Graphene-based Tunable Plasmonic Bragg Reflector with a Broad Bandwidth

Jin Tao,XueChao Yu,Bin Hu,Alexander Dubrovkin,Qi Jie Wang

DOI: https://doi.org/10.1364/ol.39.000271

IF: 3.6

2014-01-01

Optics Letters

Abstract:We show theoretically that Bragg stopband and defect resonance mode can be achieved and dynamically tuned over a wide wavelength range by a small change in Fermi energy level of graphene, in graphene plasmonic waveguide structures.

What problem does this paper attempt to address?

Tunable multiple channeled phenomena in graphene-based plasmonic Bragg reflectors

Jicheng Wang,Hongyan Shao,Ci Song,Gaige Zheng,Zheng-Da Hu,Tian Sang

DOI: https://doi.org/10.1063/1.4983476

IF: 1.697

2017-05-01

AIP Advances

Abstract:Plasmonic Bragg reflectors based on graphene with multiple channeled phenomena are proposed and investigated numerically. As a mid-infrared waveguide, the monolayer graphene exhibits locally variable optical properties through the modulation of electric fields. The periodical change of the effective refractive index (ERI) on graphene can be determined by applying external gate voltage. When we introduce an unmatched configuration or gate voltage, periodicity is disrupted, and a defect resonance mode is generated. At this point, the structure can be regard as a Fabry-Perot cavity. Accordingly, multiple-channel effects can be achieved by introducing cascaded multiple defects or including double symmetrical Fabry-Perot structures. This design shows applications potential in the graphene-based optoelectronic devices, particularly in the development of low-cost hyperspectral imaging sensors in mid-infrared region.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Tunable Slow Wave Waveguides Based on Graphene

XiLiang Peng,Ran Hao,ErPing Li

DOI: https://doi.org/10.1364/oedi.2015.ow2c.7

2015-01-01

Abstract:The dynamic control of wide band slow surface wave in a graphene-based grating waveguide is proposed here. The extreme large bandwidth and strongly delay has been obtained and the group index can be dynamically tuned.
Graphene Plasmonics for Tuning Photon Decay Rate Near Metallic Split-Ring Resonator in a Multilayered Substrate.

Yongpin P. Chen,Wei E. I. Sha,Lijun Jiang,Jun Hu

DOI: https://doi.org/10.1364/oe.23.002798

IF: 3.8

2015-01-01

Optics Express

Abstract:Study of photon decay rate is essential to various optical devices, where graphene is an emerging building block due to its electrical tunability. In this paper, we study photon decay rate of a quantum emitter near a metallic split-ring resonator, which is embedded in a multilayered substrate incorporating a graphene layer. Analyzing photon decay rate in such a complex multilayered system is not only computationally challenging but also highly important to experimentally realizable devices. First, the dispersion relation of graphene plasmonics supported at a dieletric/graphene/dielectric structure is investigated systematically. Meanwhile, the dispersion relation of metallic plasmonics supported at a dielectric/metal structure is studied comparatively. According to our investigation, graphene offers several flexible tuning routes for manipulating photon decay rate, including tunable chemical potential and the emitter's position and polarization. Next, considering plasmonic waves in a graphene sheet occur in the infrared regime, we carefully design a metallic split ring resonating around the same frequency range. Consequently, this design enables a mutual interaction between graphene plasmonics and metallic plasmonics. The boundary element method with a multilayered medium Green's function is adopted in the numerical simulation. Blue-shifted and splitting resonance peaks are theoretically observed, which suggests a strong mode coupling. Moreover, the mode coupling has a switch on-off feature via electrostatically doping the graphene sheet. This work is helpful to dynamically manipulate photon decay rate in complex optical devices.
Wide Wavelength Tuning of Optical Antennas on Graphene with Nanosecond Response Time.

