Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Stiffness and ultimate strength of multi-ring-stiffened tube-gusset X-joints with dual-function stiffeners

Ultimate strength of CFST-gusset plate joints with ring stiffener plates under tension

Demand on Stiffeners in Stiffened Extended End-Plate Connections

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Experimental study and theoretical analysis of ultimate strength of steel tubular K-joints of tall towers

Ultimate Bearing Capacity of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates Subjected to Brace Compression

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Internal Force Transfer Mechanism and Bearing Capacity of Vertical Stiffener Joints in CFDST Structures

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

Static behavior of large-diameter stiffened steel tubes for wind turbine towers under combined compression-bending-torsion load

Experimental Investigation of Concrete-Filled Steel Tubular Longitudinal Gusset Plate Connections

Experimental and analytical investigation of stiffened steel tubes for wind turbine towers under compression-bending load

Compressive behavior of stiffened steel tubes for wind turbine towers

Stability Design of Axially Loaded Stringer-Stiffened Moderately-Thick Cylindrical Shells in Steel Tubular Transmission Towers

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Experimental Study on Tensile Fracture Mechanism of Butt Joints in Multi-Celled CFST Walls

Experimental and numerical study on static behaviour of uniplanar CFDST-CHS T-joints