Abstract:A new type of rotating anticathode X-ray generator, where an electron beam of up to 60 keV irradiates the inner surface of a U-shaped Cu anticathode, has achieved a beam brilliance of 130 kW mm(-2) (at 2.3 kW). A higher-flux electron beam is expected from simulation by optimizing the geometry of a combined-function-type magnet instead of the fringing field of the bending magnet. In order to minimize the size of the X-ray source the electron beam has been focused over a short distance by a new combined-function bending magnet, whose geometrical shape was determined by simulation using the Opera-3D, General Particle Tracer and CST-STUDIO codes. The result of the simulation clearly shows that the role of combined functions in both the bending and the steering magnets is important for focusing the beam to a small size. FWHM sizes of the beam are predicted by simulation to be 0.45 mm (horizontal) and 0.05 mm (vertical) for a 120 keV/75 mA beam, of which the effective brilliance is about 500 kW mm(-2) on the supposition of a two-dimensional Gaussian distribution. High-power tests have begun using a high-voltage 120 kV/75 mA power supply for the X-ray generator instead of 60 kV/100 mA. The beam focus size on the target will be verified in the experiments.

Study of Low-Voltage Radial Convergent Sheet Electron Optical System

Study on Radial Sheet Beam Electron Optical System for Miniature Low-Voltage Traveling-Wave Tube

Study on the Radial-Sheet-Beam Electron Optical System

Design of the Radial Divergent Sheet Beam Electron Optical System with Radial Quasi-Uniform Magnetic Field

Design of the Radial Divergent Sheet Beam Electron Optical System with Cylindrical Emission Surface

An Electron Optical System for Sheet Beam Vacuum Electron Devices

A Novel Tunable PCM Focusing System for a 220 GHz Sheet Beam Electron Gun

Study of the Radial Tunable Pcm Focusing System

Electron-optical System for Dual Radial Sheet Beams for Ka-band Cascaded Angular Log-Periodic Strip-Line Traveling Wave Tube

Theoretical research and simulation on focusing sheet electron beam with periodic elliptical solenoid

An Ultrahigh Compression Ratio Sheet Beam Electron-Optical System for 0.66-THz Traveling-Wave Tubes

340Ghz EIK Electron-Optical System with High Compression Ratio

Study of Sheet Beam Electron Optical System and Energy Coupler for Wideband 340ghz TWT

Design of Low Current Density Elliptical Sheet Beam Gun

Relativistic approach to a low perveance high quality matched beam for a high efficiency Ka-Band klystron

Simulation Research on the Sheet Electron Beam Gun

Research and development of an electron beam focusing system for a high-brightness X-ray generator

Electron Optical System with Uniform Magnetic Field for 220 GHz Sheet Beam TWT

Uniform Permanent Magnetic Field with Hemi-Ladder Structure for Sheet Electron Beam Focusing

Design and experiment of the focus system based on periodic elliptic magnetic field

Relativistic versus Nonrelativistic Approaches to a Low Perveance High Quality Matched Beam for a High Efficiency Ka-Band Klystron