Yu Yao,Mikhail A. Kats,Raji Shankar,Yi Song,Jing Kong,Marko Loncar,Federico Capasso

DOI: https://doi.org/10.1021/nl403751p

IF: 10.8

2013-01-01

Nano Letters

Abstract:Graphene is emerging as a broadband optical material which can be dynamically tuned by electrostatic doping. However, the direct application of graphene sheets in optoelectronic devices is challenging due to graphene's small thickness and the resultant weak interaction with light. By combining metal and graphene in a hybrid plasmonic structure, it is possible to enhance graphene-light interaction and thus achieve in situ control of the optical response. We show that the effective mode index of the bonding plasmonic mode in metal-insulator-metal (MIM) waveguides is particularly sensitive to the change in the optical conductivity of a graphene layer in the gap. By incorporating such MIM structures in optic antenna designs, we demonstrate an electrically tunable coupled antenna array on graphene with a large tuning range (1100 nm, i.e., 250 cm(-1), nearly 20% of the resonance frequency) of the antenna resonance wavelength at the mid-infrared (MIR) region. Our device exhibits a 3 dB cutoff frequency of 30 MHz, which can be further increased into the gigahertz range. This study confirms that hybrid metal-graphene structures are promising elements for high-speed electrically controllable optical and optoelectronic devices.
Transmission Characteristics of A Plasmonic Bragg Reflector Based on A Metal-Embedded Slot Structure

Chao Xu,Hu Ting,Ruiyi Chen,Yu Ping,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1088/2040-8978/15/10/105005

IF: 2.1

2013-01-01

Journal of Optics

Abstract:A 3D plasmonic Bragg grating formed by a periodic arrangement of metal in a slot waveguide is proposed and investigated. The metal-embedded slot structure supports two different modes: the symmetric mode and the asymmetric mode. The symmetric mode is chosen to design a Bragg grating for long range propagation with compact modal size, and the Bragg grating demonstrates a wide stop-band (1520-1595 nm) with a 1 parts per thousand transmission of only 40 periods. Moreover, a defect is introduced into the Bragg grating. Simulated results show that with the tapered metal, this defect mode exhibits a narrow-band filtering effect of a relatively high Q-factor (Q = 454.7). The performance of the proposed structures is simulated by the finite-difference-time-domain method. In addition, by changing the polymer refractive index, this defect mode filtering effect can be reconfigured, which shows good potential for sensors and filters.
Bandwidth-tunable Optical Passband Filter Based on Graphene–silicon Waveguide

Shiqi Li,Weiwei Chen,Pengjun Wang,Qiang Fu,Jie Zhang,Bohao Zhang,Tingge Dai,Yuehai Wang,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2018.05.049

IF: 2.4

2018-01-01

Optics Communications

Abstract:A bandwidth-tunable optical passband filter based on graphene–silicon waveguide is proposed. The device is designed by utilizing a structure with four triple series-coupled microring resonators. By changing the Fermi level of graphene to lead to the variation of the modal effective index, the transmission spectra of triple series-coupled microring resonators can be coherently combined to provide the adjustable bandwidth as desired. A detailed analysis of the designed device is presented. Numerical simulations show that the effective bandwidth tuning range from 2.70 to 6.30 nm can be obtained when each microring resonator is independently controlled. With the maximum bandwidth tunability, the designed tunable filter has a minimum extinction ratio larger than 92.35 dB.
Tunable Plasmonic Nanolaser Based on Graphene

Jun Zhu,Zhengjie Xu,Cong Hu

DOI: https://doi.org/10.1007/s11468-018-0729-z

IF: 2.726

2018-01-01

Plasmonics

Abstract:Surface plasmon polariton nanolaser, which can achieve all-optical circuits and optoelectronic integration, is a major research area in nano-optics. We propose a novel tunable nanolaser that combines graphene and traditional metal–dielectric waveguide. We can tune the gain threshold and ejection frequency according to changes in the electronic characteristics of graphene and the structural parameters of the nanolaser. When the Fermi energy level is 0.8 eV, the Q-factor can reach 85, thereby indicating the outstanding performance of the nanolaser in manufacturing. We also found that the gain threshold will stop increasing when carrier mobility is increased to 2000 푐푚2/V∙s. Compared with the conventional silver strip structure, the proposed nanolaser exhibits better performance at h_gap = 0 nm. On that condition, the optimal values of propagation loss and the normalized mode area are 0.13 and 0.0001 dB/μm, respectively. The proposed nanolaser can overcome the challenges of high speed, miniaturization, and integration in optoelectronic integrated technology.
Electrical Tuning of Surface Plasmon Polariton Propagation in Graphene-Nanowire Hybrid Structure.

Haoliang Qian,Yaoguang Ma,Qing Yang,Bigeng Chen,Ying Liu,Xin Guo,Shisheng Lin,Jili Ruan,Xu Liu,Limin Tong,Zhong Lin Wang

DOI: https://doi.org/10.1021/nn406221s

IF: 17.1

2014-01-01

ACS Nano

Abstract:We demonstrate a dynamic surface plasmonic modulation based on graphene-nanowire (grapheme-NW) hybrid structures in the visible light range. A static modulation depth of as high as 0.07 dB/μm has been achieved experimentally. Through careful simulation and systematical experimental investigation, we found that the dual-confinement effect of charge density and electromagnetic energy around the vicinity of the NW will dramatically enhance the light-matter interaction and increase the Fermi level shifting, which are the key roles for bringing the optical response of the device to the visible range. The carrier concentration near the vicinity of a Ag NW is estimated to reach 0.921×10(14) cm(-2) after applying more than 25 V voltages, which is enough to shift the Fermi level for visible light. Furthermore, the modulation behaviors near the Dirac point of monolayer graphene and the singularity of gap-induced bilayer graphene are investigated. Calculated optical conductivity as a function of Fermi level predicts a minimum value near the Dirac point, which is consistent with the experimental results.
Design of a Tunable Absorber Based on Graphene in the THz Range

Song Wu,Dace Zha,Yun He,Liao Miao,Jianjun Jiang

DOI: https://doi.org/10.1109/compem.2019.8779138

2019-01-01

Abstract:This paper presents a tunable graphene-based absorber with near-unity absorption in terahertz range. The absorber is composed of the patterned graphene and a metallic reflecting plate spaced by a dielectric layer. The results show that the absorber's normalized bandwidth of 90% terahertz absorbance is over 86% under normal incidence for both TE and TM polarizations when the graphene chemical potential is set as 0.5 eV. The absorber also has the advantage of fexible tunability via electrostatic doping of the patterned graphene. By controlling the chemical potential from 0 eV to 0.6 eV, peak absorbance can be continuously tuned from 0% to 100%. The design scheme is scalable to develop various graphene-based tunable absorber at other terahertz, infrared, and visible frequencies, which may have promising applications in sensing, detecting, and optoelectronic devices.
Sense of Surface Plasmon Polarization Waveguide of Graphene

Jun Zhu,Frank Jiang,Qin Yunbai

DOI: https://doi.org/10.1007/s11468-019-00984-z

IF: 2.726

2019-01-01

Plasmonics

Abstract:The honey structure of graphene is used in telecommunications, flexible displays, photonic devices, batteries, and electronic devices, where it achieves high heat dissipation efficiency. In order to obtain the high performances in the field of waveguide and sensor, we proposed a tunable plasmonic waveguide sensor based on periodic grating. The proposed device not only has the outstanding waveguide performance in gain threshold and propagation loss, which can reach 0.00745 dB/nm and 501 cm−1, respectively, but also the temperature sensitivity can achieve 0.28 nm/°C. The performances of waveguide and sensor can be tuned by changing the electronic characteristics of graphene, the structural parameters, and temperature, which indicate that the proposed device has considerable potential in ultra-speed plasma sensor devices, photonic integrated circuits, and tunable optical devices.
Dynamic Control of Wideband Slow Wave in Graphene Based Waveguides

