Abstract:Wrist rehabilitation robots are essential for assisting patients with stoke or wrist injuries. Such devices compensate for deficiencies in manual rehabilitation training, and reduce the workload of rehabilitation physicians. A parallel wrist rehabilitation robot (PWRR) driven by two pneumatic actuators is developed in this paper, consisting of two rotational degrees of freedom for the movements of flexion/extension (F/E) and radial/ulnar deviation (R/U). All components connected to the forearm or the wrist adopt an open structure to improve the wearable convenience, and the PWRR is suitable for most patients, especially those with hypertonia. To determine the PWRR range of motion, the physiological motion space (PMS) of the wrist joint in autonomous and boundary elliptical movements is measured with the help of a VICON motion capture system. The PMS in boundary motions processes an elliptical shape, and the ulnar deviations occupy the most range of motion. The theoretical workspace (TWS) of PWRR is then calculated and designed based on the kinematic model and the distribution characteristics of PMS. In addition, two indices are introduced to evaluate the kinematic performance of PWRR. A PWRR prototype is developed based on the optimal geometrical parameters and detailed structures. Its effective workspace (EWS), which has more clinical significance, is acquired by measuring the F/E and R/U movements during autonomic movements. The EWS, is smaller than TWS due to the physical structure, volume, and interference of mechanical elements. Besides, EWS can nearly encircle PMS, and satisfies all single-axis rehabilitations and compound motions of the wrist complex. The two indices, motion isotropy d(a) and condition number kappa, within TWS change smoothly with no mutation, suggesting that PWRR is sufficiently kinematically isotropic, and has no singularity configuration. The analysis shows that the developed PWRR can be applied widely in the wrist rehabilitation. (C) 2019 Elsevier B.V. All rights reserved.

Design and Analysis of a Wrist-Hand Manipulator for Rehabilitation of Upper Limb Dexterous Function

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Integrating Human Factors in the Systematic Mechanical Design of NPU-Wrist Rehabilitation Robot

Mechanism Design and Performance Analysis of a Wearable Hand Rehabilitation Robot

Design on Wrist and Gripper of Manipulator Based on Kinematics Analysis

System Design and Kinematic Analysis of a Dexterous Hand with Humanoid Characteristics

Design and Testing of a Soft Rehabilitation Glove Integrating Finger and Wrist Function

Mechanical Design and Analysis of a Novel Dexterous Hand Based on Grasping Manipulation.

Development of a rehabilitation robot for hand and wrist rehabilitation training

Design and Control of a Robotic Wrist Orthosis for Joint Rehabilitation.

Design of a self-aligning 3-DOF actuated exoskeleton for diagnosis and training of wrist and forearm after stroke

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

Configuration Optimization of a Dual-Arm Rehabilitation Robot

Developing a Whole-Arm Exoskeleton Robot with Hand Opening and Closing Mechanism for Upper Limb Stroke Rehabilitation

Design and Performance Verification of a Hybrid Robotic System for Hand and Wrist Rehabilitation

Design and Control of a Low-cost Non-backdrivable End-effector Upper Limb Rehabilitation Device

Design and performance analysis of a parallel wrist rehabilitation robot (PWRR)

Design and Analysis of Four-Finger Three-Joint Underactuated Hand Rehabilitation Mechanism

Design of A Hand Exoskeleton Rehabilitation Device

Design and Characterization of a High-performance Wearable Robot Using Symmetric Conjugate Surface Joints

Design of an Anthropomorphic Prosthetic Hand with Elastic Joints