Abstract:The 3-RRRS mechanism (RRRS refers to kinematic pairs of a branched chain consisting of three R pairs (Rotational pairs) and one S pair (Spherical pair), successively) is used between a moving platform and a static platform, through which six-dimensional motion of the moving platform relative to the static platform can be achieved. Selecting six independently drivable joints from nine active joints makes it problematic to deal analytically with the kinematics of the 3-RRRS mechanism. In this article, a novel computer-aided geometric method for kinematic analysis is developed. This method can automatically detect the independently drivable joints for arbitrary kinematic chains. This method can be easily implemented compared to the analytical method of the forward kinematics. Based on the constraint relationship of the 3-RRRS mechanism, a general 3-RRRS mechanism digital model is built in the SolidWorks Application Program Interface embedded Visual Basic environment, in which the platform sizes and active driving angles are driven by the parameterized model, to make the moving platform move to the corresponding pose. After the pose of the moving platform is confirmed, the coordinate system is built in a preliminary sketch. The parameters are measured by the SolidWorks measuring functions, and the pose of the moving platform is obtained by combining homogeneous matrices. Using the computer-aided geometric method, the detailed kinematics formula is not required. The accuracy and efficiency of the computer-aided geometric method were assessed with some examples of kinematic analysis for the 3-RRRS mechanism. The results showed that the proposed method obtained competitive precision and calculation time to the analytical method and is beneficial as a convenient solving process. By using Visual Basic programming, a reachable poses analysis of the mechanism can be merged into the kinematics analysis system of the computer-aided geometric method. The computer-aided geometric method could be widely applied to kinematics analysis of mechanisms.

Instantaneous Motion of a 2-RCR Mechanism with Variable Mobility.

A Simple Method to Calculate Mobility with Jacobian

Mobility and Equilibrium Stability Analysis of Pin-Jointed Mechanisms with Equilibrium Matrix SVD

Kinematic Path Analysis of Kinematically Indeterminate Systems

Mobility Analysis Of A Sarrus Linkage-Like 7-R Single Closed Loop Mechanism

Virtual Chain Approach for Mobility Analysis of Multiloop Deployable Mechanisms

Cell Division Method for Mobility Analysis of Multi-Loop Mechanisms

Mobility, Singularity, and Kinematics Analyses of A Novel Spatial Parallel Mechanism

Mobility Analysis of Parallel Mechanisms Based on Screw Theory and Mechanism Topology

Mobility Analysis of Symmetric Deployable Mechanisms Involved in A Coplanar 2-Twist Screw System

Motion Characteristics of a Robotic Mechanism

Mobility Analysis of Two-Dof Multi-Loop Hybrid Driving Mechanism

Mobility analysis of hybrid driven planar 2-DOF seven-bar mechanisms

Mobility Analysis of Lower-Mobility Parallel Mechanisms Based on Screw Theory

Mobility Analysis for Single Loop Nr1p-Type Planar Kinematic Chain

Automatic mobility analysis of parallel mechanisms: an algorithm approach based on position and orientation characteristic equations

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Instantaneous Mobility and Constraint of a 3-PPS Parallel Mechanism

Forward Kinematic Analysis of a 3-RRRS Mechanism with Subordinate Driving Variables Using a Computer-Aided Geometric Method

A Kinematotropic Parallel Mechanism Reconfiguring Between Three Motion Branches of Different Mobility

Research on Mobility and Trajectory Atlas of Controlled RRRPP Mechanism