Ran Hao,JiaMin Jin,XiLiang Peng,Erping Li

DOI: https://doi.org/10.1364/ol.39.003094

IF: 3.6

2014-01-01

Optics Letters

Abstract:Enlarged group index has been reported previously when surface plasmons propagate through the graphene sheet, yet a clear slow wave performance in graphene has not been explored. We proposed and numerically analyzed here for the first time to the best of our knowledge an extremely wideband slow surface wave in a graphene-based grating waveguide. The strongly delayed wave (120Δf>0.7 THz) can be dynamically controlled via the gate-voltage dependent optical properties of graphene. Our results suggest that graphene may be a very promising slow light medium, promoting future slow light devices based on graphene.
A tunable wideband absorber based on periodic resistive patterned graphene

Dongke Zhu,Er-Ping Li

DOI: https://doi.org/10.1109/APMC.2015.7412948

2015-01-01

Abstract:A tunable wideband absorber based on periodic resistive patterned graphene operating in microwave regime is presented in this paper. The proposed absorber not only has wide absorption band but also can be tuned by changing the conductivity of graphene through external electric bias. At chemical potential of 0.3 eV, 90% absorbance can be achieved from 25.4 GHz to 93.9 GHz with 115% fractional bandwidth. But the working bandwidth becomes narrow when the chemical potential increases from 0.3 eV to 0.6 eV. Furthermore, increasing the size of the unit cell can scale the absorption band to a lower frequency.
Multifunctional and Tunable Trigate Graphene Metamaterial with "lakes of Wada" Topology.

Yang Liu,Xiaodan Xu,Donghao Yang,Xinzheng Zhang,Mengxin Ren,Nan Gong,Wei Cai,Faheem Hassan,Zhimao Zhu,Irena Drevensek-Olenik,Romano A. Rupp,Jingjun Xu

DOI: https://doi.org/10.1364/oe.398346

IF: 3.8

2020-01-01

Optics Express

Abstract:Many plasmon-induced transparency (PIT) metamaterials previously reported had limited functions. Their tunabilities were realized by complex discrete structures, which greatly increased the difficulty and cost of device fabrication and adversely affected their resonance characteristics. It is an open question to adjust the Fermi levels of many graphene patterns with only a few in-plane electrodes. We propose and numerically study a novel electrically tunable and multifunctional trigate graphene metamaterial (TGGM) based on the concept of "Lakes of Wada". Benefiting from the trigate regulation, our proposed TGGM turns out to exhibit excellent characteristics, that can not only be used for terahertz band-stop filter, terahertz refractive index sensor, near-field optical switch, slow-light device, but also for double PIT window metamaterial with broad transparency windows and large tunable frequency range.
A Tunable Thz Absorber Consisting Of An Elliptical Graphene Disk Array

Zengping Su,Yueke Wang,Xin Luo,Hao Luo,Chao Zhang,Mingxing Li,Tian Sang,Guofeng Yang

DOI: https://doi.org/10.1039/c8cp01649f

IF: 3.3

2018-01-01

Physical Chemistry Chemical Physics

Abstract:Herein, we present an adjustable absorber consisting of a periodically patterned elliptical graphene disk array, which absorbs in the THz region. When a circularly polarized light beam illuminates this structure, its absorption spectrum displays two absorption peaks, which originate from the F-P resonance of the fundamental graphene edge plasmon mode along the major and minor axes of the elliptical graphene disk. The position of these two absorption peaks can be modulated by changing the Fermi level of graphene. Furthermore, both absorption bands can merge into one broadband by changing the length of the major and minor axes. The full width at half maximum (FWHM) of the broadband can reach up to 3.52 THz. In addition, by changing the incident elliptically polarized light, the peak ratio between the two absorption bands can also be tuned to convert the double-band absorption to single-band absorption.
Electrically tunable graphene metamaterial with strong broadband absorption

Wei Yao,Linlong Tang,Jinpeng Nong,Jun Wang,Jun Yang,Yadong Jiang,Haofei Shi,Xingzhan Wei

