Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

Analysis and design of wideband bandpass filters with improved upper stopband

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Design of a Wide-Stopband Bandpass Filter Using Stepped Impedance Resonators

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Ultra-Wide Stopband Low-Pass Filter Using Multiple Transmission Zeros

Wideband and wide stopband superconducting bandpass filter using asymmetric stepped‐impedance resonators connected to open stub

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Synthesis Design of Wideband Bandpass Filter With High Selectivity and Harmonic Suppression

Wideband bandpass filter with ultra-wide stopband based on cross-shaped parallel coupled lines

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Design of Superconducting Ultra-Wideband Filter with Wide Stopband Based on Quintuple-Mode Resonator

Design of Wide Stopband for Waveguide Low-Pass Filter Based on Circuit and Field Combined Analysis

Narrow-Slot Bandpass Filter Based on Folded Substrate-Integrated Waveguide with Wide Out-Of-Band Rejection

Design of 140ghz Narrow Band-pass Planar Filters Based on Open Loop Resonators

Design of high selectivity tri-band bandpass filter based on triple transversal transmission path

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance