Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

Facet Orientation and Intermediate Phase Regulation via a Green Antisolvent for High‐Performance Perovskite Solar Cells

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

The Mechanism of Universal Green Antisolvents for Intermediate Phase Controlled High-Efficiency Formamidinium-Based Perovskite Solar Cells

Green antisolvent additive engineering to improve the performance of perovskite solar cells

Crystallization Kinetics of Perovskite Films by a Green Mixture Antisolvent for Efficient NiO x -Based Inverted Solar Cells

Tryptaminium Iodide As an Additive of Isopropanol Green Antisolvent for Efficient and Stable Perovskite Solar Cells

Antisolvent engineering on low-temperature processed CsPbI 3 inorganic perovskites for improved performances of solar cells

Manipulating the Film Morphology Evolution Toward Green Solvent‐processed Perovskite Solar Cells

Improving stability of perovskite solar cells using BMIMBF 4 /IPA as green mixed anti-solvent

Antisolvents Treatment of Cs 0.15 FA 0.85 PbI 3 Boosting Efficiency for Perovskite Solar Cells

Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

Strain relaxation and phase regulation in quasi-2D perovskites for efficient solar cells

Solvent-engineering-processed CsPbIBr2 Inorganic Perovskite Solar Cells with Efficiency of ∼11%

Designing Ionic Liquids As the Solvent for Efficient and Stable Perovskite Solar Cells.

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Solvent Engineering Using a Volatile Solid for Highly Efficient and Stable Perovskite Solar Cells.

Precise Control of Crystallization and Phase-Transition with Green Anti-Solvent in Wide-Bandgap Perovskite Solar Cells with Open-Circuit Voltage Exceeding 1.25 V.

Improving the Stability and Efficiency of Perovskite Solar Cells by Controlling the Crystallization Active Layer with Binary Anti-solvent

Strain Regulation Via Pseudo Halide-Based Ionic Liquid Toward Efficient and Stable -Fapbi3 Inverted Perovskite Solar Cells

Modulation of Nucleation and Crystallization in PbI2 Films Promoting Preferential Perovskite Orientation Growth for Efficient Solar Cells