Ultrasonic Wave Sensor Based on Phase-Shift Fiber Bragg Grating for Seismic Physical Models

Jingjing Guo,Changxi Yang

2014-01-01

Abstract:Ultrasonic wave sensor based on phase-shift fiber Bragg Grating (PS-FBG) is presented to image layered structure of seismic physical models. Comparison to traditional PZT sensor, PS-FBG shows high sensitivity, large dynamic range and broadband response.

What problem does this paper attempt to address?

Ultrasonic imaging of seismic physical models using a phase-shifted fiber Bragg grating.

Jingjing Guo,Shigui Xue,Qun Zhao,Changxi Yang

DOI: https://doi.org/10.1364/OE.22.019573

IF: 3.8

2014-01-01

Optics Express

Abstract:We report what is to our knowledge the first ultrasonic imaging of seismic physical models by using a phase-shifted fiber Bragg grating (PS-FBG). Seismic models, which consist of multiple layer structures, were immersed in water. Piezoelectric (PZT) transducer was used to generate ultrasonic waves and a PS-FBG as a receiver. Two-dimensional (2D) ultrasonic images were reconstructed by scanning the PS-FBG with a high-precision position scanning device. In order to suppress the low-frequency drift of the Bragg wavelength during scanning, a tight wavelength tracking method was employed to lock the laser to the PS-FBG resonance in its reflection bandgap. The ultrasonic images captured by the PS-FBG have been compared with the images obtained by the geophysical imaging system, Sinopec, demonstrating the feasibility of our PS-FBG based imaging system in seismic modeling studies. (C) 2014 Optical Society of America
Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Guanghui Wang,Perry Ping Shum,Ho-pui Ho,Xia Yu,Dora Juan Juan Hu,Ying Cui,Limin Tong,Chinlon Lin

DOI: https://doi.org/10.1364/OE.19.008930

IF: 3.8

2011-01-01

Optics Express

Abstract:We report a novel micro-fiber Bragg grating (mu FBG) sensor that takes advantage of the degeneracy of stop-band and rapid emergence of spectral modes when an effective phase shift occurs. The phase shift can be enabled by a range of perturbations in a central segment of the grating, including monolayer immobilization of bio-molecules or change in refractive index in the surrounding, thereby constituting the possibility of a highly sensitive sensor with the merit of scalable performance. The use of mu FBG ensures strong evanescent field coupling to the surrounding in order to maximize signal transduction. Simulation results indicate very favorable sensor signal characteristics such as large wavelength shift and sharp reflection dips. A general relation between the peak position within the stop-band and the amount of effective phase shift is also provided, and may generally serve as helpful guideline for FBG sensor design. A typical mu FBG sensor device may detect surface protein/DNA adsorption with limit-of-detection (LOD) as low as 3.3 pg.mm(-2) for surface mass density and 51.8 fg for total mass. For refractive index (RI) sensing, the LOD is 2.5*10(-6) refractive index unit (RIU). (C) 2011 Optical Society of America
Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Pengcheng Jiao,Yiwei Xie,Shengnan Wu,Xinyu Liu

DOI: https://doi.org/10.3390/ma13112599

IF: 3.4

2020-01-01

Materials

Abstract:Structural health monitoring (SHM) has been extensively used in civil infrastructures to assess structural condition and situation. Here, we develop a novel type of mechanical sensing technique using the structural instability of cylindrical cells detected by fiber Bragg grating (FBG). The cylinders are fabricated using a 3D printing technique, which are coiled by the FBG wires to detect the transverse deformation. Structural instability under axial compression is obtained in the experiments and the force-displacement relations are validated by the numerical simulations with satisfactory agreements. The wavelength variation of the FBG, caused by the structural instability, is observed and compared with the predefined threshold. Defining the variation larger than the threshold as "1" and smaller as "0", the pattern recognition algorithm is used to convert the FBG results into binary data, which can, therefore, be analyzed to indicate the structural conditions. In the end, we envision the potential applications of the reported sensing technique, such as wireless sensors for structural health monitoring (SHM) in civil infrastructures.
Ultrasonic optical fiber sensing for composite structural health monitoring