DOI: https://doi.org/10.1088/1361-6528/abc44f

IF: 3.5

2020-11-24

Nanotechnology

Abstract:Abstract The coupling system with dynamic manipulation characteristics is of great importance for the field of active plasmonics and tunable metamaterials. However, the traditional metal-based architectures suffer from a lack of electrical tunability. In this study, a metamaterial composed of perpendicular or parallel graphene-Al 2 O 3 -graphene stacks is proposed and demonstrated, which allows for the electric modulation of both graphene layers simultaneously. The resultant absorption of hybridized modes can be modulated to more than 50% by applying an external voltage, and the absorption bandwidth can reach 3.55 μ m, which is 1.7 times enhanced than the counterpart of single-layer graphene. The modeling results demonstrate that the small relaxation time of graphene is of great importance to realize the broadband absorption. Moreover, the optical behaviors of the tunable metamaterial can be influenced by the incident polarization, the dielectric thickness, and especially by the Fermi energy of graphene. This work is of a crucial role in the design and fabrication of graphene-based broadband optical and optoelectronic devices.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Design of gate-tunable graphene electro-optical reflectors based on an optical slot-antenna coupled cavity

Tao Fang,Xiaoxue Gao,Xiaoxin Wang,Jifeng Liu

DOI: https://doi.org/10.1088/2515-7647/ac266a

2021-10-01

Journal of Physics: Photonics

Abstract:The unique properties of graphene offer an exciting opportunity towards tunable photonic surfacesfor flexible devices. In this paper, we design a gate-tunable, free-space graphene electro-opticalreflector based on cavity resonator structures. We firstly calculate the graphene refractive index nand k as a function of Fermi level and external gating voltage. Then, we designed the structure ofthe single-layer graphene reflective resonator by carefully selecting suitable materials and deviceparameters to maximize the reflectance differences before and after electro-optical tuning. We alsodeveloped a theoretical model to discuss this system based on the optical transition matrix method.Moreover, we used field enhancement to further increase the reflectance differences by incorporatingSn nanodots based optical slot-antenna coupled cavities. The maximum broadband, incident angleinsensitive reflectance differences could reach 28% with an extinction ratio of 1.62 d...
A Novel Tunable Absorber Based on Vertical Graphene Strips

Yi-Li Xu,Er-Ping Li,Xing-Chang Wei,Da Yi

DOI: https://doi.org/10.1109/lmwc.2015.2505610

IF: 3

2016-01-01

IEEE Microwave and Wireless Components Letters

Abstract:A novel type of graphene strips based three-dimensional absorber is proposed, which shows a dynamic tunability of absorbing band. The proposed structure is based on a two-dimensional array of vertical graphene strips with dielectric substrates beneath them. An absorption peak is obtained at the plasmon resonant frequency of the graphene strips. The relationship between the plasmon resonant frequency and the dimensions of absorber obeys the scaling law. Furthermore, by using the trapezoid graphene strips together with the hybrid electrostatic biases, the absorbing bandwidth can be improved significantly. In addition, the absorber shows a good stability with various incident angles and polarizations.
Broadband Gate-Tunable Terahertz Plasmons in Graphene Heterostructures

Baicheng Yao,Yuan Liu,Shu-Wei Huang,Chanyeol Choi,Zhenda Xie,Jaime Flor Flores,Yu Wu,Mingbin Yu,Dim-Lee Kwong,Yu Huang,Yunjiang Rao,Xiangfeng Duan,Chee Wei Wong

DOI: https://doi.org/10.1038/s41566-017-0054-7

IF: 35

2017-01-01

Nature Photonics

Abstract:Graphene, a unique two-dimensional material comprising carbon in a honeycomb lattice 1 , has brought breakthroughs across electronics, mechanics and thermal transport, driven by the quasiparticle Dirac fermions obeying a linear dispersion 2 , 3 . Here, we demonstrate a counter-pumped all-optical difference frequency process to coherently generate and control terahertz plasmons in atomic-layer graphene with octave-level tunability and high efficiency. We leverage the inherent surface asymmetry of graphene for strong second-order nonlinear polarizability 4 , 5 , which, together with tight plasmon field confinement, enables a robust difference frequency signal at terahertz frequencies. The counter-pumped resonant process on graphene uniquely achieves both energy and momentum conservation. Consequently, we demonstrate a dual-layer graphene heterostructure with terahertz charge- and gate-tunability over an octave, from 4.7 THz to 9.4 THz, bounded only by the pump amplifier optical bandwidth. Theoretical modelling supports our single-volt-level gate tuning and optical-bandwidth-bounded 4.7 THz phase-matching measurements through the random phase approximation, with phonon coupling, saturable absorption and below the Landau damping, to predict and understand graphene plasmon physics.
Tunable optical bistability in grapheme Tamm plasmon/Bragg reflector hybrid structure at terahertz frequencies

