Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

Effect of Rbf Interpolation Parameters on the Mesh Motion and Its Application to High Deflection Flexible Flaps

An Improved Meshfree Scheme Based on Radial Basis Functions for Solving Incompressible Navier–Stokes Equations

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

Adjoint-Response Surface Method in Aerodynamic Shape Optimization of Turbomachinery Blades

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Sensitivity-Based Parameterization for Aerodynamic Shape Global Optimization

Efficient Radial Basis Function Mesh Deformation Methods for Aircraft Icing

Accurate And Robust Adaptive Mesh Refinement For Aerodynamic Simulation With Multi-Block Structured Curvilinear Mesh

Adaptive mesh refinement for simulating fluid‐structure interaction using a sharp interface immersed boundary method

Simulation of fluid‐structure interaction using the boundary data immersion method with adaptive mesh refinement

Fluid-structure Analysis of Flapping-Wing Rotorcraft Considering Stiffness Influence

Local Modified Mesh Deformation Based on Radial Basis Functions for Fluid Solid Interaction in Reactor Core

A high-efficiency sharp-interface immersed boundary method based on multi-linear interpolation

Fluid Structure Interaction of Unsteady Aerodynamics of Flapping Wing at Low Reynolds Number

Lagrangian radial basis function‐based particle hydrodynamics method and its application for viscous flows

Modification of the Class-Shape-Transformation Parameterization Based on Radial Basis Functions

Robust radial basis function interpolation based on geodesic distance for the numerical coupling of multiphysics problems

Comparative Evaluation of Meshfree Data Transfer Methods in Hydromechanical Problems

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching

Deformable Blade Element and Unsteady Vortex Lattice Fluid-Structure Interaction Modeling of a 2D Flapping Wing

Local physical gradient-based coupling information interpolate method and application on double-wall turbine blade multidisciplinary analysis