantages over previously reported polarization compensation schemes, and is effective in both etched diffraction grating and arrayed waveguide grating based devices.
Polarization insensitive waveguide DEMUXes with integrated slab polarization compensator

He, J.J.,Koteles, E.S.,Lamontagne, B.,Erickson, L.

DOI: https://doi.org/10.1109/OFC.1999.767841

1999-01-01

Abstract:A very simple technique for controlling the inherent birefringence of any planar waveguide demultiplexer, which involves no additional processing and which is effective in any material system, is proposed, modeled, and verified by experiment.
Design of Optical Wavelength Demultiplexer Based on Off-Axis Meta-Lens

Yi Zhou,Rui Chen,Yungui Ma

DOI: https://doi.org/10.1364/ol.42.004716

2017-01-01

Abstract:We propose an off-axis meta-lens-based optical wavelength demultiplexer. The performance of the device initially proposed with four output channels (1527 -1596 nm, channel spacing 23 nm) composed of an optical fiber array is analyzed by both scalar diffraction theory and ray tracing method. The results show that the fiber energy coupling efficiency of the demultiplexer could be larger than 89% and the channel bandwidth is about 9 nm. Influences of the two key parameters, focal length f and off-axis angle a, are also investigated. We find that the minimum spectral linewidth of the channel is inversely proportional to the sine of alpha and nearly independent of f for a meta-lens with large F-number (F > 5), while the effective spectral range is negatively (positively) dependent on alpha (f). These results are significant in guiding us to build small and compact demultiplexing devices for optical telecommunication. (C) 2017 Optical Society of America
Input Signal Distribution Using Coupled Lambda/2 Standing-Wave Oscillators For Coherent Power Combining

Yingqian Huang,Xi Zi,Jinfang Zhou,Kangsheng Chen

2011-01-01

Abstract:One of the key challenges to realize a fully integrated transceiver using silicon based processes is the limited output power achievable, especially at millimeter-wave frequencies. Higher output power can be obtained by using various power combining schemes, which typically sum the output power of N identical amplifying stages coherently. Thus to ensure efficient power combining, the input signal must be distributed to all the amplifying stages on the chip with equi-phase and equi-magnitude. While Wilkinson power splitter has been employed for this purpose in the literatures, it becomes bulky and inefficient when N is large, which severely limits the number of outputs that can be combined.In this paper, a network of coupled lambda/2 standing-wave oscillators is employed to distribute the input signal. Proposed formerly for global clock distribution, theoretically, differential signals of equi-frequency, equi-phase, and equi-magnitude can be obtained by taping onto specific points in the network. It should be noted, however, that the network is especially suited for input signal distribution purpose here, since the specific power combining scheme assumes that a grid of N amplifying stages resides on the chip, which matches to the tap points in a perfect way.A 30 GHz prototype network comprised of four coupled lambda/2 standing-wave oscillators using TSMC 0.18 mu m CMOS process has been design. Post-layout simulation results are presented showing that no distinguishable difference in frequency, phase, and amplitude is observed for the multiple output differential signals. The chip has a total area (including pads) of 800 x 990 mu m(2) and has been submitted for fabrication.
Recent Advances in InP-based Waveguide Grating Demultiplexers

Koteles, E.S.,He, J.J.,Lamontagne, B.,Delage, A.

DOI: https://doi.org/10.1109/ofc.1998.657225

1998-01-01

Abstract:Summary form only given. We present detailed modeling and experimental results for an improved design of an InGaAsP/InP wavelength demultiplexer based on a monolithically-integrated Rowland circle waveguide grating fabricated using chemically-assisted ion beam etching. The design incorporates ten wavelength channels at 1.55 /spl mu/m with a uniform spacing of 2 nm and multimode output waveguides to flatten channel response and reduce sensitivity to polarization.
Using a retro-reflecting echelle grating to improve WDM demux efficiency

l e erickson,b lamontagne,j j he,a delage,mark davies,emil s koteles

DOI: https://doi.org/10.1109/LEOSST.1997.619187

1997-01-01

Abstract:The use of uncoated facets on the echelle grating in a monolithic InP WDM demux leads to a reflection loss of 5.65 dB for an index of refraction of approximately 3.18. This loss can be largely eliminated by coating the out of plane facet with gold, but it involves another processing step. An alternative is to use total internal reflecting (retro-reflecting) facets. We have fabricated a WDM demultiplexer in InP for use at 1550 nm using an echelle with retro-reflecting facets and have compared its performance to another demux on the same wafer using an echelle with flat facets.
Two-dimensional wavelength demultiplexing employing multilevel arrayed waveguides.

