Abstract:Abstract Serving Stewart plat as wheel-legged construction, the most outstanding superiority of proposed wheel-legged hybrid robot (WLHR) is active vibration isolation during rolling on rugged terrain. This paper presents a force-driven control approach based on model predictive control (MPC) to design optimal control input for Stewart parallel wheel-leg that locomotes using swing foot trajectory. Adding adaptive impedance control in outermost loop, controlling framework prevents robot body horizontal and from vibration over rolling motion. Through dynamic model of Stewart mechanism, controller first creates predictive model by combining Newton-Euler equation, Newton-Raphson iteration of forward kinematic solving for current configuration, inverse kinematic calculation of Stewart obtaining desired joint position, and Gain/Integration module determining reference torque. With minimizing control deviation and input as objective function, a novel control optimization formulation generates optimum input for each control duration. These actuating force naturally enables each strut stretching and retracting used to realize six degree-of-freedom (6DOF) motion for Stewart wheel-leg. We exploit the variable-adapting method to reasonably adjust environmental impedance parameters by current position, velocity, force feedback of wheel-leg. This allow us to adequately acknowledge the desired support force tracking, isolating robot from isolation that is generated from unknown terrain. We demonstrate the validation of our control methodology on physical prototype by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strip. Respectively given PI controller and a sort of traditional impedance controller as comparison, a better performance of proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder, as well as IMU mounted on robot body.

A Ship Active Vibration Isolation System Based on a Novel 5-DOF Parallel Mechanism

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Nonlinear Control for an Active-passive Hybrid Compensation System

Kinematic control of a 3-DOF parallel stabilization platform

Analysis and Optimization of a Vibration Isolation Platform Based on 6-DOF Parallel Mechanism

Effects of the Stiffness of Vibration Isolators on Anti-shock Dynamics for Propulsive Shafting of Ship

Fuzzy-immune PID Control of a 6-DOF Parallel Platform for Docking Simulation

Semi-Active Control for A Multi-Dimensional Vibration Isolator with Parallel Mechanism

Dynamics Modeling and Modal Space Control Strategy of Ship-Borne Stewart Platform for Wave Compensation

Active and Passive Control Research on Attenuation and Isolation Vibration of Sonar Platform

Research on Multi-Dimensional Vibration Isolation Control System Based on a Parallel Mechanism.

An ADRC-based triple-loop control strategy of ship-mounted Stewart platform for six-DOF wave compensation

Harmonic analysis of a marine shaft-bearing suspension system and its semi-active control with PID strategy

Summary of Ship Active Vibration Isolation System

Simultaneous Decoupling Control of Translation and Rotation for a 6-DOF Vibration Isolator Based on the Stewart Platform

Method of ship motion modeling with dynamic positioning in waves

Modeling and controller design of an offshore wind service operation vessel with parallel active motion compensated gangway

Anti-Swaying Control Strategy of Ship-Mounted 3-RCU Parallel Platform Based on Dynamic Gravity Compensation

Active Vibration Isolation for A Parallel Wheel-legged Robot Based on Dynamic Model

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot

A modified 6-DOF hybrid serial–parallel platform for ship wave compensation