Abstract:Currently, there is great demand for automated assembly of equipment inside spacecraft module, which would require an assembly robot with small size, large workspace, high load capacity, and high flexibility. To meet this demand, a redundant seven-degree-of-freedom (7-DOF) assembly robot with three prismatic joints and four rotating joints is proposed in this study. First, a kinematic model of the assembly robot is established, and the positional forward kinematics are derived. Then, the positional inverse kinematic equations are derived by using the fixed joint method and the coordinate inverse transformation method for the characteristics of the robot with redundant degrees of freedom. The inverse solution optimization model of the assembly robot is designed based on genetic algorithm, and B-spline interpolation algorithm is used for joint trajectory planning. Next, NSGA-2 algorithm is used to construct the trajectory optimization model, and the time-pulsation multi-objective Pareto optimal frontier is obtained. Finally, the joint simulation model of mechatronics and the prototype experiment are established to verify the effectiveness of the optimization results. Analysis shows that the proposed assembly robot has better load-bearing capacity and dynamic characteristics than similar existing assembly robots. Furthermore, the segmented trajectory optimization strategy for the assembly robot using inverse solution optimization, interpolation algorithm, and NSGA-2 based multi-objective optimization gets each motion joint to realize the trajectory tracking function quickly and stably, and the trajectory tracking error is small enough to meet the requirements of end positioning accuracy.

Dual-arm robot modular joint design and error analysis

Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

Development of A Novel Dual-arm Robot via Modular Actuator

The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Design and Development of the Dual-Arm Robot DARO

A nine-degree-of-freedom modular redundant robotic manipulator: Development and experimentation

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Structure design and kinematic analysis of dual arm robot

Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

Research on kinematics simulation and testing of the modular dual-arm cooperative robot

Research and Simulation of Modular Robot Arm Kinematics

A unified dynamic control method for a redundant dual arm robot

The Design of Decoupled Robotic Arm Based on Chain Transmission

Experimental Investigation into the Coordinated Manipulation of a Dual-arm Modular Robot

Design of an anthropomorphic dual-arm robot with biologically inspired 8-DOF arms

Design and motion planning of a 7-DOF assembly robot with heavy load in spacecraft module

Assembly Strategy for Modular Components Using a Dual-Arm Space Robot with Flexible Appendages

Optimizing Robot Arm Reaching Ability with Different Joints Functionality

An Efficient Kinematic Calibration Method for Parallel Robots With Compact Multi-Degrees-of-Freedom Joint Models

Modeling and Analysis of the Multiple Dynamic Coupling Effects of a Dual-arm Space Robotic System