Abstract:Abstract Structural Health Monitoring (SHM) uses sensors in advanced engineering structures to evaluate integrity and detect damage or deformation affecting structural performance, e.g. cracks, holes, or corrosion. Carbon fiber (CF) textile composites are commonly used to reinforce structures such as aircraft, vehicles, or bridges due to their high tensile strength to weight ratio, chemical resistance, and thermal and electrical conductivity. Printing electronics on textiles is a scalable manufacturing technology combining the physical properties of textile materials with the added functionality of electronic elements making them self-sensing. Extrusion printing is a contactless digital printing method to print electrical conductors and passive circuit elements. This paper proposes to combine conventional CF composite manufacturing processes with printed conductors to create self-sensing CF textile composites. Damage is sensed by measuring resistance changes in a CF sheet. Contacts are extrusion printed directly on woven CF sheets using silver flake ink. A multiplexed Kelvin Double Bridge circuit is the read-out interface. This allows small resistance changes due to damage to be measured in a four-point configuration. The circuit is connected to the printed contacts on the CF sheet through multiplexers to detect damage in different locations. This 2D digital sensor can detect the location and size of damage holes for SHM. The resolution of the sensor is controlled by the location and spacing of the silver electrodes, which were studied experimentally and by simulation. The resolution is 26 mm in the current direction and 16 mm in the orthogonal direction. The threshold of detectable damage is 4 mm 2 . Simulation of the sensor as an isotropic 2D conductor shows good agreement with experimental results for the orthotropic fabric. The resultant sensing device could be integrated into many composite structures as one of its layers or simply printed on the surface to create smart structures.

Locating cracks in smart TRC elements based on the TDR concept

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Carbon Rovings as Strain Sensor in TRC Structures: Effect of Roving Cross-Sectional Shape and Coating Material on the Electrical Response under Bending Stress

Structural Health Monitoring Using Textile Reinforcement Structures with Integrated Optical Fiber Sensors

Crack Detection of Reinforced Concrete Structure Using Smart Skin

Nondestructive Testing and Predictability of Microcracks in Carbon Fiber-Reinforced Composites via Terahertz Time-Domain Spectroscopy

Damage location sensing in carbon fiber composites using extrusion printed electronics

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Distributed cracks detection by BOTDA and its application in corrosion cracking monitoring

Tensile damage self-monitoring of carbon fiber/epoxy 3D braided composites with electrical resistance method

A Novel “Smart Skin” Sensor for Chipless RFID-Based Structural Health Monitoring Applications

Textile-based strain sensors for fiber-reinforced composites under tension, compression and bending

Smart Self-Sensing Piezoresistive Composite Materials for Structural Health Monitoring

Structural health monitoring of carbon fiber reinforced matrix by the resistance variation method

Detection of Fatigue Cracks for Concrete Structures by Using Carbon Ink-Based Conductive Skin and Electrical Resistance Tomography

The Experimental Verification of Direct-Write Silver Conductive Grid and ARIMA Time Series Analysis for Crack Propagation

Time Reverse Modeling of Acoustic Waves for Enhanced Mapping of Cracking Sound Events in Textile Reinforced Concrete

Investigation of the Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry, and Fiber Optic Sensing

Scalable and passive carbon nanotube thin-film sensor for detecting micro-strains and potential impact damage in fiber-reinforced composite materials

Cracks monitoring in reinforced concrete structure with optical fibers patch

Integration of carbon nanotube yarns into glass‐fiber reinforced composites for electrical self‐sensing of damage under cyclic bending and impact loading