Abstract:Background: Robot-assisted laparoscopic surgery offers several advantages compared with open surgery and conventional minimally invasive surgery. However, one issue that needs to be resolved is a collision between the robot arm and the assistant instrument. This is mostly caused by miscommunication between the surgeon and the assistant. To resolve this limitation, an assistant surgical robot system that can be simultaneously manipulated via a wireless controller is proposed to allow the surgeon to control the assistant instrument. Methods: The system comprises two novel master interfaces (NMIs), a surgical instrument with a gripper actuated by a micromotor, and 6-axis robot arm. Two NMIs are attached to master tool manipulators of da Vinci research kit (dVRK) to control the proposed system simultaneously with patient side manipulators of dVRK. The developments of the surgical instrument and NMI are based on surgical-operation-by-wire concept and hands-on-throttle-and-stick concept from the earlier research, respectively. Tests for checking the accuracy, latency, and power consumption of the NMI are performed. The gripping force, reaction time, and durability are assessed to validate the surgical instrument. The workspace is calculated for estimating the clinical applicability. A simple peg task using the fundamentals of laparoscopic surgery board and an in vitro test are executed with three novice volunteers. Results: The NMI was operated for 185 min and reflected the surgeon's decision successfully with a mean latency of 132 ms. The gripping force of the surgical instrument was comparable to that of conventional systems and was consistent even after 1000 times of gripping motion. The reaction time was 0.4 s. The workspace was calculated to be 8397.4 cm(3). Recruited volunteers were able to execute the simple peg task within the cut-off time and successfully performed the in vitro test without any collision. Conclusions: Various experiments were conducted and it is verified that the proposed assistant surgical robot system enables collision-free and simultaneous operation of the dVRK's robot arm and the proposed assistant robot arm. The workspace is appropriate for the performance of various kinds of surgeries. Therefore, the proposed system is expected to provide higher safety and effectiveness for the current surgical robot system.

A Shape Memory Alloy-Actuated Surgical Instrument with Compact Volume

Design and Analysis of a Wire-Driven Multifunctional Robot for Single Incision Laparoscopic Surgery

A Robotic Laparoscopic Tool with Enhanced Capabilities and Modular Actuation

Effective Manipulation in Confined Spaces of Highly Articulated Robotic Instruments for Single Access Surgery

Development of a Human-Arm Like Laparoscopic Instrument

A Novel 4-Dof Surgical Instrument with Modular Joints and 6-Axis Force Sensing Capability

Development of a Control Algorithm for a Hybrid Structure Surgical Manipulator

Design of a Robotic Laparoscopic Tool with Modular Actuation.

Design of multi-degrees-of-freedom dexterous modular arm instruments for minimally invasive surgery

Design Of A Smart 3d-Printed Wristed Robotic Surgical Instrument With Embedded Force Sensing And Modularity

Design and Compensation Control of a Flexible Instrument for Endoscopic Surgery

Design and validation a minimally invasive robotic surgical instrument with decoupled pose and multi-DOF

Flexible instrument with contact‐aided structure and force feedback for endoscopic surgery

Hand-held robotic instrument for dextrous laparoscopic interventions

A Laminated Continuum Robot With Gripping Force-Sensing Forceps for Robot-Assisted Minimally Invasive Surgeries

A Novel Structure of A Less Invasive Forceps to Realize Linear Clamping for Endoscopic Surgery

A Robotic Surgical Tool with Continuum Wrist, Kinematically Optimized Curved Stem, and Collision Avoidance Kinematics for Single Port Procedure

Development of A Shape Memory Alloy Actuator for Transanal Endoscopic Microsurgery

A development of assistant surgical robot system based on surgical-operation-by-wire and hands-on-throttle-and-stick

Designing, Prototyping, and Testing a Flexible Suturing Robot for Transanal Endoscopic Microsurgery

Surgical robot for single-incision laparoscopic surgery