Jianyi Yang,Xiaoqing Jiang,Minghua Wang,Yuelin Wang

DOI: https://doi.org/10.1364/OPEX.12.001084

IF: 3.8

2004-01-01

Optics Express

Abstract:Two-dimensional (2D) optical wavelength demultiplexing is demonstrated by employing multilevel arrayed waveguides as a 2D diffraction grating, named the 2D arrayed waveguide grating (2D-AWG). Since the monochromatic lightwave is diffracted by the 2D-AWG to a series of periodic spots with 2D diffraction orders in both x and y directions while the dispersion direction is never parallel to the x or y direction, we can obtain 2D wavelength demultiplexing exploiting diffraction orders of either the x or y direction. One of the two dispersion components is designed much larger than the other, and the correspondent spatial free spectral range component is set properly to ensure high diffraction efficiency. The input and output ports can also be designed based on the multilevel lightwave circuit (MLC), and their level planes can be tuned parallel to that of the MLC-based 2D-AWG, which makes it feasible to integrate the 2D-AWG with the input port and/or the output port. It provides a promising way to realize large-scale and high-density optical multiplexers/demultiplexers. (C) 2004 Optical Society of America.
Tunable V-Coupled-Cavity Semiconductor Laser Monolithically Integrated with Monitoring Photodiodes Using Deeply Etched Reflective Trenches

Xiaolu Liao,Jianjun Meng,Jian-Jun He

DOI: https://doi.org/10.1117/12.2073603

2014-01-01

Abstract:We present a 1560-nm-band digitally wavelength tunable V-coupled-cavity semiconductor laser monolithically integrated with two waveguides based monitoring photodiodes (MPD) through deeply etched reflective trenches. The reflective trenches are designed to be 1.16 mu m wide, about three quarters of the wavelength, and are deeply etched through the waveguide with a depth larger than 4 mu m. Due to the high reflectivity of the etched trenches, a low threshold current of 19mA is achieved. Using a single electrode control, wavelength tuning of 22 channels at 100GHz spacing with SMSR above 35 dB is obtained. The relationship between the photocurrents of the two MPD at the two waveguide branches and the laser output power from the coupler side is investigated as a function of the wavelength. Since the integrated tunable laser with MPDs is very compact and does not involve any grating or epitaxial regrowth, it is suitable for low-cost multifunctional photonic applications for access and data center networks.
Inverse Design of a Wavelength (de)multiplexer for 1.55- and 2-Μm Wavebands by Using a Hybrid Analog-Digital Method

Xuyu Deng,Aolong Sun,Qiyuan Yi,Guanglian Cheng,Sizhe Xing,Jianyang Shi,Ziwei Li,Chao Shen,Yi Zou,Li Shen,Junwen Zhang,Nan Chi

DOI: https://doi.org/10.1109/jlt.2024.3386668

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:Recently, the emerging 2-mu m waveband has gained increasing interest due to its great potential for a wide scope of applications. The 2-mu m waveband is considered a novel communication window with distinct advantages of lower signal loss, better fabrication tolerance and broader gain bandwidth. Considering the advantages of 2-mu m waveband, wavelength division multiplexing of 1.55- and 2-mu m wavebands is one of the effective means to solve the current communication capacity crisis. Therefore, wavelength (de)multiplexer for 1.55- and 2-mu m wavebands is a crucial component. However, traditional design methods make it challenging to create a wavelength (de)multiplexer with a large bandwidth and compact footprint. Here, we proposed and experimentally demonstrated a wavelength demultiplexer for 1.55- and 2-mu m wavebands with an ultra-compact footprint of 3 x 3 mu m(2) utilizing an inverse design method called hybrid analog-digital algorithm to reduce computational cost and improve the device performance. Based on this algorithm, we further created three adjustable optimization parameters to achieve optimal device performance. We provide detailed explanations for the selection of these optimization parameters. The designed device has experimentally achieved a bandwidth of 100 nm for 1.55- and 2-mu m wavebands, with the insertion loss less than 1.2 and 0.9 dB, and the crosstalk less than -17.7 and -16.4 dB, respectively. Furthermore, based on a fabricated wavelength division multiplexing chip, we demonstrated a dual-waveband data transmission system that achieved a data rate of 138 Gbps at 1550 nm and 84 Gbps at 2004 nm, drawing a promising application for high-speed optical communications in the future.
Novel Wavelength Multiplexer Using (<italic>N</italic> + 1) × (<italic>N</italic> + 1) Arrayed Waveguide Grating and Polarization-Combiner-Rotator on SOI Platform

