Abstract:BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT.ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT.Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals.ResultsConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. Optical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. The objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Five teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Results ConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. Our ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries.

Detection of Simulated Periradicular Lesions in Porcine Bone by Optical Coherence Tomography.

Endoscopic Optical Coherence Tomography Angiography Using Inverse SNR-amplitude Decorrelation Features and Electrothermal Micro-Electro-mechanical System Raster Scan

Detection Of Dental Root Fractures Based On Endoscopic Swept Source Optical Coherence Tomography

Detection and Measurement of Artificial Periapical Lesions by Cone-Beam Computed Tomography

[Detection of Root Cracks after Root Canal Preparation Using Rotary NiTi Systems by Optical Coherence Tomography (OCT) Scan].

High-precision and non-invasive measurement of crestal bone level by optical coherence tomography

[Construction of Swept Source Optical Coherence Tomography Imaging System for Root Canal Endoscopy and Application in Diagnosis of Root Fractures].

Diagnostic accuracy of CBCT versus intraoral imaging for assessment of peri-implant bone defects

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography

Dental Diagnosis and Treatment Assessments: Between X-rays Radiography and Optical Coherence Tomography

Imaging Biomarkers of Oral Dysplasia and Carcinoma Measured with In Vivo Endoscopic Optical Coherence Tomography

[Validity of digital periapical radiography and cone beam computed tomography in the detection of peri-implant bone defects: in vitro study]

Evaluation of dental caries, tooth crack, and age-related changes in tooth structure using optical coherence tomography

In Vivo Detection of Subtle Vertical Root Fracture in Endodontically Treated Teeth by Cone-beam Computed Tomography.

Comparison of Measurements on Cone Beam Computed Tomography for Periodontal Intrabony Defect with Intra-surgical Measurements.

Imaging furcation defects with low-dose cone beam computed tomography

Diagnostic Accuracy of Cone Beam Computed Tomography in Identifying Peri-implantitis-Like Bone Defects Ex Vivo

Characterization of dental caries using Optical Coherence Tomography

Cone-Beam Computed Tomography Detection of Separated Endodontic Instruments

The Ability of Cone-Beam Computed Tomography to Detect Simulated Buccal and Lingual Recesses in Root Canals.

A retrospective study on molar furcation assessment via clinical detection, intraoral radiography and cone beam computed tomography