Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Adaptive tracking control for a new mobile manipulator model

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Variable Force Tracking Control Via Online Learning

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Robust adaptive wavelet network control for robot manipulators

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Vision-based Adaptive Tracking Control of Uncertain Nonholonomic Mobile Robots

Adaptive Control of Robotic Manipulators with Unified Motion Constraints

Adaptive PID Control of Robot Manipulators with H_∞ Tracking Performance

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Model-free Adaptive Trajectory Tracking Control of Robotic Manipulators with Practical Prescribed-Time Performance

Model Predictive Control For Mobile Manipulators Based On Neural Dynamics(Extended version)

Study on nonholonomic mobile manipulators trajectory tracking and the robustness

Adaptive neural network control of robotic manipulators with input constraints and without velocity measurements

Adaptive trajectory tracking control of robotic manipulators based on integral sliding mode

Trajectory Tracking Control of Mobile Manipulator Based on Improved Sliding Mode Control Algorithm

Symmetrical adaptive variable admittance control for position/force tracking of dual-arm cooperative manipulators with unknown trajectory deviations