Jun Zou,Xiao Ma,Xiang Xia,Changhui Wang,Ming Zhang,Jinhua Hu,Xuyang Wang,Jian-Jun He

DOI: https://doi.org/10.1109/JLT.2021.3053837

IF: 4.7

2021-01-01

Journal of Lightwave Technology

Abstract:We propose an ultra-compact novel wavelength multiplexer employing a (N + 1) × (N + 1) arrayed waveguide grating (AWG) and a polarization-combiner-rotator (PCR) on the SOI platform, to realize a multiplexing for 2N wavelengths with a spacing of Δλ. The (N + 1) × (N + 1) AWG works at a bidirectional way to provide two groups of N × 1 wavelength multiplexing with each group having a channel spacing of 2×Δλ, and the central wavelengths of all input channels in one group have a wavelength shift of Δλ with respect to those in the other group. The double channel spacing results in a significant decrease on the footprint of the (N + 1) × (N + 1) AWG-based multiplexer compared with a conventional 2N × 1 AWG multiplexer with the same wavelength spacing Δλ. Due to the fact that a single mode fiber is insensitive to the polarization of input light, if we consider short reach datacom applications such as 100/400 GbE, the two separate multiplexing outputs of the (N + 1) × (N + 1) AWG can be combined as one output with one half wavelengths working at TE polarization and the other at TM polarization by employing a low loss and broadband PCR. In the experiment, we demonstrate a 16 × 200 GHz multiplexer based on a 9 × 9 AWG. The experimental results show that the on-chip loss of the fabricated multiplexer is 2.7 dB and the loss uniformity is 0.5 dB. The 1-dB and 3-dB bandwidths are >0.56 nm (i.e., 35% of the wavelength spacing) and >1.1 nm (i.e., 69% of the wavelength spacing), respectively. They can also be further increased by decreasing the gap between adjacent input waveguides at the interfaces of star couplers of the designed AWG without inducing an excess loss. The proposed multiplexer has great potential for application to future super large capacity (> Tb/s) data transmission systems.
An Ultra-Compact Dual-Channel Multimode Wavelength Demultiplexer Based on Inverse Design

Huan Yuan,Jie Huang,Zehao Wang,Jinping Zhang,Yang Deng,Guiling Lin,Jiagui Wu,Junbo Yang

DOI: https://doi.org/10.1016/j.rinp.2021.104489

IF: 4.565

2021-01-01

Results in Physics

Abstract:An ultra-compact multimode wavelength demultiplexer (MWD) with a footprint of 3.6 × 2.4 μm2 was designed. Its size is approximately two orders of magnitude smaller than the size of the traditional waveguide-based device. Moreover, the designed demultiplexer is multifunctional, and can realize wavelength demultiplexing and mode conversion at the same time. This MWD splits light at the wavelengths of 1450 nm and 1550 nm and simultaneously converts the input light from the fundamental transverse electric (TE0) mode to the first-order transverse electric (TE1) mode. The direct binary search (DBS) algorithm was employed to simulate the design. The results show that the insertion loss of the demultiplexer is −1.26 dB and −0.82 dB for the upper channel (wavelength 1450 nm) and lower channel (wavelength 1550 nm), while the crosstalk values are maintained as low as −18.10 dB and −23.35 dB, respectively. Additionally, a similar structure can be expanded to several modes. Based on these advantages, this multifunctional photonics device is expected to be used extensively in advanced photonic integration circuits.
Design of Hybrid Free-Space Wavelength-Division Multiplexers for Integration

