Abstract:A key property for high-frequency inductive applications is the magnetic softness, ideally characterized by complete reversibility of the hysteresis curve. Magnetic softness of alloys depends on the dimensional ratio of grain size to the correlation length. The random anisotropy model predicts the optimum magnetic softness if the crystallite size is well below the correlation length. Based on this theory, a common strategy in processing is to obtain extremely fine nanoscale grains via rapidly solidified alloys, followed by a controlled vacuum anneal. As is well known, this conventional approach requires two demanding experimental conditions: 1) an extremely high quench rate, & x003E;10(5) K/s, and 2) a high vacuum anneal near 600 & x00B0;C to avoid oxidation. Furthermore, the completely amorphous ribbon is extremely elastic and mechanically strong and is not easily made into the fine powder form for net-shaping and 3-D printing of the soft magnets. Therefore, annealing to induce crystallization is a necessary step before using any conventional powdering techniques, such as ball milling. In this article, we report a new processing strategy of making Fe77Ni5.5Co5.5Zr7B4Cu powders directly from the as-spun ribbons without any crystallization annealing step. This is achieved by melt spinning of the alloy at a relatively low quenching rate, resulting in partially crystallized ribbons that deform plastically, a behavior that is in sharp contrast to its amorphous counterpart. The ribbon samples are ball milled into fine powders by tungsten carbide (WC) at various time intervals. Magnetization measurements show extremely low coercive field (Hc) of 0.51 Oe for the powder that is ball milled for 60 min. However, Hc consistently increases with ball milling time, as the samples are strain-hardened, introducing more magneto anisotropy. The coercive fields of these samples are easily recovered during the high-temperature magnetization measurement at 900 K, and an Hc of 3.78 Oe is obtained upon recovery. This strategy paves a new way for straightforwardly making soft magnetic powders while avoiding high quenching rate requirement and the possibility of oxidation during annealing.

Iron-silicon-chromium soft magnetic powder, preparation method and application thereof

Iron-based nanocrystalline soft-magnetic alloy with excellent high-frequency performance and preparation method thereof

Microwave absorbing mechanism of soft magnetic alloy Fe85Si2Al6Cr7

Preparation and magnetic properties of high DC-bias performance Fe-Si-Nb-B-Cu/carbonyl iron chip inductors

Microstructure and soft magnetic properties of nanocrystalline Fe–Si powders

Study of Novel Fe-Based Amorphous/Nanocrystalline Soft Magnetic Powder Cores with NiCuZnFe2O4 Coating Layer

Research on the soft magnetic properties of iron–nickel magnetic powder core composite with carbonyl iron powder

Magnetic Spectra of Soft Magnetic Composites Based on Fe-Si-Cr-B Amorphous and Carbonyl-Iron Powders

Fabrication and excellent performance of amorphous FeSiBCCr/organic-inorganic hybrid powder core

Magnetic Properties of the Soft Magnetic Composites Prepared Using Mixtures of Carbonyl Iron, FeSiCr, and FeSiAl Alloy Powders

Improving the Magnetic Properties of FeSiB Soft Magnetic Composites by Adding Untreated or Phosphated Fe Powders

Preparation of Fe–Si–Ni soft magnetic composites with excellent high-frequency properties

Processing of Soft Magnetic Fine Powders Directly from As-Spun Partial Crystalline Fe 77 Ni 5.5 Co 5.5 Zr 7 B 4 Cu Ribbon Via Ball Mill Without Devitrification

Soft magnetic properties of nano-SiO2 coated FeNi alloy powder at high frequencies

Industry-oriented Fe-based amorphous soft magnetic composites with SiO2-coated layer by one-pot high-efficient synthesis method

Improved soft magnetic properties of FeSi/FeSiCrBC compound powder core induced by enhanced magnetic coupling

Improving Power-Inductor Performance by Mixing Sub-micro Fe Powder with Amorphous Soft Magnetic Composites

NiCoCrFeY High Entropy Alloy Nanopowders and Their Soft Magnetic Properties

Efficient synthesis of TiO2-coated layer for Fe-based soft magnetic composites and their regulation mechanism analysis on magnetic properties

Improved Anti-Saturation Performance of Fe-Si-Al Soft Magnetic Powder Core via Adjusting the Alloy Composition

Preparation of FeNiMo/SiO<sub>2</sub> Composite Core and Regulation of Soft Magnetic Properties