Abstract:Investigating different pier shapes and debris Finteractions in scour patterns is vital for understanding the risks to bridge stability. This study investigates the impact of different shapes of pier and debris interactions on scour patterns using numerical simulations with flow-3D and controlled laboratory experiments. The model setup is rigorously calibrated against a physical flume experiment, incorporating a steady-state flow as the initial condition for sediment transport simulations. The Fractional Area/Volume Obstacle Representation (FAVOR) technique and the renormalized group (RNG) turbulence model enhance the simulation's precision. The numerical results indicate that pier geometry is a critical factor influencing the scour depth. Among the tested shapes, square piers exhibit the most severe scour, with depths reaching 5.8 cm, while lenticular piers show the least scour, with a maximum depth of 2.5 cm. The study also highlights the role of horseshoe, wake, and shear layer vortices in determining scour locations, with varying impacts across different pier shapes. The Q-criterion study identified debris-induced vortex generation and intensification. The debris amount, thickness, and pier diameter (T/Y) significantly affect the scouring patterns. When dealing with high wedge (HW) debris, square piers have the largest scour depth at T/Y = 0.25, while lenticular piers exhibit a lower scour. When debris is present, the scour depth rises at T/Y = 0.5. Depending on the form of the debris, a significant fluctuation of up to 5 cm was reported. There are difficulties in precisely estimating the scour depth under complicated circumstances because of the disparity between numerical simulations and actual data, which varies from 6% for square piers with a debris relative thickness T/Y = 0.25 to 32% for cylindrical piers with T/Y = 0.5. The study demonstrates that while flow-3D simulations align reasonably well with the experimental data under a low debris impact, discrepancies increase with more complex debris interactions and higher submersion depths, particularly for cylindrical piers. The novelty of this work lies in its comprehensive approach to evaluating the effects of different pier shapes and debris interactions on scour patterns, offering new insights into the effectiveness of flow-3D simulations in predicting the scour patterns under varying conditions.

Experimental and theoretical study of sediment scour around angled bridge piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Effects of pier inclination angle and direction on local scour at rectangular and circular piers

Effects of Pier Geometry and Debris on Scour Depth

Investigating the design and arrangement of dual submerged vanes as mitigation countermeasure of bridge pier scour depth using a numerical approach

An experimental comparison of 3D velocity components around single and twin piers installed in a sharp bend under the influence of upstream implemented vanes

Scouring and bed morphology dynamics in a sharp bend with collared pier under unsteady flow

Experimental analysis of scour under circular pier

Numerical analysis of local scour around complex piers for a sea-crossing bridge

Efficacy of the Combined Use of Bed Sill and Sacrificial Piles to Control Local Scour around Circular Bridge Piers

Impact of installing new scour prevention countermeasure (F-jacks) around bridge pier on flow pattern and scour control

Estimation of Maximum Local Scour Depths at Multiple Piles of Sea/Bay-crossing Bridges

Experimental Study of Local Scour Around Four Piles Under Different Attack Angles and Gap Ratios

Studying Scour Hole Development around Rectangular Bridge Piers

Study on the method to validate the pier local scour model in the strong tide region:A case study of the piers local scour of Hangzhou Bay sea-crossing bridge

Effect of debris accumulation on scour evolution at bridge pier in bank proximity

Experimental Study on Local Scour Depth Around Pile Groups

Collars for Scour Reduction Around Different Shapes of Bridge Piers in a 180° Sharp Bend

Numerical investigation of local scour around tandem piers using proposed self-sustaining inlet turbulent boundary conditions

Numerical simulation of scour effect on different types of piers

Three-dimensional analysis of coherent turbulent flow structure around a single circular bridge pier