Abstract:Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity.

Spark plasma sintering of tungsten-based WTaVCr refractory high entropy alloys for nuclear fusion applications

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Preliminary exploration of a WTaVTiCr high-entropy alloy as a plasma-facing material

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications

A prospect of using ternary W-5 wt%V-5 wt%Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material

A First-Principles Study of the Structural and Thermo-Mechanical Properties of Tungsten-Based Plasma-Facing Materials

Development of Tungsten As Plasma-Facing Materials by Doping Tantalum Carbide Nanoparticles

Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Plasma processed tungsten for fusion reactor first-wall material

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

First-principles study of the energetics and the local chemical ordering of tungsten-based alloys

Recent progress of tungsten-based high-entropy alloys in nuclear fusion

Microstructure and Mechanical Properties of Novel High-Strength, Low-Activation Wx(TaVZr)100-x (x = 5, 10, 15, 20, 25) Refractory High Entropy Alloys

Development of irradiation tolerant tungsten alloys for high temperature nuclear applications

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

Microstructure and Mechanical Properties of High-Specific-Strength (TiVCrZr)100−xWx (x = 5, 10, 15 and 20) Refractory High-Entropy Alloys

On the WEDM of WNbMoTaZr x (x = 0.5, 1) Refractory High Entropy Alloys

First-principles study of hydrogen capture, solution and mechanical effects in transition metal tungsten alloy W-TM (V, Nb, Ta)

Recent progress on preparation routes and performance evaluation of ODS/CDS-W alloys for plasma facing materials in fusion devices

Discovering tungsten-based composites as plasma facing materials for future high-duty cycle nuclear fusion reactors