Abstract:Visible light communication (VLC) has been emerged as a complementary promising technology to its radio-frequency (RF) counterpart due to its considerable merits, such as safety to human beings, wide spectrum without license and non-interference to RF communication. In VLC, white LEDs, consisting of red-green-blue (RGB) and phosphor-converted LEDs, are usually utilized to facilitate both data transmission and illumination, where RGB LEDs are preferred to support higher data rate communications. In RGB LEDs, the mixing ratio of the red, green and blue lights is flexible in the chromaticity diagram. As long as the alternation of mixing ratio lies in a MacAdam ellipse or the speed of the alternation is fast enough, the variations of emitted white light cannot be perceived by human beings. Therefore, additional information can be carried by different mixing ratio and index modulation technique is introduced firstly in RGB-LED-based VLC wireless systems in order to enhance either spectral or energy efficiency. Different from the state-of-the-art methods, the index modulation is performed in the chromaticity domain rather than the traditional frequency, spatial and time domains, which provides a new perspective of index modulation. More specifically, in the proposed chromaticity-domain index modulation (CD-IM) with white RGB LEDs, the input bits are divided into subblocks, including index bits and data bits. The index bits are used to select different mixing ratio, which are corresponding to different direct current (DC) bias of RGB channels. The data bits are further split into three parts for the pulse amplitude modulation (PAM) on each color channel independently. The generated individual alternating current (AC) is then added to its corresponding DC current of each color channel. Since DC and AC currents could convey the information concurrently, the spectral efficiency could be improved considerably. At the receiver, a maximum likelihood (ML) detector is employed to detect the index bits as well as the data bits on the RGB channels simultaneously. Simulation results illustrate that our proposed CD-IM achieves better BER performance in comparison with its traditional color shift keying (CSK) and PAM counterparts under the same spectral efficiency.

DD-informative modulation for visible light communications under lighting constraints

DC-Informative Joint Color-Frequency Modulation for Visible Light Communications

Modulation Design for Multi-Carrier Visible Light Communications with Signal-Dependent Noise

From DC-Biased to DC-Informative Optical OFDM.

Optical Dual-Mode Index Modulation Aided Ofdm for Visible Light Communications

Power-efficient High-Dimensional Constellation Design for Visible Light Communications

Quad-LED and Dual-LED Complex Modulation for Visible Light Communication

Spectral-Efficient Hybrid Dimming Scheme for Indoor Visible Light Communication: A Subcarrier Index Modulation Based Approach

Visible Light Communication Optimization under Lighting Constraints

A Generalized Dimming Control Scheme for Visible Light Communications

Chromaticity-domain Index Modulation for Visible Light Communication

An Adaptive Scaling and Biasing Scheme for OFDM-based Visible Light Communication Systems.

Research of Multi-Dimensional Multiplexing Schemes in Visible Light Communication

Energy-efficient Modulation for Visible Light SCMA System with Signal-dependent Noise.

LED Based High-Speed Visible Light Communications

Constellation Design for Multi-color Visible Light Communications

Visible Light Communications Using OFDM and Multiple LEDs

Generalized Spatial Modulation Based Hybrid Dimming Scheme for Visible Light Communication

An Overview of OFDM-Based Visible Light Communication Systems from the Perspective of Energy Efficiency Versus Spectral Efficiency

Power and rate optimization for visible light communication system with lighting constraints

A Ppm-Based Four-Dimensional Modulation Scheme For Visible Light Communications