Abstract:Currently, there is great demand for automated assembly of equipment inside spacecraft module, which would require an assembly robot with small size, large workspace, high load capacity, and high flexibility. To meet this demand, a redundant seven-degree-of-freedom (7-DOF) assembly robot with three prismatic joints and four rotating joints is proposed in this study. First, a kinematic model of the assembly robot is established, and the positional forward kinematics are derived. Then, the positional inverse kinematic equations are derived by using the fixed joint method and the coordinate inverse transformation method for the characteristics of the robot with redundant degrees of freedom. The inverse solution optimization model of the assembly robot is designed based on genetic algorithm, and B-spline interpolation algorithm is used for joint trajectory planning. Next, NSGA-2 algorithm is used to construct the trajectory optimization model, and the time-pulsation multi-objective Pareto optimal frontier is obtained. Finally, the joint simulation model of mechatronics and the prototype experiment are established to verify the effectiveness of the optimization results. Analysis shows that the proposed assembly robot has better load-bearing capacity and dynamic characteristics than similar existing assembly robots. Furthermore, the segmented trajectory optimization strategy for the assembly robot using inverse solution optimization, interpolation algorithm, and NSGA-2 based multi-objective optimization gets each motion joint to realize the trajectory tracking function quickly and stably, and the trajectory tracking error is small enough to meet the requirements of end positioning accuracy.

The modular robot joint design and experience verification for small openings and enclosed space

Modular Industrial Robot Based on Joint Modular

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

Design and Experiments of a Robotic Arm with a Rigid-Soft Coupling Structure

Design of a High-torque Robot Joint and Its Control System

The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Dual-arm robot modular joint design and error analysis

Design and Modularization of Multi-DoF Soft Robotic Actuators

In Situ Reconfiguration of Assembling Pattern for Modular Continuum Robots

Design and Research of a Novel Fast Connecting and Separating Modular Space Manipulator

Design and Analysis of a Novel Variable Stiffness Joint for Robot

Design and Kinematics of a Novel Continuum Robot Connected by Unique Offset Cross Revolute Joints

Design and motion planning of a 7-DOF assembly robot with heavy load in spacecraft module

Robot Design Optimization with Rotational and Prismatic Joints using Black-Box Multi-Objective Optimization

Task-oriented Hierarchical Control of Modular Soft Robots with External Vision Guidance

Kinematic Modeling and Simulation of a New Robot for Wingbox Internal Fastening Application

Research on a Biomimetic Flexible Ball Joint With Variable Stiffness for Robots

Research and Simulation of Modular Robot Arm Kinematics

Creating a flexible continuum robot using origami and mortise-tenon structure

Analysis of Rigid-Flexible Coupling Characteristics of Pneumatic Modular Soft Joints with Variable Stiffness

A nine-degree-of-freedom modular redundant robotic manipulator: Development and experimentation