Qi Wu,Rong Wang,Wulin Lan,Hanqi Zhang,Hongzhou Zhai

DOI: https://doi.org/10.1117/12.2602299

2021-10-09

Abstract:Fiber Bragg grating has been widely used as a sensor for detecting static quantities such as strain and temperature, but it is still difficult to detect ultrasonic guided waves due to the limitation of sensitivity and bandwidth. By comparing the traditional fiber Bragg grating and the phase-shifted fiber Bragg grating (PSFBG), it was found that the latter has a shorter and effective grating length and steeper slope. Thus, the PSFBG can greatly improve bandwidth and sensitivity, which is suitable for the detection of ultrasonic Lamb waves. Furthermore, a high-speed demodulator and a feedback controller were designed and integrated with the PSFBG to reduce the noise and enhance the robustness of the sensing system. The excellent performance of the PSFBG-based system is demonstrated in linear and nonlinear acousto-ultrasonic detection, and acoustic emission detection, by comparing with the PZT sensors.
Highly Stabilized Phase-Shifted Fiber Bragg Grating Sensing System for Ultrasonic Detection

Jingjing Guo,Changxi Yang

DOI: https://doi.org/10.1109/LPT.2015.2396530

2015-01-01

Abstract:A phase-shifted fiber Bragg grating (PS-FBG) sensing system based on Pound–Drever–Hall (PDH) technique is proposed and experimentally demonstrated for ultrasonic detection. The sensing system is highly stabilized as the laser is frequency locked to the PS-FBG resonance using PDH technique. This scheme reduces the effect of laser intensity noise and enables high-sensitivity ultrasonic detection by monitoring the error signal of frequency detuning between the laser and the PS-FBG resonance. Response of the frequency-locked PS-FBG to ultrasound is done by testing the ultrasonic refection of a 0.4-mm plastic film, immersed in water. The sensor exhibits a high signal-to-noise ratio of 48 dB at 200 kHz and a noise-limited detectable strain of 8.7 above 10 kHz. Frequency response of PS-FBG from 100 kHz to 1 MHz was also characterized.
Advanced suspended-core fiber sensor for seismic physical modeling

Zhihua Shao,Kuangyu Zhou,Huanhuan Yin,Xi Yang,Xueguang Qiao

DOI: https://doi.org/10.1364/OE.456840

2022-05-09

Abstract:A micro ultrasonic sensor based on an advanced suspended-core fiber is proposed and employed for in-lab seismic physical modeling. A free suspended core is obtained by acid corrosion and two cascaded uniform fiber Bragg gratings (FBGs) are imprinted in the suspended-core fiber. The sensor response and stability are largely improved due to the using of dual-FBG reflectors instead of weak-reflection fiber mirrors for constructing an in-fiber interferometer. The characteristics of reflection spectra and ultrasonic response of the sensor are analyzed and demonstrated experimentally. Comparative measurements are also carried out to prove the sensor superiority over the conventional weak-reflection one. Moreover, the sensor is used for seismic physical modeling to show its ability of practicable usage. Both the crosswell seismic and surface seismic in seismic exploration are modeled respectively based on reservoir and fault models. Various reservoir velocities are measured and each is consistent with the reported results. The fault features are also well reconstructed in the form of a cross-section model image. The improved sensor approach greatly promotes the application of the suspended-core fiber for weak acoustic detection in seismic physical modeling.
High-sensitivity Ultrasound Detection Based on Phase-Shifted Fiber Bragg Grating

Mingrui Xu,Jingjing Guo,Changxi Yang

DOI: https://doi.org/10.2991/isca-13.2013.25

2013-01-01

Abstract:Fiber Bragg grating based ultrasound sensors has been receiving continuous attention from science and industry. It is of great potential in medical imaging, oil exploration, etc. In this paper, we construct an all fiber ultrasound sensing system with cascaded phase-shifted FBG and a normal FBG. Correlation algorithm is used to improve the detection sensitivity based on data acquisition board and virtual instrument LabVIEW. In the experiment, the system sensitivity is calculated as 9n epsilon / root Hz and the dynamic range of the system is 79.33dB.
Ultrasonic Structural Health Monitoring Using Fiber Bragg Grating

