Abstract:Imaging algorithms recently developed in ultrasonic nondestructive testing (NDT) have shown good potential for defect characterization. Many of them are based on the concept of collecting the full matrix of data, obtained by firing each element of an ultrasonic phased array independently, while collecting the data with all elements. Because of the finite sound velocity in the test structure, 2 consecutive firings must be separated by a minimum time interval. Depending on the number of elements in a given array, this may become problematic if data must be collected within a short time, as it is often the case, for example, in an industrial context. An obvious way to decrease the duration of data capture is to use a sparse transmit aperture, in which only a restricted number of elements are used to transmit ultrasonic waves. This paper compares 2 approaches aimed at producing an image on the basis of restricted data: the common source method and the effective aperture technique. The effective aperture technique is based on the far-field approximation, and no similar approach exists for the near-field. This paper investigates the performance of this technique in near-field conditions, where most NDT applications are made. First, these methods are described and their point spread functions are compared with that of the Total Focusing Method (TFM), which consists of focusing the array at every point in the image. Then, a map of efficiency is given for the different algorithms in the near-field. The map can be used to select the most appropriate algorithm. Finally, this map is validated by testing the different algorithms on experimental data.

The efficiency optimization of full matrix capture imaging detection based on increasing the effective aperture

A Modified Wavenumber Algorithm of Multi-Layered Structures with Oblique Incidence Based on Full-Matrix Capture

Ultrasonic Array Imaging of Multilayer Structures Using Full Matrix Capture and Extended Phase Shift Migration

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

An Aerial Focusing Method Based On Focusing Window Selection And Variable Threshold Focusing Evaluation Function In Frequency Domain

Frequency-domain Synthetic Aperture Focusing for Helical Ultrasonic Imaging

Synthetic Aperture Imaging for Multilayer Cylindrical Object Using an Exterior Rotating Transducer.

Adaptive Total Focusing Method for Ultrasonic Full-Matrix Imaging of Anisotropic CFRP Laminates

Optimization for Imaging Through Scattering Media for Confocal Microscopes with Divided Elliptical Apertures.

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Efficiency Improvement of Total Focusing Imaging Based on Sparse Array Method

Multiwave Total Focusing Method for Full-Matrix Imaging Using Ultrasonic Phased Array

An optimized total focusing method based on delay-multiply-and-sum for nondestructive testing

Ultrasonic Array F-SAFT Imaging Method with PSM

An efficient ultrasonic full-matrix imaging method for industrial curved-surface components defect detection

Sequential Dynamic Aperture Focusing Strategy for Transmissive Ultrasonic Phase Array Tomography

Ultrasonic imaging algorithms with limited transmission cycles for rapid nondestructive evaluation

An electromagnetic ultrasonic synthetic aperture focusing imaging method based on wave packet decomposition optimisation to eliminate artefacts

Compressed Sensing for Full Matrix Capture Data Based on Optimal Reconstruction Algorithm

Total Focusing Method for Ultrasonic Non-Destructive Inspection of Homogenous Objects Based on Elliptical Arc Scan-Conversion

Efficient phase shift migration for ultrasonic full-matrix imaging of multilayer composite structures