Abstract:BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT.ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT.Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals.ResultsConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. Optical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. The objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Five teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Results ConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. Our ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries.

Clinical SWIR and CP-OCT imaging of interproximal lesions

Short-Wavelength Infrared Imaging of Infected and Affected Dentin

In vitro early proximal caries detection using trilateral short-wave infrared reflection at 1050 and 1550 nm

Detection of Early Dental Caries Based on Optical Methods

Study of validity of autofluorescence-based incipient occlusal caries detection in vitro compared to DIAGNOdent pen

In vitro Assessment of lesion activity using simultaneous time-resolved reflectance imaging at 1300 and 1950 nm

Near-infrared imaging in orthodontic intraoral scanners for early interproximal caries detection

Visualization of Pulpal Structures by SWIR in Endodontic Access Preparation

Early stage dental caries detection using near infrared spatial frequency domain imaging

Validation of clinical photography and a laser fluorescence device for assessment of enamel demineralization during multi-bracketed fixed orthodontic treatment

Nondestructive assessment of the severity of occlusal caries lesions with near-infrared imaging at 1310 nm

Detection of Simulated Periradicular Lesions in Porcine Bone by Optical Coherence Tomography.

Objective identification of dental abnormalities with multispectral fluorescence imaging

Quantitative analysis of the degree of demineralization for bleached enamel by optical coherence tomography

Development of optical coherence tomography incorporated image processing algorithms for the multidimensional assessment of concealed enamel micro-crack

Potential Application of Non-Invasive Optical Imaging Methods in Orthodontic Diagnosis

Real-Time Monitoring and Quantitative Evaluation of Resin In-Filtrant Repairing Enamel White Spot Lesions Based on Optical Coherence Tomography

Ex vivo human teeth imaging with various photoacoustic imaging systems

Characterization of dental caries using Optical Coherence Tomography

Probing the micro- and nanoscopic properties of dental materials using infrared spectroscopy: A proof-of-principle study

3D evaluation of composite resin restoration at practical training using swept-source optical coherence tomography (SS-OCT)