Abstract:Abstract The reversible insulating-to-conducting phase transition (ICPT) of vanadium dioxide (VO2) makes it a versatile candidate for the implementation of integrated optical devices. In this paper, a bi-functional in-line optical device based on a four-layer stack of PMMA/graphene/VO2/graphene deposited on a side-polished fiber (SPF) is proposed. The structure can be employed as an ultra-compact TE modulator or a TM-pass polarizer, operating at 1.55 μm. We show that the ICPT characteristic can be used for polarization-selective mode shaping (PSMS) to manipulate orthogonal modes separately. On the one hand, as an optical modulator, the PSMS is used to modify mode profiles so that the TE mode attenuation is maximized in the off-state (and IL is minimized in the on-state), while the power carried by the TM mode remains unchanged. As a result, a TE modulator with an ultrahigh extinction ratio (ER) of about ER = 165 dB/mm and a very low insertion loss (IL) of IL = 2.3 dB/mm is achieved. On the other hand, the structure can act as a TM-pass polarizer featuring an extremely high polarization extinction ratio (PER) of about PER = 164 dB/mm and a low TM insertion of IL = 3.86 dB/mm. The three-dimensional heat transfer calculation for the ICPT process reveals that the response time of the modulator is in the order of few nanoseconds. Moreover, the required bias voltage of the proposed device is calculated to be as low as 1.1 V. The presented results are promising a key step towards the realization of an integrated high-performance in-line modulator/polarizer.

Graphene Assisted TE/TM-Independent Polarizer Based on Mach–Zehnder Interferometer

A Te/Tm Independent Polarizer Based On Graphene Interferometer

Broadband Graphene/Glass Hybrid Waveguide Polarizer

An Integrated Surface Plasmonic TE-Pass Polarizer on a Silica-on-Silicon Waveguide

Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide

Graphene-Aluminum Oxide Metamaterial for A Compact Polarization-Independent Modulator

Electrically Tunable Polarizer Based on Graphene-Loaded Plasmonic Cross Antenna

Polarization-Independent Optoelectronic Modulator Based on Graphene Ridge Structure

Polarization Modulation Based on the Hybrid Waveguide of Graphene Sandwiched Structure

Silicon-based Optical Waveguide Polarizer Using Photonic Band Gap

Waveguide Engineering of Graphene Optoelectronics—Modulators and Polarizers

Ridge Waveguide Assisted Highly Efficient Transverse-Electric-pass Polarizer Based on a Hybrid Plasmonic Waveguide.

Tunable TE/TM mode converter with an orthogonal graphene-based grating structure

Design of stable and high-efficiency graphene-based polarizers for oblique angle of incidence in terahertz frequency.

Reconfigurable TE-pass polarizer based on lithium niobate waveguide assisted by Ge2Sb2Te5 and silicon nitride

Polarization-insensitive Terahertz Graphene-based Optical Switches

Polarization-insensitive Electro-Optical Modulator Based on Polymer-Filled Silicon Cross-Slot Waveguide

A high-performance TE modulator/TM-pass polarizer using selective mode shaping in a VO2-based side-polished fiber

Design of Polarization-Independent Magneto-Optical Waveguides

Design of graphene-based polarization-insensitive optical modulator

Ultracompact TE-Pass Polarizer Based on a Hybrid Plasmonic Waveguide