Abstract:Reasonable design and feasible preparation of low-cost and stable oxygen reduction reaction (ORR) catalysts with excellent performance play a key role in the development of fuel cells and metal-air batteries. A 3D porous superimposed nanosheet catalyst composed of metal manganese covered with MnO2 nanofilms (P-NS-MnO2@Mn) was designed and synthesized by rotating disk electrodes (RDEs) through one-step electrodeposition. The catalyst contains no carbon material. Therefore, the oxidation and corrosion of the carbon material during use can be avoided, resulting in excellent stability. The structural and composition characterizations indicate that the nanosheets with sharp edges exist on the surface of the wall surrounding the macropore (diameter ∼ 5.07 μm) and they connect tightly. Both the nanosheets and the wall of the macropore are composed of metal manganese covered completely with MnO2 film with a thickness of less than 5 nm. The half-wave potential of the synthesized P-NS-MnO2@Mn catalyst is 0.86 V. Besides, the catalyst exhibits good stability with almost no decay after a 30 h chronoamperometric test. Finite element analysis (FEA) simulation reveals the high local electric field intensity surrounding the sharp edges of the nanosheets. Density functional theory (DFT) calculations reveal that the novel nanosheet structure composed of MnO2 nanofilms covered on the surface of the Mn matrix accelerates the electronic transfer of the MnO2 nanofilms during the ORR process. The high local electric field intensity near the sharp edge of the nanosheets effectively promotes the orbital hybridization and strengthens the adsorbing Mn-O bond between the active site Mn in the nanosheets and the intermediate OOH* during the ORR process. This study provides a new strategy for preparing transition metal oxide catalysts and a novel idea about the key factors affecting the catalytic activity of transition metal oxides for the ORR.

Shewanella-mediated biosynthesis of manganese oxide micro-/nanocubes as efficient electrocatalysts for the oxygen reduction reaction.

Monodisperse Ultrasmall Manganese-Doped Multimetallic Oxysulfide Nanoparticles as Highly Efficient Oxygen Reduction Electrocatalyst.

Strongly Coupled MnO 2 Nanosheets/Silver Nanoparticles Hierarchical Spheres for Efficient Oxygen Reduction Reaction Electrocatalysis

Manganous oxide nanoparticles encapsulated in few-layer carbon as an efficient electrocatalyst for oxygen reduction in alkaline media

Biomass-derived carbon fiber with atomic Mn-N4 sites for efficient electrocatalytic oxygen reduction reaction

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction.

Sonochemical preparation of stable porous MnO 2 and its application as an efficient electrocatalyst for oxygen reduction reaction.

Single-atomic Mn sites coupled with Fe 3 C nanoparticles encapsulated in carbon matrixes derived from bimetallic Mn/Fe polyphthalocyanine conjugated polymer networks for accelerating electrocatalytic oxygen reduction

Manganese vanadium oxide hollow microspheres: a novel electrocatalyst for oxygen reduction reaction

Highly Active Carbon/alpha-MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Manganese Oxide-Induced Strategy to High-Performance Iron/nitrogen/carbon Electrocatalysts with Highly Exposed Active Sites.

Highly Active Carbon/α‐MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

MOF-Derived Three-Dimensional Porous Dodecahedral Structured Bimetallic Mn/Co-C-N Composite for High-Performance Durable Oxygen Reduction Reaction Electrocatalysts

Heterostructured Cu/CuO Nanoparticles Embedded within N-Doped Carbon Nanosheets for Efficient Oxygen Reduction Reaction

Dual-MOFs-Derived Fe and Mn Species Anchored on Bamboo-like Carbon Nanotubes for Efficient Oxygen Reduction as Electrocatalysts

Nitrogen doping regulates microcrystal structure of interconnected Mn oxide particles/rods for oxygen reduction electrocatalysis

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Transition Metal Oxides/Carbides @ Carbon Nanotube Composites as Multifunctional Electrocatalysts for Challenging Oxidations and Reductions.

In-situ Transformed Mott–Schottky Heterointerface in Silver/manganese Oxide Nanorods Boosting Oxygen Reduction, Oxygen Evolution, and Hydrogen Evolution Reactions

Metallo-deuteroporphyrins derived multi-layered hollow carbon spheres electrocatalysts for highly efficient oxygen reduction reaction

Superior bifunctional oxygen electrocatalysts based on Co2MnO4 with mixed site occupancy, Mn-rich surfaces and twin defects