Qi Wu,Yoji Okabe,Fengming Yu

DOI: https://doi.org/10.3390/s18103395

IF: 3.9

2018-10-11

Sensors

Abstract:The fiber Bragg grating (FBG) sensor, which was developed over recent decades, has been widely used to measure manifold static measurands in a variety of industrial sectors. Multiple experiments have demonstrated its ability in ultrasonic detection and its potential in ultrasonic structural health monitoring. Unlike static measurements, ultrasonic detection requires a higher sensitivity and broader bandwidth to ensure the fidelity of the ultrasonic Lamb wave that propagates in a plate-like structure for the subsequent waveform analysis. Thus, the FBG sensor head and its corresponding demodulation system need to be carefully designed, and other practical issues, such as the installation methods and data process methods, should also be properly addressed. In this review, the mature techniques of FBG-based ultrasonic sensors and their practical applications in ultrasonic structural health monitoring are discussed. In addition, state-of-the-art techniques are introduced to fully present the current developments.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

Shengye Huang,Xiaofeng Jin,Jun Zhang,Yi Chen,Yuebin Wang,Zhijun Zhou,Juan Ni

DOI: https://doi.org/10.1007/s13320-011-0023-6

IF: 2.814

2011-01-01

Photonic Sensors

Abstract:An optical fiber hydrophone based on equivalent phase shift fiber Bragg grating (EPS-FBG) with temperature compensation package provides an improvement of sensitivity in underwater acoustic measurement at wide frequency range, from 2.5 kHz to 12 kHz. The acoustic pressure is transduced into elastic vibration of a circle metal disk, resulting in an intensity modulation of the reflected light wave back from fiber Bragg grating (FBG). Experiment shows that the packaged EPS-FBG hydrophone has a minimum detectable acoustic pressure of about 500 at 5 kHz and achieves about 18-dB improvement of acoustic pressure sensitivity compared with a regular apodized FBG hydrophone.
Recent Advancement of Phase Shifted Fiber Bragg Grating Sensor for Ultrasonic Wave Application: A Review

Sanjeev Kumar Raghuwanshi,Santosh Kumar,Md. Danish Nadeem

DOI: https://doi.org/10.1109/jsen.2022.3158090

IF: 4.3

2022-04-15

IEEE Sensors Journal

Abstract:Fiber Bragg grating (FBG) is gaining traction in the field of optical fiber sensors, either as a detection tool for ultrasonic waves or as a detection target. The significant contributions of the last few years are summarized in this overview, that includes setups based on wavelength and intensity. This article summarizes recent research and development activities in ultrasonic wave applications utilizing FBG sensors and makes recommendations for future research. Several different FBG strain sensor packing configurations are discussed. This article presents a comprehensive theoretical and mathematical analysis of a phase-shifted fiber Bragg grating ( <span class="mjpage"><svg xmlns:xlink="http://www.w3.org/1999/xlink" width="2.061ex" height="2.509ex" style="vertical-align: -0.671ex; margin-left: -0.089ex;" viewBox="-38.5 -791.3 887.5 1080.4" role="img" focusable="false" xmlns="http://www.w3.org/2000/svg"><g stroke="currentColor" fill="currentColor" stroke-width="0" transform="matrix(1 0 0 -1 0 0)"> <use xlink:href="#MJMATHI-70" x="0" y="0"></use> <use xlink:href="#MJMATHI-69" x="503" y="0"></use></g></svg></span> -PS-FBG) for use in a structural health monitoring system that employs a longitudinal ultrasonic strain wave obtained via a natural single FBG. The effect of grating regulating factors (grating length, index change, and apodization), as well as ultrasonic acoustic wavelengths, on the <span class="mjpage"><svg xmlns:xlink="http://www.w3.org/1999/xlink" width="2.061ex" height="2.509ex" style="vertical-align: -0.671ex; margin-left: -0.089ex;" viewBox="-38.5 -791.3 887.5 1080.4" role="img" focusable="false" xmlns="http://www.w3.org/2000/svg"><g stroke="currentColor" fill="currentColor" stroke-width="0" transform="matrix(1 0 0 -1 0 0)"> <use xlink:href="#MJMATHI-70" x="0" y="0"></use> <use xlink:href="#MJMATHI-69" x="503" y="0"></use></g></svg></span> -PS-FBG's wavelength shift sensitivity have been investigated. Additionally, the slow-light effect in the <span class="mjpage"><svg xmlns:xlink="http://www.w3.org/1999/xlink" width="2.061ex" height="2.509ex" style="vertical-align: -0.671ex; margin-left: -0.089ex;" viewBox="-38.5 -791.3 887.5 1080.4" role="img" focusable="false" xmlns="http://www.w3.org/2000/svg"><g stroke="currentColor" fill="currentColor" stroke-width="0" transform="matrix(1 0 0 -1 0 0)"> <use xlink:href="#MJMATHI-70" x="0" y="0"></use> <use xlink:href="#MJMATHI-69" x="503" y="0"></use></g></svg></span> -PS-FBG acoustic sensor was investigated. Sensitivity, detection range, and limit of detection are all thoroughly examined and discussed with the objective of comparing various technologies and determining future directions in the field of phase shifted fiber optic sensors.<svg xmlns="http://www.w3.org/2000/svg" style="display: none;"><defs id="MathJax_SVG_glyphs"><path stroke-width="1" id="MJMATHI-70" d="M23 287Q24 290 25 295T30 317T40 348T55 381T75 411T101 433T134 442Q209 442 230 378L240 387Q302 442 358 442Q423 442 460 395T497 281Q497 173 421 82T249 -10Q227 -10 210 -4Q199 1 187 11T168 28L161 36Q160 35 139 -51T118 -138Q118 -144 126 -145T163 -148H188Q194 -155 194 -157T191 -175Q188 -187 185 -190T172 -194Q170 -194 161 -194T127 -193T65 -192Q-5 -192 -24 -194H-32Q-39 -187 -39 -183Q-37 -156 -26 -148H-6Q28 -147 33 -136Q36 -130 94 103T155 350Q156 355 156 364Q156 405 131 405Q109 405 94 377T71 316T59 280Q57 278 43 278H29Q23 284 23 287ZM178 102Q200 26 252 26Q282 26 310 49T356 107Q374 141 392 215T411 325V331Q411 405 350 405Q339 405 328 402T306 393T286 380T269 365T254 350T243 336T235 326L232 322Q232 321 229 308T218 264T204 212Q178 106 178 102Z"></path><path stroke-width="1" id="MJMATHI-69" d="M184 600Q184 624 203 642T247 661Q265 661 277 649T290 619Q290 596 270 577T226 557Q211 557 198 567T184 600ZM21 287Q21 295 30 318T54 369T98 420T158 442Q197 442 223 419T250 357Q250 340 236 301T196 196T154 83Q149 61 149 51Q149 26 166 26Q175 26 185 29T208 43T235 78T260 137Q263 149 265 151T282 153Q302 153 302 143Q302 135 293 112T268 61T223 11T161 -11Q129 -11 102 10T74 74Q74 91 79 106T122 220Q160 321 166 341T173 380Q173 404 156 404H154Q124 404 99 371T61 287Q60 286 59 284T58 281T56 279T53 278T49 278T41 278H27Q21 284 21 287Z"></path></defs></svg>

