Abstract:In single-inductor multiple-output converters, the multiplexing of the inductor at each output port will inevitably lead to severe cross-regulation effect. This paper aims to investigate the steady state performance and transient state cross-regulation in the single-inductor multiple-output DC-DC converters. A ripple-based averaged model is proposed to describe the inherent cross-regulation characteristics of single-inductor dual-output (SIDO) Buck-Boost DC-DC converter by considering the three piecewise ripple of the inductor current. Then, the steady state performance analysis is carried out to show the cross-coupling effect on the power distribution relationship and voltage gains of the two output ports. Furthermore, the nonlinear modal series representation is derived to describe the transient behavior of SIDO converter under different load disturbances. More significantly, based on the nonlinear modal analysis, the cross-regulation factors are proposed to evaluate the influence of some key circuit parameters on the transient state cross-regulation. It is found that increasing kp2 may improve the transient cross-regulation performance of the output voltages, but non-ideal factor VF has little influence on the transient cross-regulation. This provides much design-oriented information to suppress the cross-regulation and optimize the transient performance of the SIDO converter. Finally, the effectiveness of the above analysis is verified by the experimental results. This paper proposes one design-oriented analysis method to investigate the cross-regulation in the SIDO DC-DC converters based on the ripple-based averaged model. Firstly, the steady state analysis is carried out to show the cross-coupling effect on the power distribution of the two output ports. Then, according to the nonlinear modal analysis, the cross-regulation factors are defined to identify the key parameters for the transient cross-regulation, which provides some design-oriented information to suppress the cross-regulation.

Single-Inductor Dual-Output Buck–Boost Power Factor Correction Converter

A Low Cross Regulation Single-Inductor Multi-Output DCDC Converter

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Single-stage Power Factor Correction Converter with Coupled Input Current Shaping Inductor

A High Efficiency Single-Inductor Dual-Output Buck Converter With Adaptive Freewheel Current And Hybrid Mode Control

A Single-Inductor Dual-Output Buck Converter with Self-Adapted PCCM Method

Single Coupled-Inductor Dual Output Soft-Switching DC–DC Converters with Improved Cross-Regulation and Reduced Components

A Family of Single-Phase Hybrid Step-Down PFC Converters

A 90% peak efficiency single-inductor dual-output buck-boost converter with extended-PWM control

A Single-Inductor Dual-Output Switching Converter with Low Ripples and Improved Cross Regulation

Performance Analysis of Coupled Inductor Based Multiple-Input DC/DC Converter with PWM Plus Phase-Shift (PPS) Control Strategy

A Dual-Mode Single-Inductor Dual-Output Dc-Dc Converter With Fast Transient Response

A Single-inductor Dual-output Buck DC-DC Converter with Adaptive Dead Time Adjustment and Dynamic Voltage Scaling

A Single-Inductor Dual-Output Switching Converter with Average Current Mode Control

Quasi-SM Controller for SIDO Buck Converter with Self-Adaptive Free-Wheeling Current Level

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

Three Phase PFC Converter with Multilevel Inductive Switching Network

A PFC Converter With Novel Integration of Both the EMI Filter and Boost Inductor

Analysis and Design of a ZVS Boost/buck-Boost Dual Mode PFC Converter with Universal Input and Wide Output Voltages

Design‐oriented analysis of cross‐regulation in single‐inductor dual‐output Buck‐boost DC‐DC converters

A Dual-Mode Single-Inductor Dual-Output Switching Converter With Small Ripple