XG Deng,JY Yang,JZ Zou,RT Chen

DOI: https://doi.org/10.1117/12.469645

2002-01-01

Abstract:We design a hybrid free-space wavelength-division multiplexers (MUX) that favor integration of matured high performance grating-based MUX and planar waveguide devices. By optimizing the component interfaces, we pursuit a divide-and-conquer method in the proposed hybrid integration. Meanwhile, a novel 6-channel coarse MUX based on layered diffractive optics is successfully designed. These two methods combined are promising in integrating multiple optical functions with cost-effective mass production.
Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator

Wenhui Wang,Yanzhe Tang,Yunxiang Wang,Hongchang Qu,Yaming Wu,Tie Li,Jianyi Yang,Yuelin Wang,Ming Liu

DOI: https://doi.org/10.1023/B:OQEL.0000025795.18597.c8

IF: 3

2004-01-01

Optical and Quantum Electronics

Abstract:An optical wavelength demultiplexer with the etched diffraction grating (EDG) on the silicon-on-insulator (SOI) material is demonstrated. Fabricated by the wet-anisotropic-etching method, 90° turning mirrors are used to bend waveguides, and the size of the EDG-based demultiplexer is minimized to only 16×2.5 mm 2 . The crosstalk is below −16 dB. The on-chip loss is about 9.97 dB, which is composed of about 8.72 dB excess loss and 1.25 dB diffraction loss. The polarization-dependent central wavelength shift is below 0.13 nm, and the polarization-dependent loss is about 0.35 dB. The sources of the crosstalk and loss are discussed in details, and the related measures to improve the performance are also presented.
Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer

Alexander Y. Piggott,Jesse Lu,Konstantinos G. Lagoudakis,Jan Petykiewicz,Thomas M. Babinec,Jelena Vučković

DOI: https://doi.org/10.1038/nphoton.2015.69

2015-04-01

Abstract:Integrated photonic devices are poised to play a key role in a wide variety of applications, ranging from optical interconnects and sensors to quantum computing. However, only a small library of semi-analytically designed devices are currently known. In this paper, we demonstrate the use of an inverse design method that explores the full design space of fabricable devices and allows us to design devices with previously unattainable functionality, higher performance and robustness, and smaller footprints compared to conventional devices. We designed a silicon wavelength demultiplexer that splits $1300~\mathrm{nm}$ and $1550~\mathrm{nm}$ light from an input waveguide into two output waveguides, and fabricated and characterized several devices. The devices display low insertion loss $\left(2 - 4~\mathrm{dB}\right)$, high contrast $\left(12 - 17~\mathrm{dB}\right)$, and wide bandwidths $\left(\sim 100~\mathrm{nm} \right)$. The device footprint is $2.8 \times 2.8 ~\mathrm{\mu m}$, making this the smallest dielectric wavelength splitter to date.

Optics
Polarization-independent Wavelength Demultiplexer Based on a Single Etched Diffraction Grating Device

Chenguang Li,Bo Xiong,Tao Chu

DOI: https://doi.org/10.1038/s44172-023-00055-6

2023-01-01

Communications Engineering

Abstract:Polarization-compatible receivers are indispensable in transceivers used for wavelength division multiplexing optical communications, as light polarization is unpredictable after transmission through network fibers. However, the strong waveguide birefringence makes it difficult to realize a polarization-independent wavelength demultiplexer in a silicon photonic receiver. Here, we utilized the birefringence effect for simultaneously demultiplexing wavelengths and polarizations, and experimentally demonstrated a polarization-independent wavelength demultiplexer with a single device on a SiPh platform. The principle was validated on an etched diffraction grating, which successfully split the arbitrarily polarized light containing four wavelengths into eight channels with single-polarization and single-wavelength signals. Polarization-dependent losses of 0.5–1.8 dB, minimum insertion loss of 0.5 dB, and crosstalks lower than −30 dB were experimentally measured for the fabricated etched diffraction grating. Thus, a promising general solution was developed for implementing polarization-independent wavelength division multiplexing receivers and other polarization-independent devices on photonics platforms with birefringent waveguide devices.
Compact Dense Wavelength-Division (de)multiplexer Utilizing a Bidirectional Arrayed-Waveguide Grating Integrated with a Mach–Zehnder Interferometer