Shenping Wang,Jiao Xu,Hongxia Yuan,Huayue Zhang,Xin Long,Leyong Jiang,Jie Jiang

DOI: https://doi.org/10.48550/arXiv.2203.03143

2022-03-07

Abstract:We propose a composite multilayer structure consist of graphene Tamm plasmon and Bragg reflector with defect layer to realize the low threshold and tunable optical bistability (OB) at the terahertz frequencies. This low-threshold OB originates from the couple of the Tamm plasmon (TP) and the defect mode (DM). We discuss the influence of graphene and the DM on the hysteretic response of the TM-polarized reflected light. It is found that the switch-up and switch-down threshold required to observe the optical bistable behavior are lowered markedly due to the excitation of the TP and DM. Besides, the switching threshold value can be further reduced by coupling the TP and DM. We believe these results will provide a new avenue for realizing the low threshold and tunable optical bistable devices and other nonlinear optical devices.

Optics
Broadband Tunable THz Absorption with Singular Graphene Metasurfaces

Emanuele Galiffi,John Pendry,Paloma Arroyo Huidobro

DOI: https://doi.org/10.48550/arXiv.1810.10467

2018-10-24

Mesoscale and Nanoscale Physics

Abstract:By exploiting singular spatial modulations of the graphene conductivity, we design a broadband, tunable THz absorber whose efficiency approaches the theoretical upper bound for a wide absorption band with a fractional bandwidth of 185\%. Strong field enhancement is exhibited by the modes of this extended structure, which is able to excite a wealth of high order surface plasmons, enabling deeply subwavelength focussing of incident THz radiation. Previous studies have shown that the conductivity can be modulated at GHz frequencies, which might lead to the development of efficient high speed broadband switching by an atomically thin layer.

Graphene-based Tunable Plasmonic Bragg Reflector with a Broad Bandwidth

Tunable multiple channeled phenomena in graphene-based plasmonic Bragg reflectors

Tunable Slow Wave Waveguides Based on Graphene

Graphene Plasmonics for Tuning Photon Decay Rate Near Metallic Split-Ring Resonator in a Multilayered Substrate.

Wide Wavelength Tuning of Optical Antennas on Graphene with Nanosecond Response Time.

Transmission Characteristics of A Plasmonic Bragg Reflector Based on A Metal-Embedded Slot Structure

Bandwidth-tunable Optical Passband Filter Based on Graphene–silicon Waveguide

Tunable Plasmonic Nanolaser Based on Graphene

Electrical Tuning of Surface Plasmon Polariton Propagation in Graphene-Nanowire Hybrid Structure.

Design of a Tunable Absorber Based on Graphene in the THz Range

Sense of Surface Plasmon Polarization Waveguide of Graphene

Dynamic Control of Wideband Slow Wave in Graphene Based Waveguides

A tunable wideband absorber based on periodic resistive patterned graphene

Multifunctional and Tunable Trigate Graphene Metamaterial with "lakes of Wada" Topology.

A Tunable Thz Absorber Consisting Of An Elliptical Graphene Disk Array

Electrically tunable graphene metamaterial with strong broadband absorption

Design of gate-tunable graphene electro-optical reflectors based on an optical slot-antenna coupled cavity

A Novel Tunable Absorber Based on Vertical Graphene Strips

Broadband Gate-Tunable Terahertz Plasmons in Graphene Heterostructures

Tunable optical bistability in grapheme Tamm plasmon/Bragg reflector hybrid structure at terahertz frequencies

Broadband Tunable THz Absorption with Singular Graphene Metasurfaces