Abstract:An ultra-low power ECG processor ASIC (application specific integrated circuit) with R-wave detection and data compression is presented, which is designed for the long-term implantable cardiac monitoring (ICM) device for arrhythmia diagnosis. An adaptive derivative-based detection algorithm with low computation overhead for potential arrhythmia recording is proposed to detect arrhythmia with the occasional abnormal heart beats. In order to save as much as possible cardiac information with the limited memory size available in the ICM device, a hierarchical data buffer structure is proposed which saves 3 types of data, including the raw ECG data segments of 2 seconds, compressed ECG data segments of 45 seconds, and R-peak values and interval lengths of >2000 beat cycles. A modified swinging-door-trending (SDT) method is proposed for the ECG data compression. The ASIC has been implemented based on fully-customized near-threshold standard cells using the thick-gate transistors in 65-nm CMOS technology for low dynamic power consumption and leakage. The ASIC core occupies a die area of 1.77 mm2. The measured total power is 2.63 μW, which is among the ECG processors with the lowest core power consumption. It exhibits a relatively high positive precision rate (P+) of 99.3% with a sensitivity of 98.2%, in contrast to the similar designs in literature with the same core power consumption level. Also, an ECG data compression ratio (CR) of up to 17.0 has been achieved, with a good trade-off between the compression efficiency and loss.

A 12.9-µW 2-D ECG compression core based on NLSPIHT

A Lifting Wavelet Based Lossless and Lossy ECG Compression Processor for Wireless Sensors

A Dual-Mode ECG Processor with Difference-Insensitive QRS Detection and Lossless Compression

A Highly Adaptive Lossless ECG Compression ASIC for Wireless Sensors Based on Hybrid Gomlomb Coding.

Value Locality Based Storage Compression Memory Architecture for ECG Sensor Node

A Lossless Electrocardiogram Compression System Based on Dual-Mode Prediction and Error Modeling.

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

An ECG-SoC with 535nW/channel lossless data compression for wearable sensors

A novel ECG compression algorithm using Pulse-Width Modulation integrated quantization for low-power real-time monitoring

A 1.0 V 78 μw Reconfigurable ASIC Embedded in an Intelligent Electrode for Continuous Remote ECG Applications

A 2.63 μW ECG Processor With Adaptive Arrhythmia Detection and Data Compression for Implantable Cardiac Monitoring Device

ECG Compression Based on Combining of EMD and Wavelet Transform

Real-time Lossless ECG Compression for Low-Power Wearable Medical Devices Based on Adaptive Region Prediction

A 1.5-D Multi-Channel Eeg Compression Algorithm Based on Nlspiht

Ultralow Power Processor Employing Block Instruction for ECG Applications

Method and VLSI Implementation of Lossy-to-lossless LTM ECG Compression Framework

Reconfigurable Architecture for Multi-lead ECG Signal Compression with High-frequency Noise Reduction

Electrocardiograph Compression Based on Sifting Process of Empirical Mode Decomposition

A Lifting-Based 2-D Discrete Wavelet Transform Architecture for Data Compression of Bio-Potential Signals.

2-D Compression of ECG Signals Based on Context Models

A Low Power Qrs Detection Processor With Adaptive Scaling Of Processing Resolution