Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Compliant assembly variation analysis of aeronautical panels using unified substructures with consideration of identical parts

Variation modeling and analysis with interval approach for the assembly of compliant aeronautical structures

Assembly Variation Prediction for Compliant Aeronautical Structures Using Fuzzy Interval Analysis

Variation modeling for fuselage structures in large aircraft digital assembly

Propagation Analysis of Variation for Fuselage Structures in Multi-Station Aircraft Assembly

Variation analysis driven by small-sample data for compliant aero-structure assembly

Multi Load-Transmitting Device Based Support Layout Optimization for Large Fuselage Panels in Digital Assembly

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

Numerical Study on Predicting and Correcting Assembly Deformation of a Large Fuselage Panel During Digital Assembly

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Joint Measuring and Evaluating Technology for Final Assembly of Aircraft Wing and Fuselage

Assembly Variation Analysis of Flexible Curved Surfaces Based on Bézier Curves

A new method for automatic shaft-hole assembly of aircraft components

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

A Review on Variation Modeling of Aircraft Assembly

Accuracy Analysis with Limited Samples During Aircraft Automatic Join-Assembly

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Design and Optimization of Flexible Assembly Platform Used for Three Sections Joint