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Fiber Grating Sensor Using Dynamic PZT Modulation

Qiang Li

2002-01-01

Abstract:A new type technology of dynamic PZT modulation with fiber grating is proposed. It can change measure of wvelength shift with optical spectrum analyzes to count of optical power pulse detecting by oscilloscope. The technology is investigated theoretically and experimentally. The PZT is modulated by periodicity voltage and the fiber grating fixing on the it is also modulated by PZT. The measured resolutions in experiment are good agreement with ones in theory.
Detection of Focused Ultrasonic Fields with Fiber Bragg Grating

Qian-chun WANG,Xian-feng YE,Yong-liang CAO,Li-yuan ZHAN

DOI: https://doi.org/10.3969/j.issn.1004-1699.2005.01.044

2005-01-01

Abstract:A simple but effective system of detecting focused ultrasonic field parameters using transmission model of Fiber Bragg Grating is presented. The detected signal of the system is deduced and analysed theoretically. The comparison of frequency spectrum between PZT and FBG in the focused point is taken experimentally. The beam profile of immersed and focused ultrasound piezoelectric transducer is constructed in the focal plane. Experimental results illustrate that the peak voltage of FBG hydrophone output is proportional to input voltage to transducer. The interrogation scheme allows ultrasound detection with wide dynamic range, high resolution strain and high speed.
A Laser-Based Fiber Bragg Grating Ultrasonic Sensing System for Structural Health Monitoring