Sitao Chen,Xin Fu,Jian Wang,Yaocheng Shi,Sailing He,Daoxin Dai

DOI: https://doi.org/10.1109/jlt.2015.2405510

IF: 4.7

2015-01-01

Journal of Lightwave Technology

Abstract:A compact wavelength-division (de)multiplexer is proposed and demonstrated experimentally to achieve doubled channel number and halved channel spacing by utilizing a bidirectional arrayed-waveguide grating integrated with an Mach-Zehnder interferometer optical interleaver. As an example, an 18-channel wavelength-division (de)multiplexer with a channel spacing of 200 GHz is designed and fabricated. The measured excess loss is about 8 dB and the channel crosstalk is -15 ~ -18 dB. The footprint of this fabricated (de)multiplexer is about 520 μm × 190 μm.
Implementation of on-chip multi-channel focusing wavelength demultiplexer with regularized digital metamaterials

Jie Huang,Junbo Yang,Dingbo Chen,Wei Bai,Jingmin Han,Zhaojian Zhang,Jingjing Zhang,Xin He,Yunxin Han,Linmei Liang

DOI: https://doi.org/10.1515/nanoph-2019-0368

IF: 7.5

2020-01-01

Nanophotonics

Abstract:Adiabatic waveguide taper and on-chip wavelength demultiplexer are the key components of photonic integrated circuits. However, these two kinds of devices which were designed by the traditional semi-analytic methods or the brute-force search methods usually have large size. Here, based on the regularized digital metamaterials, a two-channel focused wavelength demultiplexer with a footprint of 2.4 x 10 mu m(2) has been proposed. The designed demultiplexer can directly connect to a grating coupler under the absence of a long adiabatic waveguide taper. The objective first method and the modified steepest descent method are used to design the demultiplexer which splits 1520 nm and 1580 nm light. Experimental results show that the insertion loss of the upper (lower) channel of the demultiplexer is -1.77 dB (-2.10 dB) and the crosstalk is -25.17 dB (-12.14 dB). Besides, the simulation results indicate that the fabrication tolerance of the device can reach +/- 20 nm in etching depth and +/- 10 nm in plane size changing. Benefitted from the extensibility of the design method, other types of ultra-compact "focused" devices, like mode splitters, mode converters, and power splitters can also be designed. Most importantly, this design method can be used to design devices with more complicated functionalities, such as multi-channel focused wavelength demultiplexers.

An integrated wavelength locker for waveguide DEMUXes

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Integrated Waveguide WDM Demultiplexers

Monolithic Integrated Wavelength Demultiplexer Based on a Waveguide Rowland Circle Grating in InGaAsP/lnP

Integrated Polarization Compensator for WDM Waveguide Demultiplexers

Polarization insensitive waveguide DEMUXes with integrated slab polarization compensator

Design of Optical Wavelength Demultiplexer Based on Off-Axis Meta-Lens

Input Signal Distribution Using Coupled Lambda/2 Standing-Wave Oscillators For Coherent Power Combining

Recent Advances in InP-based Waveguide Grating Demultiplexers

Using a retro-reflecting echelle grating to improve WDM demux efficiency

Two-dimensional wavelength demultiplexing employing multilevel arrayed waveguides.

Tunable V-Coupled-Cavity Semiconductor Laser Monolithically Integrated with Monitoring Photodiodes Using Deeply Etched Reflective Trenches

Inverse Design of a Wavelength (de)multiplexer for 1.55- and 2-Μm Wavebands by Using a Hybrid Analog-Digital Method

Novel Wavelength Multiplexer Using (<italic>N</italic> + 1) × (<italic>N</italic> + 1) Arrayed Waveguide Grating and Polarization-Combiner-Rotator on SOI Platform

An Ultra-Compact Dual-Channel Multimode Wavelength Demultiplexer Based on Inverse Design

Design of Hybrid Free-Space Wavelength-Division Multiplexers for Integration

Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator

Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer

Polarization-independent Wavelength Demultiplexer Based on a Single Etched Diffraction Grating Device

Compact Dense Wavelength-Division (de)multiplexer Utilizing a Bidirectional Arrayed-Waveguide Grating Integrated with a Mach–Zehnder Interferometer

Implementation of on-chip multi-channel focusing wavelength demultiplexer with regularized digital metamaterials