Abstract:To determine all the material constants of a piezoelectric crystal using the IEEE resonance method or ultrasonic method, several samples with specific geometries and orientations are required, and the obtained results may be somewhat self-contradictory. The resonant ultrasound spectroscopy (RUS) can determine full material constants of a single piezoelectric sample by matching the numerically computed eigenfrequencies to the measured resonance spectrum. However, typically the usage of PZT transducers for excitation and reception makes the testing complicated and may add additional mass and damping. In this work, we propose a new method called partial electrode electromechanical impedance spectroscopy (PE-EMIS), which can obtain all the elastic, piezoelectric constants, and related internal frictions of a piezoelectric crystal by just using a single sample without additional transducers. In PE-EMIS, two small PEs are fabricated on one corner of a piezoelectric sample, and the sample's resonance frequencies, along with the internal frictions of the k th eigenmode, can be accurately obtained from the conductance spectrum measured using an impedance analyzer. The PE-EMIS experiment is carried out on a rectangular parallelepiped PZT-4 piezoelectric ceramic, and the extracted material constants are highly repeatable. Three of the extracted elastic constants ( c11E , c33D , and c66E ) are validated by the traditional wave propagation method. Due to its simplicity, convenience, and accuracy, the proposed PE-EMIS is expected to be widely used for characterization of piezoelectric materials in near future.

Accurate Determination of Complex Materials Coefficients of Piezoelectric Resonators

An Accurate Method for the Determination of Complex Coefficients of Single Crystal Piezoelectric Resonators I: Theory

An Accurate Method for the Determination of Complex Coefficients of Single Crystal Piezoelectric Resonators II: Design of Measurement and Experiments

A New Method for Evaluation of the Complex Material Coefficients of Piezoelectric Ceramics in the Radial Vibration Modes.

Determination of Full Set Material Constants of Piezoceramics from Phase Velocities

Characterization of Piezoelectric Materials Using Ultrasonic and Resonant Techniques

Derivation of Equivalent Material Coefficients of 2-2 Piezoelectric Single Crystal Composite

Rapidly Measuring Elastic Coefficients of New Piezoelectric Materials Using Resonant Ultrasound Spectroscopy

Determining Full Matrix Constants of Piezoelectric Crystal From a Single Sample Using Partial Electrode Electromechanical Impedance Spectroscopy

A Global Optimization Method to Determine the Complex Material Constants of Piezoelectric Bars in the Length Thickness Extensional Mode

Simplified Determination of Nonlinear Coefficients in Piezoelectric Transducers

Effect of DC Bias Field on the Complex Materials Coefficients of Piezoelectric Resonators

Characterization of Piezoelectric Materials with Large Piezoelectric and Electromechanical Coupling Coefficients.

Effective Piezoelectric Coefficients of Cement-Based 2–2 Type Piezoelectric Composites Based on a Multiscale Homogenization Model

Numerical Characterization of Piezoceramics Using Resonance Curves

Temperature Dependence of the Complete Material Coefficients Matrix of Soft and Hard Doped Piezoelectric Lead Zirconate Titanate Ceramics

Determination of Temperature Dependence of Piezoelectric Coefficients Matrix of Lead Zirconate Titanate Ceramics by Quasi-Static and Resonance Method

Measurement of elastic constants of limited-size piezoelectric ceramic sample by ultrasonic method

Determining the Independent Piezoelectric Coefficients Using Laser Interferometric Method

Measurement of Solid Materials’ Young’s Modulus by Piezoelectric Resonance and ANSYS Simulation Method

Analysis and Guideline for Determining Piezoelectric Coefficient for Films With Substrate Constraint