Yang Zhao,Yinian Zhu,Maodan Yuan,Junfang Wang,Songye Zhu

DOI: https://doi.org/10.1109/lpt.2016.2605699

IF: 2.6

2016-11-15

IEEE Photonics Technology Letters

Abstract:Fiber Bragg gratings (FBGs) have being seen for a growing application in the field of structural health monitoring (SHM) because of their lightweight features. This letter introduces an adaptive SHM sensing system based on the ultrasonic guided wave (UGW) and FBG sensor technology. First, the capability of the proposed SHM sensing system used to detect UGW is demonstrated by the frequency detection of Rayleigh wave that is generated by the piezoelectric transducers with a function generator. Furthermore, a nanosecond pulse laser is utilized to generate Lamb wave on an aluminum plate, while the SHM sensing system is employed to detect the wave in a long distance. Finally, the SHM sensing system is used to locate the source of Rayleigh wave that is created by a pulsed laser. The experiment results show the proposed SHM sensing system is capable of localizing and monitoring the UGW by using four FBG cascaded on a loaded aluminum plate.

engineering, electrical & electronic,optics,physics, applied
Ultrasonic Frequency Response of Surface Attached Fiber Bragg Grating

Zhuoxuan Li,Li Pei,Bo Dong,Cheng Ma,Anbo Wang

DOI: https://doi.org/10.1117/12.966348

2012-01-01

Abstract:The spectrum shift of FBG to ultrasonic wave is caused by the refractive index profile changing along the FBG, which can be attributed to nonuniform perturbation caused by strain-optic and geometric effects of ultrasonic wave. Response of FBG to the above two effects was analyzed by V-I transmission matrix model, showing high computing efficiency. Spectra response of FBG under changing ultrasonic frequencies was simulated and discussed. In experiment, the system was sensitive enough to detect ultrasonic wave from 15 kHz to 1380 kHz. These results would provide a guideline for FBG-based acoustic detection system design in a specific ultrasonic frequency.
Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

姜暖,杨华勇,尹俊,胡永明

DOI: https://doi.org/10.3321/j.issn:1005-0086.2008.12.007

2008-01-01

Abstract:The principle to enhance the pressure sensing and sensitivity on fiber Bragg grating(FBG) is analyzed.A packaging structure which is suitable for high-sensitivity hydrostatic pressure sensing is designed.The experimental results show that the pressure sensitivity of this FBG sensor is 9.03×10-3 MPa-1,which is 2946 times of that of the bare-fiber grating sensor.In Changsha Bailu Lake,an experiment of water-depth measurement based on this FBG pressure sensor was finished.Results show that the deep measuring resolution of this sensor can be 5 cm at least,also with wonderful linearity and repeatability.This kind of FBG sensor can satisfy the measuring and controlling reguirement of towed fiber cable.
Adaptive ultrasonic sensor using a fiber ring laser with tandem fiber Bragg gratings

Tongqing Liu,Lingling Hu,Ming Han

DOI: https://doi.org/10.1364/OL.39.004462

2014-08-01

Abstract:We propose and demonstrate an intensity-demodulated fiber-optic ultrasonic sensor system that can be self-adaptive to large quasi-static background strain perturbations. The sensor system is based on a fiber ring laser (FRL) whose laser cavity includes a pair of fiber Bragg gratings (FBGs). Self-adaptive ultrasonic detection is achieved by a tandem design where the two FBGs are engineered to have differential spectral responses to ultrasonic waves and are installed side-by-side at the same location on a structure. As a result, ultrasonic waves lead to relative spectral shifts of the FBGs and modulations to the cold-cavity loss of the FRL. Ultrasonic waves can then be detected directly from the laser intensity variations in response to the cold-cavity loss modulation. The sensor system is insensitive to quasi-static background strains because they lead to identical responses of the tandem FBGs. Based on the principle, a FRL sensor system was demonstrated and tested for adaptive ultrasonic detection when large static strains as well as dynamic sinusoidal vibrations were applied to the sensor.
Research on Ultrasonic Hydrophone Based on Polarization Properties of FBG

Su Yang,Zhang Baofu,Zhou Hua,Zhu Yong,Wang Feng

DOI: https://doi.org/10.1117/12.2036930

2013-01-01

Abstract:We demonstrate a novel fiber-optic hydrophone that use a fiber Bragg grating (FBG) as a sensing element. The operation principle is based on the modulation of birefringence of the FBG by high-frequency ultrasound. By measuring the amplitude of the first Stokes parameters of the transmitted light in FBG using a in line polarimeter, the amplitude and frequency of acoustic pressure can be determined. The FBG hydrophone has a linear response to acoustic pressure, and the sensitivity and dynamic range of the sensor are studied.
Three-Dimensional Low-Frequency Earthquake Monitoring Vibration Sensor Based on FBG

