Abstract:We proposed a novel sensor based on an ultracompact leaky-guided liquid core fiber Mach–Zehnder interferometer (LLCFMZI) for high modulation of an interference spectrum. The sensor structure is based on a micro-sized hollow-core fiber (HCF) splicing a tilt end face single-mode fiber (SMF) to create a miniature oblique gap for the effective access of different liquids. The liquid core with a relatively lower refractive index (RI) than the cladding can achieve a leaky-mode optical waveguide (LMOW) mechanism, and its volume is only approximately 7.85 pL. In addition, the utilized micro-length HCF can reduce the energy loss of core in the LMOW to obtain an acceptable extinction ratio (>30 dB) with high temperature (T) sensitivity in the interference spectra. Experimental results show that the interference spectra can be highly modulated within the wide measurement range of 1250–1650 nm with a steadily linear response for thermal effect. The measured temperature sensitivities (T-sensitivities) of various liquids of DI water, ethanol, and Cargille-liquid (nD = 1.305) are 0.8869, 4.4754, and 4.8229 nm/°C, and the corresponding measured thermal optics coefficient (TOC) are −4.16 × 10−5, −2.11 × 10−4, and −3.6 × 10−4 °C−1, respectively. Measurement results demonstrate that the used liquids with a higher TOC can obtain better T-sensitivity modulation. The highest experimental sensitivity of the liquid-core filled with Cargille-liquid (nD = 1.40) is up to +13.87 nm/°C with a corresponding TOC of −4.07 × 10−4 °C−1. Furthermore, the experimental and theoretical values are in good agreement according to FSR the measuring scheme that investigates the effectiveness of the proposed LLCFMZI.

Detection of Liquid Level with an MI-Based Fiber Laser Sensor Using Few-Mode EMCF

A thin-core fiber modal interferometer for liquid-level sensing

High-resolution liquid level sensor utilizing a microwave photonics interrogated multicore fiber interferometer

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber fabricated by femtosecond laser-induced water breakdown

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

Liquid level sensor based on a single-mode hetero-core fiber structure

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Self-Temperature Compensated Fiber-Optic Liquid Level Sensor With Ultra-Long Linear Range Using Quasi-Single Modal Interferometer

A liquid lever sensor based on an abrupt taper and micro‐arc Michelson interferometer in single‐mode fiber

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

Optical fiber micro-hole sensor fabricated with femtosecond laser

Fiber Optic Liquid Level Sensor Based on Integration of Lever Principle and Optical Interferometry

White-light interferometric fiber optic liquid level sensor based on MEMS Fabry-Perot cavity

Highly Modulated In-Fiber Mach–Zehnder Interferometer Based on an Ultracompact Leaky-Guided Liquid Core

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

Nanoliter liquid refractive index sensing using a silica V-groove fiber interferometer

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Highly Sensitive Liquid-Level Sensing Based on Microwave Frequency Domain Reflectometry and Interferometry

Fiber Ring Laser Based on SMF–TCF–SMF Structure for Strain and Refractive Index Sensing

Side-Polish Plastic Optical Fiber Based SPR Sensor for Refractive Index and Liquid-Level Sensing