Abstract:Heterogeneous electrocatalytic reactions only occur at the interface between the electrocatalyst and reactant. Therefore, the active sites are only necessary to be distributed on the surface of the electrocatalyst. Based on this motivation, here, we demonstrate a systematic study on surface tuning for a carbon-based electrocatalyst from metal-free (with the heteroatoms N and S, NS/C) to metal-containing surfaces (with Co, N, and S, CoNS/C). The CoNS/C electrocatalyst was obtained by pyrolyzing the Co precoordinated and p-toluenesulfonate-doped polypyrrole (PPy). It was found that the coordination of Co on the PPy ring tuned the final carbon electrocatalyst into a catalyst with a CoNx moiety-rich surface. In addition, the as-synthesized CoNS/C was determined to have a very high loading of cobalt up to 2.02 wt %. The pyrolysis of the cobalt-containing precursor tends to proceed toward a characteristic of a higher sp2 carbon content, a higher surface area, and more nitrogen as well as active nitrogen sites than its metal-free counterpart. The most distinguished feature for such a catalyst is that the truly most active component is only distributed on the surface, in contrast with that of the conventional metal–N-based catalyst present throughout the bulky structure. Especially, the electrocatalytic activity toward oxygen evolution reaction (OER) has been investigated experimentally and theoretically. The results showed that the OER performance of the carbon-based electrocatalyst was remarkably boosted after the introduction of Co with an overpotential decrease from 678 to 345 mV at 10 mA cm–2. Furthermore, CoNS/C displayed an excellent durability upon a long-term measurement. The apparent activation energy measurements revealed that the metal-rich surface contributed to overcome the energy barrier for OER. In addition, density functional theory calculations have been conducted to explain the correlated OER mechanism. This study is expected to provide an effective strategy for the design and the synthesis of highly active metal–nitrogen-type electrocatalysts with a high metal loading for various electrocatalytic reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17599?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17599</a>.Raman spectra and XRD patterns of NS/C and CoNS/C; SEM and HR-TEM images of NS/C; XPS survey spectrum of CoNS/C; TGA curves of CoNS/C and etched CoNS/C; calculated mass content of Co according to TGA; survey XPS spectrum and high-resolution C 1s, N 1s, and S 2p of NS/C; N2 sorption isotherms and BJH desorption pore size distributions of NS/C and CoNS/C; RRDE measurement of the Co–PPy electrode toward OER; LSV curves of CoNS/C electrocatalysts synthesized with various temperatures toward OER; content of N determined using XPS spectra in CoNS/C with different pyrolysis temperatures; fitted parameters for EIS results; LSV curves of CoNS/C and etched CoNS/C toward OER; summary of the overpotentials of the various electrodes at 10 mA cm–2; temperature-dependent LSV curves of the corresponding fittings of activation energy of NS/C, CoNS/C, and RuO2 toward OER; ADT tests of NS/C toward OER; SEM image of CoNS/C and NS/C after the ADT test; survey XPS spectrum and high-resolution N 1s and Co 2p of CoNS/C after the test; DFT calculations; and summary of the OER activity comparison for recent various advanced non-precious-metal-based electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17599/suppl_file/am0c17599_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enriching Atomic Cobalt in an Ultrathin Porous Carbon Shell for Enhanced Electrocatalysis

Experimental and theoretical insights into cobalt nanoparticles encapsulated in N- and S-codoped carbon as advanced bifunctional electrocatalyst for rechargeable zinc-air batteries

Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

Engineering the morphology and electronic structure of atomic cobalt-nitrogen-carbon catalyst with highly accessible active sites for enhanced oxygen reduction

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

Facile synthesis of three-dimensional Co/N co-doped carbon nanocuboid for enhanced oxygen reduction reaction

Co nanoparticle embedded in atomically-dispersed Co-N-C nanofibers for oxygen reduction with high activity and remarkable durability

Synergistically Enhanced Oxygen Reduction Electrocatalysis by Atomically Dispersed and Nanoscaled Co Species in Three-Dimensional Mesoporous Co, N-codoped Carbon Nanosheets Network

Ultralong nitrogen/sulfur Co‐doped carbon nano‐hollow‐sphere chains with encapsulated cobalt nanoparticles for highly efficient oxygen electrocatalysis

A “MOFs plus ZIFs” Strategy toward Ultrafine Co Nanodots Confined into Superficial N-Doped Carbon Nanowires for Efficient Oxygen Reduction

Nitrogen-Doped Carbon Nanotubes Encapsulated Cobalt Nanoparticles Hybrids for Highly Efficient Catalysis of Oxygen Reduction Reaction

Densely Populated Isolated Single CoN Site for Efficient Oxygen Electrocatalysis

Earthworm‐Inspired Co/Co3O4/CoF2@NSC Nanofibrous Electrocatalyst with Confined Channels for Enhanced ORR/OER Performance

MOF Structure Engineering to Synthesize CoNC Catalyst with Richer Accessible Active Sites for Enhanced Oxygen Reduction

Surface Tuning to Promote the Electrocatalysis for Oxygen Evolution Reaction: From Metal-Free to Cobalt-Based Carbon Electrocatalysts

Cobalt Nanoparticles Embedded in N, S Co‐Doped Carbon Towards Oxygen Reduction Reaction Derived by in Situ Reducing Cobalt Sulfide

Mitigating Co Metal Particle Agglomeration and Enhancing ORR Catalytic Activity through Nitrogen-Enriched Porous Carbon Derived from Biomass

Core-Shell ZIF-67@ZIF-8-derived multi-dimensional cobalt-nitrogen doped hierarchical carbon nanomaterial for efficient oxygen reduction reaction

ZIF67@MFC-Derived Co/N-C@CNFs Interconnected Frameworks with Graphitic Carbon-Encapsulated Co Nanoparticles as Highly Stable and Efficient Electrocatalysts for Oxygen Reduction Reactions

Nitrogen and Carbon Co-Doped CoO x Nanostructures for Oxygen Reduction

A highly efficient axial coordinated CoN5 electrocatalyst via pyrolysis-free strategy for alkaline polymer electrolyte fuel cells