Abstract:Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with overlay being its largest contribution. Overlay errors can lead to fatal failures of IC devices such as short circuits or broken connections in terms of P2P electrical contacts. Therefore, it is essential to develop effective overlay analysis and control techniques to ensure good functionality of fabricated semiconductor devices. In this work we have used an imec N14 BEOL process flow using LELE patterning technique to print metal layers with minimum pitch of 48nm with 193i lithography. FF structures are decomposed into two mask layers (M1A and M1B) and then the LELE flow is carried out to make the final patterns. Since a single M1 layer is decomposed into two masks, control of overlay between the two masks is critical. The goal of this work is of two-fold as, (a) to quantify the impact of overlay on capacitance and (b) to see if we can predict the final capacitance measurements with selected machine learning models at an early stage. To do so, scatterometry spectra are collected on these electrical test structures at (a)post litho, (b)post TiN hardmask etch, and (c)post Cu plating and CMP. Critical Dimension and overlay measurements for line-space pattern are done with SEM post litho, post etch and post Cu CMP. Various machine learning models are applied to do the capacitance prediction with multiple metrology inputs at different steps of wafer processing. Finally, we demonstrate that by using appropriate machine learning models we are able to do better prediction of electrical results.

Machine learning and pattern matching in physical design

Accelerating Chip Design with Machine Learning: from Pre-Silicon to Post-Silicon

Machine Learning for Mask/wafer Hotspot Detection and Mask Synthesis

Training Data Data Machine Learning Algorithm Learned Model Prediction Training Prediction

Special Session: Machine Learning for Embedded System Design

Implementation of Machine Learning in VLSI Integrated Circuit Design

Guest Editor's Introduction: Machine Learning for VLSI Physical Design

Survey of Machine Learning for Software-assisted Hardware Design Verification: Past, Present, and Prospect

Applying Machine Learning Models on Metrology Data for Predicting Device Electrical Performance

Machine Learning for Electronic Design Automation: A Survey

Pushing Multiple Patterning in Sub-10Nm: Are We Ready?

MLCAD: A Survey of Research in Machine Learning for CAD Keynote Paper

Machine Learning in Nanometer AMS Design-for-Reliability : (invited Paper)

Machine Learning in Materials Design: Algorithm and Application*

Pushing Multiple Patterning in Sub-10nm: Are We Ready? (invited Paper)

Machine Learning Based Wafer Defect Detection

Methods and applications of machine learning in computational design of optoelectronic semiconductors

Machine Learning Boosts the Design and Discovery of Nanomaterials

A Survey on Machine Learning in Lithography

Deep learning for electron and scanning probe microscopy: From materials design to atomic fabrication

Machine learning-enhanced predictive modeling for arbitrary deterministic lateral displacement design and test