Abstract:In the actual industrial production process, the method of adaptively tuning proportional–integral–derivative (PID) parameters online by neural network can adapt to different characteristics of different controlled objects better than the controller with PID. However, the commonly used microcontroller unit (MCU) cannot meet the application scenarios of real time and high reliability. Therefore, in this paper, a closed-loop motion control system based on BP neural network (BPNN) PID controller by using a Xilinx field programmable gate array (FPGA) solution is proposed. In the design of the controller, it is divided into several sub-modules according to the modular design idea. The forward propagation module is used to complete the forward propagation operation from the input layer to the output layer. The PID module implements the mapping of PID arithmetic to register transfer level (RTL) and is responsible for completing the output of control amount. The main state machine module generates enable signals that control the sequential execution of each sub-module. The error backpropagation and weight update module completes the update of the weights of each layer of the network. The peripheral modules of the control system are divided into two main parts. The speed measurement module completes the acquisition of the output pulse signal of the encoder and the measurement of the motor speed. The pulse width modulation (PWM) signal generation module generates PWM waves with different duty cycles to control the rotation speed of the motor. A co-simulation of Modelsim and Simulink is used to simulate and verify the system, and a test analysis is also performed on the development platform. The results show that the proposed system can realize the self-tuning of PID control parameters, and also has the characteristics of reliable performance, high real-time performance, and strong anti-interference. Compared with MCU, the convergence speed is far more than three orders of magnitude, which proves its superiority.

An Implementation Of A Networked Pi Controller Over Ip Network

On the gain scheduling for networked PI controller over IP network

An Active Queue Management Scheme Using Neural Network Based Predictive Control

Real-time scheduling scheme for EPA networks

A Novel Auto-Tuning Robust Pid Controller for Networked Control System

Gain Scheduler Middleware: A Methodology to Enable Existing Controllers for Networked Control and Teleoperation—Part I: Networked Control

Gain Adaptation of Networked Dc Motor Controllers Based on Qos Variations

The Remote Fan Control Based on Real-Time Ethernet

Enhancing Industrial Communication with Ethernet/Internet Protocol: A Study and Analysis of Real-Time Cooperative Robot Communication and Automation via Transmission Control Protocol/Internet Protocol

Design And Evaluation Of Event-Driven Networked Realtime Control Systems With Iec Function Blocks

Gain Scheduling Middleware for Networked Mobile Robot Control

Design and implementation of a new fuzzy PID controller for networked control systems

Stabilization Of Networked Pi Control System Using Fuzzy Logic Modulation

Neural Network Middleware For Model Predictive Path Tracking Of Networked Mobile Robot Over Ip Network

Structured Neural-PI Control for Networked Systems: Stability and Steady-State Optimality Guarantees

Fuzzy Speed Control of Networked Motion Control Systems

A Design of FPGA-Based Neural Network PID Controller for Motion Control System

Real-time Gain Tuning of PI Controllers for High-Performance PMSM Drives

Integrated Feedback Scheduling and Control Codesign for Motion Coordination of Networked Induction Motor Systems

Fuzzy speed control and stability analysis of a networked induction motor system with time delays and packet dropouts

Network-based controller adaptation based on QoS negotiation and deterioration