Abstract:Wireless electromagnetic sensing is a passive, non-destructive technique for measuring physical and chemical changes through permittivity or conductivity changes. However, the readout is limited by the sensitivity of the materials, often requiring complex sampling, particularly in the GHz range. We report capacitive dielectric temperature sensors based on polydimethylsiloxne (PDMS) loaded with 10 vol% of inexpensive, commercially available conductive fillers including copper powder (Cu), graphite powder (GP) and milled carbon fibre powder (CF). The sensors are tested in the range of 20°C to 110°C, with enhanced sensitivity from 20 to 60°C, and relative response of up to 85.5% at 200 MHz for CF loaded capacitors. Additionally, we demonstrate that operating frequency influences the relative sensing response by as much as 15.0% in loaded composite capacitors. Finally, we demonstrate the suitability of PDMS-CF capacitors as a sensing element in wirelessly coupled chipless resonant coils tuned to 6.78 MHz with a readout response, in the resonant frequency of the sensor. The wireless readout of the PDMS-CF chipless system exhibited an average sensitivity of 0.38 %°C-1 which is a 40x improvement over a pristine PDMS-based capacitive sensor and outperforms state of the art frequency-domain radio frequency (RF) temperature sensors including carbon-based composites at higher loadings. Exploiting the high sensitivity, we interrogate the sensor wirelessly using a low-cost and portable open-source NanoVNA demonstrating a relative response in the resonant frequency of the reader coil of 48.5%, with the response in good agreement with the instrumentation-grade vector network analyzers (VNAs), demonstrating that the sensors could be integrated into an inexpensive and portable measurement setup that does not rely on specialty equipment or highly trained operators.

A high sensitivity capacitively-loaded UHF RFID temperature sensor tag using PTFE material

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Uhf Rfid Temperature Sensor Tag Using Novel Hdpe-Bst Composite Material

High-Sensitivity Rfid Sensing Antennas: from Sensing Mechanism Selections to Antennas Structure Designs

Temperature Sensor Tag for Passive UHF RFID Systems

A semi-passive UHF RFID tag with on-chip temperature sensor

A Low-Power Passive UHF Tag With High-Precision Temperature Sensor for Human Body Application

Design and Implementation of a High Sensitivity Fully Integrated Passive UHF RFID Tag

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Temperature sensor integrated curl resonator chipless RFID tag for high capacity data identification applications

An UHF band planar resonator temperature sensor constructed from high-performance titanium dioxide system microwave dielectric ceramics: Toward integrated ceramic-based sensor devices

Thermotag: item-level temperature sensing with a passive RFID tag

High Data Capacity Chipless RFID Tag Based on Time Domain Scattering Modulation

Read range and sensitivity study of RFID temperature sensors

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

Dielectrically-Loaded Cylindrical Resonator-Based Wireless Passive High-Temperature Sensor

Large-Area Conductor-Loaded PDMS Dielectric Composites for High-Sensitivity Wireless and Chipless Electromagnetic Temperature Sensors

A Dual Resonance Frequency Selective Surface Temperature Sensor with Linear Frequency-Temperature Behavior

A chipless RFID tag for humidity sensing

Low Dielectric Loss Polymer-Ceramic Composites for Wireless Temperature Sensation

Wireless High Temperature Sensing Chipless Tag Based on a Diamond Ring Resonator