Zhongchao Qiu,Yufeng Zhang

DOI: https://doi.org/10.1109/tim.2024.3406839

IF: 5.6

2024-06-15

IEEE Transactions on Instrumentation and Measurement

Abstract:Fiber Bragg grating (FBG) vibration sensors exhibit promising application prospects in complex environmental fields such as earthquake, tsunami, and coal mine vibration monitoring. In response to the challenge of effectively capturing low-frequency vibration signals using existing FBG sensors, this study proposes a specialized 3-D low-frequency FBG vibration sensor designed for earthquake monitoring. Initially, the study established a composite elastic structural model of cross reeds and cantilever beam elastomers to pick up low-frequency signals effectively. Subsequently, this study utilizes a differential evolution genetic algorithm to achieve global results under multiple constraints of composite structures. Finally, the research involves processing and packaging the sensor to ensure sensor stability. The experimental outcomes reveal that the sensor maintains a stable range between 0.1 and 20 Hz, exhibiting a minimum detectable frequency of 0.01 Hz and a sensitivity of 606.2 pm/g. The sensor achieves a transverse sensitivity ratio of 2.3%, with a dynamic resolution exceeding 0.173 mg/Hz within the stable range and a dynamic range of 81.9 dB, exhibiting satisfactory sensitivity and precise angular characterization. The sensor has excellent temperature compensation and creep resistance. The insights derived from this research offer substantial promise for advancing low-frequency vibration monitoring in various complex environmental contexts.

engineering, electrical & electronic,instruments & instrumentation
D-Shaped Fiber Bragg Grating Ultrasonic Hydrophone With Enhanced Sensitivity and Bandwidth

Cheng Li,Xiaobin Peng,Jian Liu,Chao Wang,Shangchun Fan,Shaoqing Cao

DOI: https://doi.org/10.1109/jlt.2019.2898233

IF: 4.7

2019-05-01

Journal of Lightwave Technology

Abstract:In this paper, we demonstrate a miniature flexible FBG-based underwater ultrasonic sensor with enhanced pressure sensitivity and bandwidth using a side-polished configuration of ~54 μm depth and ~15 mm length. The opto-mechanical responses of the sensor to acoustic-induced strain in axial and radial receiving modes are investigated and characterize the gain sensitivity dependent on the wavelength/Bragg length ratio. Then, ultrasonic testing in a water tank exhibited a maximum radial acoustic pressure-induced wavelength shift of 91.29 nm/MPa and a noise equivalent acoustic signal level of ~49.6 mPa/Hz1/2 in the range of 40-120 kHz, as well as a good gain flatness of less than 9.4 dB. This is significantly superior to FBG-based hydrophones previously ever reported to our knowledge. The proposed technique greatly simplifies the miniaturized integration of all-optical ultrasonic detectors and could, therefore, be further improved for ultra-high sensitive hydrophones in optoacoustic imaging.

engineering, electrical & electronic,optics,telecommunications

Ultrasonic Wave Sensor Based on Phase-Shift Fiber Bragg Grating for Seismic Physical Models

Ultrasonic imaging of seismic physical models using a phase-shifted fiber Bragg grating.

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Ultrasonic optical fiber sensing for composite structural health monitoring

Highly Stabilized Phase-Shifted Fiber Bragg Grating Sensing System for Ultrasonic Detection

Advanced suspended-core fiber sensor for seismic physical modeling

High-sensitivity Ultrasound Detection Based on Phase-Shifted Fiber Bragg Grating

Ultrasonic Structural Health Monitoring Using Fiber Bragg Grating

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

Recent Advancement of Phase Shifted Fiber Bragg Grating Sensor for Ultrasonic Wave Application: A Review

Fiber Grating Sensor Using Dynamic PZT Modulation

Detection of Focused Ultrasonic Fields with Fiber Bragg Grating

A Laser-Based Fiber Bragg Grating Ultrasonic Sensing System for Structural Health Monitoring

Ultrasonic Frequency Response of Surface Attached Fiber Bragg Grating

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

Adaptive ultrasonic sensor using a fiber ring laser with tandem fiber Bragg gratings

Research on Ultrasonic Hydrophone Based on Polarization Properties of FBG

Three-Dimensional Low-Frequency Earthquake Monitoring Vibration Sensor Based on FBG

D-Shaped Fiber Bragg Grating Ultrasonic Hydrophone With Enhanced Sensitivity and Bandwidth