Abstract:Micro-vibration measurement is crucial for fault diagnosis of robot joints. An increasing number of fiber Bragg grating (FBG) vibration sensors have been developed based on different sensing principles. However, these FBG vibration sensors cannot be applied to high-frequency vibration measurement or embedded into robot joints due to their low resonant frequency, narrow working frequency band, and large size. In this paper, a novel compact high-sensitivity FBG sensor is proposed to measure dynamic strain variations induced by micro-vibrations of robot joints. In the FBG sensor, a sensitization structure is designed, and an FBG is pasted on the sensitization structure by the two-point encapsulation method. When installing the FBG sensor onto an object, thin silicone rubbers are used to reduce the effect of the dynamic strain variation on two support components of the sensitization structure. To improve its measurement performance, the sensitization structure is optimized by response surface methodology and non-dominated sorting genetic algorithm. A vibration response experiment is executed by establishing a vibration test rig, which demonstrates that the FBG sensor has a resonant frequency of 10 kHz, a working frequency band of 50 Hz - 9 kHz, and a great linear response characteristic. Furthermore, after establishing a condition monitoring system of robot joints, the practicability and effectiveness of the FBG sensor for micro-vibration measurement of robot joints are demonstrated. The FBG sensor has the following advantages: compact structure, uniform stress distribution, high resonant frequency, wide working frequency band, strong embeddability, and great dynamic strain amplification capability.

Three-Dimensional Low-Frequency Earthquake Monitoring Vibration Sensor Based on FBG

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Research on S-type fiber Bragg grating acceleration sensor for low-frequency vibration monitoring

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Miniaturized fiber Bragg grating accelerator sensors for low-frequency vibration monitoring

Dual straight-wing FBG accelerometer for low-frequency vibration measurement

Miniature FBG Vibration Sensor With High Performance and Low Angle Dependence for Two-Dimensional Vibration Measurement

Design and test of a FBG acceleration sensor based on multi-stage flexible hinges

Broadband Flat Response High Sensitivity FBG Accelerometer Based on Multiresonance Structure

An FBG-Sensing Two-Dimensional Vibration Sensor Based on Multi-Axis Flexure Hinge

A Fiber Bragg Grating Sensing Based Triaxial Vibration Sensor

A novel fiber Bragg grating vibration sensor with double equal-strength cantilever beams

A symmetrical dual-mass block fiber Bragg grating vibration sensor based on a V-shaped flexible hinge

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

Fiber Bragg Grating Accelerometer Based on Asymmetric Shaped Flexible Hinge Structure

A Novel Compact High-Sensitivity Fiber Bragg Grating Sensor for Micro-Vibration Measurement of Robot Joints

Ultrasonic Structural Health Monitoring Using Fiber Bragg Grating

A fiber Bragg grating vibration sensor based on crossed variable section beam

Recent Advances and Tendency in Fiber Bragg Grating-Based Vibration Sensor: A Review

An FBG-Based 2-D Vibration Sensor with Adjustable Sensitivity