Abstract:Abstract An H - ion source is being operated at the new 160 MeV linear injector (Linac4) of the CERN accelerator complex. The source’s plasma is of the Radio Frequency Inductively Coupled Plasma type (RF-ICP), without magnetic cusp and runs with Cs-loss compensation [1]. Vertical downward oriented filter- and electron dump-dipolar magnetic fields expand over the plasma chamber, beam-formation, beam-extraction and electron dump regions and generate horizontal asymmetry and beam angular deflection partially compensated by mechanical alignment of the front-end. The H - beam is generated via volume and caesiated plasma surface modes, the latter inducing a radial asymmetry characterized by an increased current density close to the plasma electrode surface [2]. Asymmetries affecting the meniscus shape, or its current density have to be simulated via 3D Particle In Cell Monte Carlo (PIC-MC) solvers, such as the Orsay Negative Ion eXtraction code (ONIX) [3]. Validation of these simulations require dedicated measurements. This contribution describes experimental methods newly implemented at CERN’s ion source test stand and initial results for Optical and Beam Emission Spectroscopy (OES, BES), emittance and beam profile measurements. In a later stage, the gathered data sets can be compared to source plasma parameters and extracted beam parameters from PIC-MC simulations, once coupled to the Ion Beam Simulation (IBSimu) [4] beam transport code. The experimental parameter space includes RF-power, density of neutrals, position of the RF coil and extraction field. Beams of H - , D - and protons were produced; examples of measured data are presented in this contribution.

Initial Test Results from a Multicusp Source for TRIUMF's Radioactive Beam Facility

Understanding radioactive ion beam production at ISAC through yield measurements and simulations

Beam Formation Studies on the CERN IS03b H Source

A fast-switching magnet serving a spallation-driven ultracold neutron source

LET calibration of ion microbeams and their SEE cross-section characterisation

[Risk factors associated with invasive fungal infection in orthotopic liver transplantation].

3D shape analysis using overcomplete spherical wavelets: Application to BLEB detection in cell biology

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

Recent H- diagnostics, plasma simulations, and 2X scaled Penning ion source developments at the Rutherford Appleton Laboratory

Collision-Induced Dissociation at TRIUMF's Ion Trap for Atomic and Nuclear science

Transuranium isotopes at ISAC/TRIUMF

A Prototype Compact Accelerator Driven Neutron Source for Canada Supporting Medical and Scientific Applications

Conceptual Design of a Low-Energy Ion Beam Storage Ring and a Recoil Separator to Study Radiative Neutron Capture by Radioactive Ions

Beam Simulation Studies of ECR Beam Extraction and Low Energy Beam Transport for FRIB.

The TULIP project : first on-line result and near future

Design of 11.8 MHZ Buncher for Isac at Triumf

Development of a Radio-Frequency Quadrupole Accelerator for the HL-2A/2M Tokamak Diagnostic System

Critical slowing down near the smectic-A-hexatic-B transition

Short intense ion pulses for materials and warm dense matter research

Development and Status of the FRIB 28 GHz SC ECRIS

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration