Abstract:This study focuses on addressing kinematic singularity analysis and avoidance issues for a space station remote manipulator system (SSRMS)-type reconfigurable space manipulator. The manipulator is equipped with a non-spherical wrist and two lockable passive telescopic links (LPTLs), which enable it to have both active revolute and passive prismatic joints and operate in two distinct modes. To begin with the kinematic singularity analysis, the study derives the differential kinematic equations for the manipulator and identifies the dominant Jacobian matrix that causes singularities. Subsequently, an in-depth analysis of singularities from multiple perspectives is conducted. Firstly, a kinematic singularity map method is proposed to capture the distribution of singularities within the reachable workspace. Then, the influence of the two LPTLs on singularities is thoroughly examined. Finally, a new method based on the matrix rank equivalence principle is introduced to determine singularity conditions, enabling the identification of all the singular configurations for the SSRMS-type reconfigurable manipulator. Notably, this method significantly reduces computational complexity, and the singularity conditions obtained have more concise equations. For the singularity avoidance problem, a novel method is developed, which simultaneously addresses the requirements of real-time performance, high precision, and the avoidance of both kinematic singularities and joint limit constraints. Benefiting from these excellent properties, the proposed method can effectively resolve the singularity issues encountered separately by the SSRMS-type reconfigurable manipulator in its two operational modes. Several typical simulations validate the utility of all the proposed methods.

Instantaneous Kinematics and Singularity Analysis of Spatial Multi-DOF Mechanisms Based on the Locations of the Instantaneous Screw Axes

Singularity and Kinematic Bifurcation Analysis of Pin-Bar Mechanisms Using Analogous Stiffness Method

The Singularity Study of Spatial Hybrid Mechanisms Based on Screw Theory

A Novel Methodology to Study the Singularity of Spatial Parallel Mechanisms

Singularity Analysis of a New 3-DOF Parallel Mechanism for a Parallel Kinematics Machine

Position, Singularity and Workspace Analysis of 3-Psr-o Spatial Parallel Manipulator

Mobility, Singularity, and Kinematics Analyses of A Novel Spatial Parallel Mechanism

Singularity analysis of a kinematically redundant (6+2)-DOF parallel mechanism for general configurations

Singularity analysis of a kinematically redundant (6+2)-DOF parallel mechanism for zero-torsion configurations

Kinematics, Singularity and Workspace of Planar 5R Symmetrical Parallel Mechanisms

The Analysis of Space Mechanism Singularity with Theory of Screws

Singularity loci research on high-speed travelling type of double four-rod spatial parallel mechanism

Screw Theory Based Singularity Analysis of Lower-Mobility Parallel Robots Considering the Motion/Force Transmissibility and Constrainability

A Kinematic Synthesis Methodology for P-Drivable Spatial Single Degree-of-Freedom Mechanisms to Avoid Singularities

Singularity analysis and avoidance for an SSRMS-type reconfigurable space manipulator with a non-spherical wrist and two lockable passive telescopic links

The Kinematics Study of a Class of Spatial Parallel Mechanism with Fewer Degrees of Freedom

Force/Motion Transmissibility Analysis of Six Degree of Freedom Parallel Mechanisms

Analysis of the Kinematic Characteristics of a High-Speed Parallel Robot with Schönflies Motion: Mobility, Kinematics, and Singularity

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Mobility Analysis of the 3-Upu Parallel Mechanism Based on Screw Theory

Singularity Analysis of the HALF Parallel Manipulator with Revolute Actuators