Abstract:Wind power is intermittent and fluctuating renewable source that irritates system performance during normal operation. Besides, wind speed changes caused by tower shadow and wind shear effects which known as 3p oscillations increase the level of active power variations and impede wind power expansion. Several power quality concerns such as voltage constancy and flicker emissions manifested owing to lower short circuit ratios and grid impedance angle at the wind turbine point of connection. This article presents a combined active and reactive power mitigation approach for a doubly-fed induction generator DFIG in order to reduce output power pulsations, minimize voltage perturbations so as to alleviate flicker emissions for weak distribution networks. The principal premise of the proposed scheme relies on varying the wind generator speed in order to store the 3p oscillations in the wind turbine WT shaft inertia. Furthermore, an optimal grid impedance angle that cancels voltage fluctuations and hence attains further reduction of flicker is obtained. A detailed system model is built in MATLAB/SIMULINK to explore the system performance for a range of wind speed changes. The obtained results reveal the significance of the proposed methodology to allay flicker emissions of DFIG operated in weak distribution networks and to comply with grid code regulations.

Flicker mitigation strategy for a doubly fed induction generator by torque control

Flicker Mitigation by Individual Pitch Control of Variable Speed Wind Turbines with DFIG

Flicker Mitigation by Speed Control of Permanent Magnet Synchronous Generator Variable-Speed Wind Turbines

Control of Doubly-Fed Induction Generator to Ride-Through Recurring Grid Faults

Flicker Study on Variable Speed Wind Turbines with Permanent Magnet Synchronous Generator

Flicker Mitigation by Active Power Control of Variable-Speed Wind Turbines with Full-Scale Back-to-Back Power Converters

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

Mitigation of Wind Power Fluctuation by Active Current Control of Variable Speed Wind Turbines

Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid Faults

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance

Improved Vector Control of DFIG Based Wind Turbine During Grid Dips and Swells

A Proposed Flicker Mitigation Scheme of DFIG in Weak Distribution Networks

Voltage Fluctuation and Flicker Suppression Strategy of DFIG Based on Resonant Regulator

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

Research on design and simulation experiment of virtual inertia controller for doubly fed induction generator

Comparison of control strategies for Doubly fed induction generator under recurring grid faults

Guaranteed Performance Control of DFIG Variable-Speed Wind Turbines

Magnitude and Frequency Control of Grid-Connected Doubly Fed Induction Generator Based on Synchronised Model for Wind Power Generation

Dynamic Behavior Of Doubly Fed Induction Generator Wind Turbines Under Three-Phase Voltage Dips